cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
jwalitt
New Member

created a new Form in a group - how do I access that Form in Flow?

I created a new Form in a group, but I don't see that Form in the dropdown list when I start my Flow with the "Microsoft Forms when a new response is submitted" trigger.

I realize that until recently, Forms were only created in the stand-alone Sharepoint Forms area, but now they can be created in Groups, which is great. But they should be accessible in Flow, just like any other Form.

 

For example, I created a Form called "Test Form 9-18-17" in my XYZ group. But "Test Form 9-18-17" is not showing in the dropdown list when I adde the "Microsoft Forms when a new response is submitted" trigger.

 

Ideas?  Is there support for this?

2 ACCEPTED SOLUTIONS

Accepted Solutions
v-micsh-msft
Community Support
Community Support

Hi @jwalitt,

 

I think here you mean the SharePoint form?

The trigger you mentioned is for the following product:

https://forms.office.com/

 

If here you mean to work with the Microsoft SharePoint Data Forms, then this is not supported.

Check the article below:

https://support.office.com/en-us/article/Create-data-forms-using-SharePoint-Designer-5b5e3970-af22-4...

"

Data Views inserted as forms can be created for SharePoint lists and libraries, database connections, and local XML documents. They do not, however, support SOAP and REST Web service connections. 

"

While Flow is built under REST Web service connections.

 

Regards,

Michael

Community Support Team _ Michael Shao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

tpalmer
Power Automate
Power Automate

Hi all - Forms created in Groups are not currently supported in the Forms connector, please add the suggestion to our ideas page so other users can vote on it as well! https://powerusers.microsoft.com/t5/Flow-Ideas/idb-p/FlowIdeas 

View solution in original post

34 REPLIES 34
v-micsh-msft
Community Support
Community Support

Hi @jwalitt,

 

I think here you mean the SharePoint form?

The trigger you mentioned is for the following product:

https://forms.office.com/

 

If here you mean to work with the Microsoft SharePoint Data Forms, then this is not supported.

Check the article below:

https://support.office.com/en-us/article/Create-data-forms-using-SharePoint-Designer-5b5e3970-af22-4...

"

Data Views inserted as forms can be created for SharePoint lists and libraries, database connections, and local XML documents. They do not, however, support SOAP and REST Web service connections. 

"

While Flow is built under REST Web service connections.

 

Regards,

Michael

Community Support Team _ Michael Shao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
joeeasley
Regular Visitor

Not Solved - when i create a flow in a Team that i am the owner of, i cannot see it in flow when logged in as myself. 

PaullyD
New Member

I have experienced the same problem, I can see forms I have created "My Forms" but I can't see forms I created in a group in a Team for example.

tpalmer
Power Automate
Power Automate

Hi all - Forms created in Groups are not currently supported in the Forms connector, please add the suggestion to our ideas page so other users can vote on it as well! https://powerusers.microsoft.com/t5/Flow-Ideas/idb-p/FlowIdeas 

I have managed to get this Group Forms to Work in Flow. When you select Form ID, paster the Group Form ID as a Custom Value. You can get the ID from the Form Share Link. Also use Custom Value in the Get Response Details. If all works, you will see the Form Questions from the Group Form which, you can utilize.

 

Capture.PNG

Anonymous
Not applicable

I have the same problem.

I check the link to obtain my groupe id 

 

https://teams.microsoft.com/l/channel/19%3aa838ee030c714dc1911a460c26a62ab6%40thread.skype/Inscripti...

 

I paste 9f8002e5-51ee-4aa5-9d65-4a85a67a68fd in the form Id but i can't see the form question.

 

Where is my error ?

THanks, this works great. Just paste in everything after Form_ID=

Anonymous
Not applicable

Thank you. it's working now ^^

Glad it worked for you.

Anonymous
Not applicable

Thank you, copying the "Share" link (not the the share as template**) and everything after formID = worked great!

This one line solution saved me days of work!  Never in a million years would I have guessed that using the last bit of the URL for the Form ID would have allowed me to utilize a Group Gorm in a Flow.  🙂

Welcome

Anonymous
Not applicable

I am also trying to use group form to create item in microsoft flow. The method above works for me one day, but the next day, the link became broken and i have to fix my flow again. Anyone experienced that? see screenshot below.error.PNG

That link doesn't work.

When do you think this functionality will be available? Seems strange that you can move forms into a group but it doesn't warn you about losing functionality in the process.


@Technovasation wrote:
That link doesn't work.

When do you think this functionality will be available? Seems strange that you can move forms into a group but it doesn't warn you about losing functionality in the process.

sorry, I forgot to respond here. There doesn't seem to be any problem anymore. 

Anonymous
Not applicable

Hi there

This worked for me too until some time ago.
Just pasting the ID of the form.
But now it's not working anymore.
Does someone else experience the same issue? or is it still working for you?

Anonymous
Not applicable

still i am facing this issue i have add below text in form ID

formID = l47e3CCbrE-q0cZVLohNeKgkgbpxxwhImGkBSrHerhdUQjZUWEowTk5IN1ROT0UwS05GNzg2N0RBQy4u

 

let me suggest i am doing right way or soming thing i need to add?

I am having this same problem, any suggestions?

Dean Gross

Office 365- MSCA
SharePoint - MCSE
Microsoft 365 Enterprise Administrator Expert

You need to use the characters AFTER formID=

Rob
Los Gallardos

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Results posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (2,313)