cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Specoop
Advocate II
Advocate II

html to pdf conversion issue

Hello Flow Community! 

 

I'm attempting to convert a .HTML to a .PDF using (Shane Young's method). Here's my flow.

1.jpg

 

When I run it, it creates a beautiful HTML (left side image below). Works perfectly.

 

My issue: When I click on the .PDF (right side image below), it gives me an incomplete table that doesn't look as expected. 

 

2.jpg

 

Full disclosure - this is my first HTML - so my HTML may be the issue...but I've tried a bunch of stull (taking out the styling etc.) and just can't get it anywhere close.

 

Any guidance would be much appreciated.

 

Here's the full Step 2 of the flow:

 

concat('<!DOCTYPE html>
<html>
<head>
<style>
table, th, td {
padding: 3px;
}
table#main {
border: 1.5px solid black;
border-collapse: collapse;
width: 85%;
}
table#main th, td {
border: 1px solid black;
border-collapse: collapse;
}

{table#signature {
width: 80%
}

</style>
</head>
<body>
<center>
<b> Monthly Inspection Report </b>
<br>
<EM>Inspection performed by certified personnel at least once per month</EM>
<br><br>
<table id="main">
<tr>
<th colspan="4">Project Information </th></tr>
<tr>
<td>Date: </td>
<td><em><center> POWERAPPS </center></em> </td>
<td>Project Name:</td>
<td><em><center> POWERAPPS </center> </em> </td></tr>
<tr>
<td colspan="4">Project Location:<em> POWERAPPS </em></td></tr>
<tr>
<th colspan="4">Inspection Observations</th>
<tr>
<td rowspan="2">Rainfall within past 24 hours (inches):</td>
<td rowspan="2"><em><center> POWERAPPS </center></em></td>
<td> Is rainfall greater than 0.5 inches?: </td>
<td><EM><center> POWERAPPS </center> </EM></td>
 
<tr>
<td> Inspection Required </td>
<td> <em><center> Yes </center> </em></td> </tr>
<tr>
<th colspan="4">Inspection Observations</th></tr>
<tr>
<td colspan="4"> Areas that have undergone final stabilization:</td></tr>
<tr>
<td colspan="3"> Are all permanent stabilization controls contained in Plan in place? </td>
<td colspan="1"> <em><center> POWERAPPS </center></em></td></tr>
<tr>
<td colspan="4"> If no, describe the location(s) of deficiencies and corrective actions that must be taken: </td></tr>
<tr>
<td colspan="4", height="70"> <em><center> POWERAPPS </center></em> </td></tr>
<tr>
<td colspan="4"> Other Observations: </td> </tr>
<tr>
<td colspan="3"> Are pollutants entering the drainage system or receiving waters? </td>
<td colspan="1"> <em><center> POWERAPPS </center></em></td> </tr>
<tr>
<td colspan="4"> If yes, describe the location(s) and the corrective actions that must be taken.</td> </tr>
<tr>
<td colspan="4", height="50"> <em><center> POWERAPPS </center></em></td></tr>
<tr>
<td colspan="3"> Are all erosion and sediment control measures operating properly? </td>
<td colspan="1"> <em><center> POWERAPPS </center></em></td></tr>
<tr>
<td colspan="4"> If no, describe the location(s) and the corrective actions that must be taken.</td></tr>
<tr>
<td colspan="4", height="50"> <em><center> POWERAPPS </center></em> </td> </tr>
<tr>
<td colspan="4"> Other Observations: <em> POWERAPPS </em> </td> </tr>
<tr>
<td colspan="4", height="70"> <em><center> POWERAPPS </center> </em> </td> </tr>
<tr>
<td colspan="2"> Is an Erosion, Sedimentation and Pollution Control Plan revision required?</td>
<td colspan="1"> <em><center> POWERAPPS </center></em> </td>
<td colspan="1"> <center> Date of Revision:<em> POWERAPPS </em></center> </td></tr>
<tr>
<td colspan="4"> Corrective Actions and Date</td></tr>
<tr>
<td colspan="4", height="70"> <em><center> POWERAPPS </center></em></td></tr>
</table>
<br> <br>

<table id="signature">
 
<tr>
<th colspan="2", height="20"> POWERAPPS </th>
<th colspan="2", height="20"> POWERAPPS </th> </tr>
<tr>
<th colspan="2">__________________________________ </th>
<th colspan="2">__________________________________</th> </tr>
<tr>
<th colspan="2">Signature of Certified Personnel </th>
<th colspan="2">Printed Name of Certified Personnel</th> </tr>
</table>
</center>
</body>
</html>
')

 

 

Thanks again for the support and the community.

 

Best,

Spencer

1 ACCEPTED SOLUTION

Accepted Solutions
LeeHarris
Solution Sage
Solution Sage

Hi @Specoop

 

I managed to get your HTML closer to what you want, there were some issues with <tr> tags, though its still not perfect. For some reason the second table doesn't display when converted to the PDF.

 

<html>
	<head>
		<style>

#main {
border: 1.5px solid black;
border-collapse: collapse;
width: 85%;
margin-left: auto;
margin-right: auto;
}

#main th, #main td {
border: 1px solid black;
border-collapse: collapse;
}

#signature {
width: 80%;
margin-left: auto;
margin-right: auto;
}

		</style>
	</head>
	<body>
		<center>
			<b> Monthly Inspection Report </b>
			<br>
				<EM>Inspection performed by certified personnel at least once per month</EM>
				<br>
					<br>
						<table id="main">
							<tr>
								<th colspan="4">Project Information </th>
							</tr>
							<tr>
								<td>Date: </td>
								<td>
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
								<td>Project Name:</td>
								<td>
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="4">Project Location:<em> POWERAPPS </em>
								</td>
							</tr>
							<tr>
								<th colspan="4">Inspection Observations</th>
							</tr>
							<tr>
								<td rowspan="2">Rainfall within past 24 hours (inches):</td>
								<td rowspan="2">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
								<td> Is rainfall greater than 0.5 inches?: </td>
								<td>
									<EM>
										<center> POWERAPPS </center>
									</EM>
								</td>
							</tr>
							<tr>
								<td> Inspection Required </td>
								<td>
									<em>
										<center> Yes </center>
									</em>
								</td>
							</tr>
							<tr>
								<th colspan="4">Inspection Observations</th>
							</tr>
							<tr>
								<td colspan="4"> Areas that have undergone final stabilization:</td>
							</tr>
							<tr>
								<td colspan="3"> Are all permanent stabilization controls contained in Plan in place? </td>
								<td colspan="1">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="4"> If no, describe the location(s) of deficiencies and corrective actions that must be taken: </td>
							</tr>
							<tr>
								<td colspan="4", height="70">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="4"> Other Observations: </td>
							</tr>
							<tr>
								<td colspan="3"> Are pollutants entering the drainage system or receiving waters? </td>
								<td colspan="1">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="4"> If yes, describe the location(s) and the corrective actions that must be taken.</td>
							</tr>
							<tr>
								<td colspan="4", height="50">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="3"> Are all erosion and sediment control measures operating properly? </td>
								<td colspan="1">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="4"> If no, describe the location(s) and the corrective actions that must be taken.</td>
							</tr>
							<tr>
								<td colspan="4", height="50">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="4"> Other Observations: <em> POWERAPPS </em>
								</td>
							</tr>
							<tr>
								<td colspan="4", height="70">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="2"> Is an Erosion, Sedimentation and Pollution Control Plan revision required?</td>
								<td colspan="1">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
								<td colspan="1">
									<center> Date of Revision:<em> POWERAPPS </em>
									</center>
								</td>
							</tr>
							<tr>
								<td colspan="4"> Corrective Actions and Date</td>
							</tr>
							<tr>
								<td colspan="4", height="70">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>

						</table>
						<br>
							<br>

								<table id="signature">

									<tr>
										<th colspan="2", height="20"> POWERAPPS </th>
										<th colspan="2", height="20"> POWERAPPS </th>
									</tr>

									<tr>
										<th colspan="2">__________________________________ </th>
										<th colspan="2">__________________________________</th>
									</tr>
									<tr>
										<th colspan="2">Signature of Certified Personnel </th>
										<th colspan="2">Printed Name of Certified Personnel</th>
									</tr>
									<tr>

									</table>
								</center>
							</body>
						</html>

Did I answer your question? Mark my post as a solution!

Follow me on Twitter at @QG_LeeJHarris

Or on LinkedIn at in/leejharris

View solution in original post

10 REPLIES 10
v-yamao-msft
Community Support
Community Support

Hi @Specoop,

 

I am afraid that there might be something wrong with the HTML table code you are using in Step 2.

When testing with the code you provided on my side, both the html file and pdf file display the same incomplete table as you mentioned.

However, it works fine when using the following example code:

 

concat('<!DOCTYPE html>

<html>

<head>

<style>

table {

  font-family: arial, sans-serif;

  border-collapse: collapse;

  width: 100%;

}

 

td, th {

  border: 1px solid #dddddd;

  text-align: left;

  padding: 8px;

}

 

tr:nth-child(even) {

  background-color: #dddddd;

}

</style>

</head>

<body>

 

<h2>HTML Table</h2>

 

<table>

  <tr>

    <th>Company</th>

    <th>Contact</th>

    <th>Country</th>

  </tr>

  <tr>

    <td>Alfreds Futterkiste</td>

    <td>Maria Anders</td>

    <td>Germany</td>

  </tr>

  <tr>

    <td>Centro comercial Moctezuma</td>

    <td>Francisco Chang</td>

    <td>Mexico</td>

  </tr>

  <tr>

    <td>Ernst Handel</td>

    <td>Roland Mendel</td>

    <td>Austria</td>

  </tr>

  <tr>

    <td>Island Trading</td>

    <td>Helen Bennett</td>

    <td>UK</td>

  </tr>

  <tr>

    <td>Laughing Bacchus Winecellars</td>

    <td>Yoshi Tannamuri</td>

    <td>Canada</td>

  </tr>

  <tr>

    <td>Magazzini Alimentari Riuniti</td>

    <td>Giovanni Rovelli</td>

    <td>Italy</td>

  </tr>

</table>

 

</body>

</html>

')

 

Please check your HTML table code and try again with it.

 

Best regards,

Mabel

 

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Thank you Mabel!

 

I tried your provided example 

 

 

Here's the HTML (looks great)

3.jpg

 

Here's the PDF (missing styling)

4.jpg

Does yours lose formatting also when it converts?

 

Thanks again,

Hi @Specoop,

 

Both the HTML file and PDF file are in the same format likes below:

1.PNG 

 

Best regards,

Mabel

 

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
LeeHarris
Solution Sage
Solution Sage

Hi @Specoop

 

I managed to get your HTML closer to what you want, there were some issues with <tr> tags, though its still not perfect. For some reason the second table doesn't display when converted to the PDF.

 

<html>
	<head>
		<style>

#main {
border: 1.5px solid black;
border-collapse: collapse;
width: 85%;
margin-left: auto;
margin-right: auto;
}

#main th, #main td {
border: 1px solid black;
border-collapse: collapse;
}

#signature {
width: 80%;
margin-left: auto;
margin-right: auto;
}

		</style>
	</head>
	<body>
		<center>
			<b> Monthly Inspection Report </b>
			<br>
				<EM>Inspection performed by certified personnel at least once per month</EM>
				<br>
					<br>
						<table id="main">
							<tr>
								<th colspan="4">Project Information </th>
							</tr>
							<tr>
								<td>Date: </td>
								<td>
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
								<td>Project Name:</td>
								<td>
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="4">Project Location:<em> POWERAPPS </em>
								</td>
							</tr>
							<tr>
								<th colspan="4">Inspection Observations</th>
							</tr>
							<tr>
								<td rowspan="2">Rainfall within past 24 hours (inches):</td>
								<td rowspan="2">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
								<td> Is rainfall greater than 0.5 inches?: </td>
								<td>
									<EM>
										<center> POWERAPPS </center>
									</EM>
								</td>
							</tr>
							<tr>
								<td> Inspection Required </td>
								<td>
									<em>
										<center> Yes </center>
									</em>
								</td>
							</tr>
							<tr>
								<th colspan="4">Inspection Observations</th>
							</tr>
							<tr>
								<td colspan="4"> Areas that have undergone final stabilization:</td>
							</tr>
							<tr>
								<td colspan="3"> Are all permanent stabilization controls contained in Plan in place? </td>
								<td colspan="1">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="4"> If no, describe the location(s) of deficiencies and corrective actions that must be taken: </td>
							</tr>
							<tr>
								<td colspan="4", height="70">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="4"> Other Observations: </td>
							</tr>
							<tr>
								<td colspan="3"> Are pollutants entering the drainage system or receiving waters? </td>
								<td colspan="1">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="4"> If yes, describe the location(s) and the corrective actions that must be taken.</td>
							</tr>
							<tr>
								<td colspan="4", height="50">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="3"> Are all erosion and sediment control measures operating properly? </td>
								<td colspan="1">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="4"> If no, describe the location(s) and the corrective actions that must be taken.</td>
							</tr>
							<tr>
								<td colspan="4", height="50">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="4"> Other Observations: <em> POWERAPPS </em>
								</td>
							</tr>
							<tr>
								<td colspan="4", height="70">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>
							<tr>
								<td colspan="2"> Is an Erosion, Sedimentation and Pollution Control Plan revision required?</td>
								<td colspan="1">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
								<td colspan="1">
									<center> Date of Revision:<em> POWERAPPS </em>
									</center>
								</td>
							</tr>
							<tr>
								<td colspan="4"> Corrective Actions and Date</td>
							</tr>
							<tr>
								<td colspan="4", height="70">
									<em>
										<center> POWERAPPS </center>
									</em>
								</td>
							</tr>

						</table>
						<br>
							<br>

								<table id="signature">

									<tr>
										<th colspan="2", height="20"> POWERAPPS </th>
										<th colspan="2", height="20"> POWERAPPS </th>
									</tr>

									<tr>
										<th colspan="2">__________________________________ </th>
										<th colspan="2">__________________________________</th>
									</tr>
									<tr>
										<th colspan="2">Signature of Certified Personnel </th>
										<th colspan="2">Printed Name of Certified Personnel</th>
									</tr>
									<tr>

									</table>
								</center>
							</body>
						</html>

Did I answer your question? Mark my post as a solution!

Follow me on Twitter at @QG_LeeJHarris

Or on LinkedIn at in/leejharris

Thank you both!

LeeHarris, you're updated code got me there (or at least really darn close).  I really appreciate the help.

 

See below for final code on second table that appeared in both the HTML and PDF.

 

You're awesome! Sending you a PM.

 

<table id="signature">

<tr>

<th> POWERAPPS </th>

<th> POWERAPPS </th>

</tr>

<tr><th>__________________________________ </th>                                                                                                                                                <th>__________________________________</th>

</tr>

<tr>

<th>Signature of Certified Personnel </th>

<th>Printed Name of Certified Personnel</th>

</tr>

</table>

</center>

</body>

</html>

Anonymous
Not applicable

I'm experiencing a similar issue. I can't get one of my rowspans to format properly when converted to a pdf through flow. It looks perfectly fine when using an online html viewer

 

Here is the resulting code from my powerapp

<style>
    table,
    th,
    td {
        border-style: solid;
        border-width: 1px;
        text-align: left;
        border-collapse: collapse;
        padding: 10px 5px;
    }
    
    .noborder {
        border-style: none;
    }
</style>
<h1>T-Mobile</h1>
<h2>DRIVER'S VEHICLE INSPECTION REPORT</h2>
<div>AS REQUIRED BY THE D.O.T FEDERAL MOTOR CARRIER SAFETY REGULATIONS</div>
<br>
<div><b>MARKET LOCATION: </b>AL</div>
<div><b>DRIVER'S NAME: </b>Justin Cole</div>
<div><b>Date: </b>7/10/2019<b> Time: </b>15:02</div>
<div><b>Truck/SUV NO.: </b>51651<b> ODOMETER READING: </b>6541</div>
<div><font SIZE='.1'>CHECK ANY DEFECTIVE ITEM AND GIVE DETAILS UNDER 'REMARKS'</font></div>
<table class='tg'>
    <tr>
        <td></td>
        <td>Air Compressor</td>
        <td></td>
        <td>Front Axle</td>
        <td rowspan='6'></td>
        <td rowspan='6'>Safety Equipment
            <ul>
                <li>Fire Extinguisher</li>
                <li>Flags - Flares - Fuses</li>
                <li>Reflective Triangles</li>
                <li>Spare Bulbs and Fuses</li>
                <li>Spare Seal Beam</li>
            </ul>
        </td>
    </tr>
    <tr>
        <td></td>
        <td>Air Lines</td>
        <td></td>
        <td>Fuel Tanks</td>
    </tr>
    <tr>
        <td></td>
        <td>Battery</td>
        <td></td>
        <td>Horn</td>
    </tr>
    <tr>
        <td></td>
        <td>Belts and Hoses</td>
        <td rowspan='5'></td>
        <td rowspan='5'>Lights
            <ul>
                <li>Head/Stop</li>
                <li>Tail/Dash</li>
                <li>Turn Indicators</li>
                <li>Clearance/Marker</li>
            </ul>
        </td>
    </tr>
    <tr>
        <td></td>
        <td>Body</td>
    </tr>
    <tr>
        <td></td>
        <td>Brake Accessories</td>
    </tr>
    <tr>
        <td>X</td>
        <td>Brakes, Parking</td>
        <td></td>
        <td>Starter</td>
    </tr>
    <tr>
        <td></td>
        <td>Brakes, Service</td>
        <td>X</td>
        <td>Steering</td>
    </tr>
    <tr>
        <td></td>
        <td>Clutch</td>
        <td></td>
        <td>Mirrors</td>
        <td></td>
        <td>Suspension System</td>
    </tr>
    <tr>
        <td></td>
        <td>Coupling Devices</td>
        <td></td>
        <td>Muffler</td>
        <td></td>
        <td>Tire Chains</td>
    </tr>
    <tr>
        <td></td>
        <td>Defroster/Heater</td>
        <td></td>
        <td>Oil Pressure</td>
        <td></td>
        <td>Tires</td>
    </tr>
    <tr>
        <td></td>
        <td>Drive Line</td>
        <td>X</td>
        <td>radiator</td>
        <td>X</td>
        <td>Transmission</td>
    </tr>
    <tr>
        <td>X</td>
        <td>Engine</td>
        <td></td>
        <td>Rear End</td>
        <td></td>
        <td>Trip Recorder</td>
    </tr>
    <tr>
        <td></td>
        <td>Exhaust</td>
        <td></td>
        <td>Reflectors</td>
        <td></td>
        <td>Wheels and Rims</td>
    </tr>
    <tr>
        <td></td>
        <td>Fifth Wheel</td>
        <td></td>
        <td></td>
        <td></td>
        <td>Windows</td>
    </tr>
    <tr>
        <td></td>
        <td>Fluid Levels</td>
        <td></td>
        <td></td>
        <td>X</td>
        <td>Windshield Wipers</td>
    </tr>
    <tr>
        <td></td>
        <td>Frame and Assembly</td>
        <td></td>
        <td></td>
        <td></td>
        <td>Other</td>
    </tr>
</table>
<div><b>Trailer Num: </b>84916</div>
<table class='tg'>
    <tr>
        <td></td>
        <td>Brake Connections</td>
        <td></td>
        <td>Hitch</td>
        <td></td>
        <td>Suspension System</td>
    </tr>
    <tr>
        <td></td>
        <td>Brakes</td>
        <td></td>
        <td>Landing Gear</td>
        <td>X</td>
        <td>Tarpaulin</td>
    </tr>
    <tr>
        <td>X</td>
        <td>Coupling Devices</td>
        <td></td>
        <td>Lights - All</td>
        <td></td>
        <td>Tires</td>
    </tr>
    <tr>
        <td></td>
        <td>Coupling (King) Pin</td>
        <td>X</td>
        <td>Reflectors/Reflective Tape</td>
        <td></td>
        <td>Wheels and Rims</td>
    </tr>
    <tr>
        <td></td>
        <td>Doors</td>
        <td></td>
        <td>Roof</td>
        <td></td>
        <td>Other</td>
    </tr>
</table>
<div><b>REMARKS: </b>These are my remarks</div>
<div>
    <table class='noborder'>
        <tr class='noborder'>
            <td class='noborder'>
                <table>
                    <tr>
                        <td></td>
                    </tr>
                </table>
            </td>
            <td class='noborder'>CONDITION OF THE ABOVE VEHICLE IS SATISFACTORY</td>
    </table>
</div>
<div><b>Driver's Signature:</b>_______________________________________</div>
<div>
    <table class='noborder'>
        <tr class='noborder'>
            <td class='noborder'>
                <table>
                    <tr>
                        <td>X</td>
                    </tr>
                </table>
            </td>
            <td class='noborder'> ABOVE DEFECTS CORRECTED</td>
    </table>
</div>
<div>
    <table class='noborder'>
        <tr class='noborder'>
            <td class='noborder'>
                <table>
                    <tr>
                        <td></td>
                    </tr>
                </table>
            </td>
            <td class='noborder'>ABOVE DEFECTS NEED NOT BE CORRECTED FOR SAFE OPERATION OF VEHICLE</td>
    </table>
</div>
<div><b>Mechanic's Signature:</b>____________________________<b>Date:</b>__________</div>
<div><b>Driver's Signature:</b>______________________________<b>Date:</b>__________</div>
nseward
Regular Visitor

I am having a similar formatting issue. 

 

The general idea is that Powerapps collects generates html code, which is then passed into a OneDrive html file in order to be converted to pdf and placed into SharePoint. The html file that is generated has the proper formatting (text over image). The pdf has the text below the image. I've added a snapshot of the flow - with the SharePoint address removed - and the html code.

 

Flow 

Capture.JPG

HTML Code

<!DOCTYPE html>
<html>
<head>
<style>
.container {
position: relative;
text-align: center;
color: black;
}

.stamp {
position: absolute;
top: 95%;
left: 50%;
}

</style>
</head>
<body>

<h2>Report</h2>
<p>April 23, 2020</p>

<div class="container">
<img src="Image Text Holder" alt="Finding" style="width:100%;">
<div class="stamp">April 23,2020</div>
</div>

</body>
</html>

 

 

Any help would be greatly appreciated.

@nseward Have you managed to resolve this issue? I am experiencing a similar problem when trying to display dynamic text on top of an image

Hi There.. I know this is an old topic. but i just want to know how to fix the <TR> tags you are talking about. i have the same issue with my current html conversion to PDF

George7
Regular Visitor

Hi There,

 

the issue is simple, I have resolved that as I was facing the same. PDFsharp 1.50.4845 the library Flow is using for generating PDFs does not support STYLE section in HEADer of HTML. So if you need any styles you have to use them within the tag itself... like <td style='color: black;'> that way all is working as expected... some tags cannot even be in style= but have to be the old old way... like the one colspan - <td style='whatever' colspan='3'.. have this in mind and you will be able to generate almost any style...  

Helpful resources

Announcements

Tuesday Tip: Getting Started with Private Messages & Macros

Welcome to TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   This Week's Tip: Private Messaging & Macros in Power Apps Community   Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member!   Our Knowledge Base article about private messaging and macros is the best place to find out more. Check it out today and discover some key tips and tricks when it comes to messages and macros:   Private Messaging: Learn how to enable private messages in your community profile and ensure you’re connected with other community membersMacros Explained: Discover the convenience of macros—prewritten text snippets that save time when posting in forums or sending private messagesCreating Macros: Follow simple steps to create your own macros for efficient communication within the Power Apps CommunityUsage Guide: Understand how to apply macros in posts and private messages, enhancing your interaction with the Community For detailed instructions and more information, visit the full page in your community today:Power Apps: Enabling Private Messaging & How to Use Macros (Power Apps)Power Automate: Enabling Private Messaging & How to Use Macros (Power Automate)  Copilot Studio: Enabling Private Messaging &How to Use Macros (Copilot Studio) Power Pages: Enabling Private Messaging & How to Use Macros (Power Pages)

Tuesday Tip: Subscriptions & Notifications

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week: All About Subscriptions & Notifications We don't want you to a miss a thing in the Community! The best way to make sure you know what's going on in the News & Announcements, to blogs you follow, or forums and galleries you're interested in is to subscribe! These subscriptions ensure you receive automated messages about the most recent posts and replies. Even better, there are multiple ways you can subscribe to content and boards in the community! (Please note: if you have created an AAD (Azure Active Directory) account you won't be able to receive e-mail notifications.)   Subscribing to a Category  When you're looking at the entire category, select from the Options drop down and choose Subscribe.     You can then choose to Subscribe to all of the boards or select only the boards you want to receive notifications. When you're satisfied with your choices, click Save.     Subscribing to a Topic You can also subscribe to a single topic by clicking Subscribe from the Options drop down menu, while you are viewing the topic or in the General board overview, respectively.     Subscribing to a Label Find the labels at the bottom left of a post.From a particular post with a label, click on the label to filter by that label. This opens a window containing a list of posts with the label you have selected. Click Subscribe.     Note: You can only subscribe to a label at the board level. If you subscribe to a label named 'Copilot' at board #1, it will not automatically subscribe you to an identically named label at board #2. You will have to subscribe twice, once at each board.   Bookmarks Just like you can subscribe to topics and categories, you can also bookmark topics and boards from the same menus! Simply go to the Topic Options drop down menu to bookmark a topic or the Options drop down to bookmark a board. The difference between subscribing and bookmarking is that subscriptions provide you with notifications, whereas bookmarks provide you a static way of easily accessing your favorite boards from the My subscriptions area.   Managing & Viewing Your Subscriptions & Bookmarks To manage your subscriptions, click on your avatar and select My subscriptions from the drop-down menu.     From the Subscriptions & Notifications tab, you can manage your subscriptions, including your e-mail subscription options, your bookmarks, your notification settings, and your email notification format.     You can see a list of all your subscriptions and bookmarks and choose which ones to delete, either individually or in bulk, by checking multiple boxes.     A Note on Following Friends on Mobile Adding someone as a friend or selecting Follow in the mobile view does not allow you to subscribe to their activity feed. You will merely be able to see your friends’ biography, other personal information, or online status, and send messages more quickly by choosing who to send the message to from a list, as opposed to having to search by username.

Monthly Community User Group Update | April 2024

The monthly Community User Group Update is your resource for discovering User Group meetings and events happening around the world (and virtually), welcoming new User Groups to our Community, and more! Our amazing Community User Groups are an important part of the Power Platform Community, with more than 700 Community User Groups worldwide, we know they're a great way to engage personally, while giving our members a place to learn and grow together.   This month, we welcome 3 new User Groups in India, Wales, and Germany, and feature 8 User Group Events across Power Platform and Dynamics 365. Find out more below. New Power Platform User Groups   Power Platform Innovators (India) About: Our aim is to foster a collaborative environment where we can share upcoming Power Platform events, best practices, and valuable content related to Power Platform. Whether you’re a seasoned expert or a newcomer looking to learn, this group is for you. Let’s empower each other to achieve more with Power Platform. Join us in shaping the future of digital transformation!   Power Platform User Group (Wales) About: A Power Platform User Group in Wales (predominantly based in Cardiff but will look to hold sessions around Wales) to establish a community to share learnings and experience in all parts of the platform.   Power Platform User Group (Hannover) About: This group is for anyone who works with the services of Microsoft Power Platform or wants to learn more about it and no-code/low-code. And, of course, Microsoft Copilot application in the Power Platform.   New Dynamics365 User Groups   Ellucian CRM Recruit UK (United Kingdom) About: A group for United Kingdom universities using Ellucian CRM Recruit to manage their admissions process, to share good practice and resolve issues.    Business Central Mexico (Mexico City) About:  A place to find documentation, learning resources, and events focused on user needs in Mexico. We meet to discuss and answer questions about the current features in the standard localization that Microsoft provides, and what you only find in third-party locations. In addition, we focus on what's planned for new standard versions, recent legislation requirements, and more. Let's work together to drive request votes for Microsoft for features that aren't currently found—but are indispensable.   Dynamics 365 F&O User Group (Dublin) About: The Dynamics 365 F&O User Group - Ireland Chapter meets up in person at least twice yearly in One Microsoft Place Dublin for users to have the opportunity to have conversations on mutual topics, find out what’s new and on the Dynamics 365 FinOps Product Roadmap, get insights from customer and partner experiences, and access to Microsoft subject matter expertise.  Upcoming Power Platform Events    PAK Time (Power Apps Kwentuhan) 2024 #6 (Phillipines, Online) This is a continuation session of Custom API. Sir Jun Miano will be sharing firsthand experience on setting up custom API and best practices. (April 6, 2024)       Power Apps: Creating business applications rapidly (Sydney) At this event, learn how to choose the right app on Power Platform, creating a business application in an hour, and tips for using Copilot AI. While we recommend attending all 6 events in the series, each session is independent of one another, and you can join the topics of your interest. Think of it as a “Hop On, Hop Off” bus! Participation is free, but you need a personal computer (laptop) and we provide the rest. We look forward to seeing you there! (April 11, 2024)     April 2024 Cleveland Power Platform User Group (Independence, Ohio) Kickoff the meeting with networking, and then our speaker will share how to create responsive and intuitive Canvas Apps using features like Variables, Search and Filtering. And how PowerFx rich functions and expressions makes configuring those functionalities easier. Bring ideas to discuss and engage with other community members! (April 16, 2024)     Dynamics 365 and Power Platform 2024 Wave 1 Release (NYC, Online) This session features Aric Levin, Microsoft Business Applications MVP and Technical Architect at Avanade and Mihir Shah, Global CoC Leader of Microsoft Managed Services at IBM. We will cover some of the new features and enhancements related to the Power Platform, Dataverse, Maker Portal, Unified Interface and the Microsoft First Party Apps (Microsoft Dynamics 365) that were announced in the Microsoft Dynamics 365 and Power Platform 2024 Release Wave 1 Plan. (April 17, 2024)     Let’s Explore Copilot Studio Series: Bot Skills to Extend Your Copilots (Makati National Capital Reg... Join us for the second installment of our Let's Explore Copilot Studio Series, focusing on Bot Skills. Learn how to enhance your copilot's abilities to automate tasks within specific topics, from booking appointments to sending emails and managing tasks. Discover the power of Skills in expanding conversational capabilities. (April 30, 2024)   Upcoming Dynamics365 Events    Leveraging Customer Managed Keys (CMK) in Dynamics 365 (Noida, Uttar Pradesh, Online) This month's featured topic: Leveraging Customer Managed Keys (CMK) in Dynamics 365, with special guest Nitin Jain from Microsoft. We are excited and thankful to him for doing this session. Join us for this online session, which should be helpful to all Dynamics 365 developers, Technical Architects and Enterprise architects who are implementing Dynamics 365 and want to have more control on the security of their data over Microsoft Managed Keys. (April 11, 2024)       Stockholm D365 User Group April Meeting (Stockholm) This is a Swedish user group for D365 Finance and Operations, AX2012, CRM, CE, Project Operations, and Power BI.  (April 17, 2024)         Transportation Management in D365 F&SCM Q&A Session (Toronto, Online) Calling all Toronto UG members and beyond! Join us for an engaging and informative one-hour Q&A session, exclusively focused on Transportation Management System (TMS) within Dynamics 365 F&SCM. Whether you’re a seasoned professional or just curious about TMS, this event is for you. Bring your questions! (April 26, 2024)   Leaders, Create Your Events!    Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you. Just leave a comment or send a PM here in the Community!

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

We have closed kudos on this post at this time. Thank you to everyone who kudo'ed their RSVP--your invitations are coming soon!  Miss the window to RSVP? Don't worry--you can catch the recording of the meeting this week in the Community.  Details coming soon!   *****   It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Blogging in the Community is a Great Way to Start

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Topic: Blogging in the Community Are you new to our Communities and feel like you may know a few things to share, but you're not quite ready to start answering questions in the forums? A great place to start is the Community blog! Whether you've been using Power Platform for awhile, or you're new to the low-code revolution, the Community blog is a place for anyone who can write, has some great insight to share, and is willing to commit to posting regularly! In other words, we want YOU to join the Community blog.    Why should you consider becoming a blog author? Here are just a few great reasons. 🎉   Learn from Each Other: Our community is like a bustling marketplace of ideas. By sharing your experiences and insights, you contribute to a dynamic ecosystem where makers learn from one another. Your unique perspective matters! Collaborate and Innovate: Imagine a virtual brainstorming session where minds collide, ideas spark, and solutions emerge. That’s what our community blog offers—a platform for collaboration and innovation. Together, we can build something extraordinary. Showcase the Power of Low-Code: You know that feeling when you discover a hidden gem? By writing about your experience with your favorite Power Platform tool, you’re shining a spotlight on its capabilities and real-world applications. It’s like saying, “Hey world, check out this amazing tool!” Earn Trust and Credibility: When you share valuable information, you become a trusted resource. Your fellow community members rely on your tips, tricks, and know-how. It’s like being the go-to friend who always has the best recommendations. Empower Others: By contributing to our community blog, you empower others to level up their skills. Whether it’s a nifty workaround, a time-saving hack, or an aha moment, your words have impact. So grab your keyboard, brew your favorite beverage, and start writing! Your insights matter and your voice counts! With every blog shared in the Community, we all do a better job of tackling complex challenges with gusto. 🚀 Welcome aboard, future blog author! ✍️💻🌟 Get started blogging across the Power Platform Communities today! Just follow one of the links below to begin your blogging adventure.   Power Apps: https://powerusers.microsoft.com/t5/Power-Apps-Community-Blog/bg-p/PowerAppsBlog Power Automate: https://powerusers.microsoft.com/t5/Power-Automate-Community-Blog/bg-p/MPABlog Copilot Studio: https://powerusers.microsoft.com/t5/Copilot-Studio-Community-Blog/bg-p/PVACommunityBlog Power Pages: https://powerusers.microsoft.com/t5/Power-Pages-Community-Blog/bg-p/mpp_blog   When you follow the link, look for the Message Admins button like this on the page's right rail, and let us know you're interested. We can't wait to connect with you and help you get started. Thanks for being part of our incredible community--and thanks for becoming part of the community blog!

Launch Event Registration: Redefine What's Possible Using AI

  Join Microsoft product leaders and engineers for an in-depth look at the latest features in Microsoft Dynamics 365 and Microsoft Power Platform. Learn how advances in AI and Microsoft Copilot can help you connect teams, processes, and data, and respond to changing business needs with greater agility. We’ll share insights and demonstrate how 2024 release wave 1 updates and advancements will help you:   Streamline business processes, automate repetitive tasks, and unlock creativity using the power of Copilot and role-specific insights and actions. Unify customer data to optimize customer journeys with generative AI and foster collaboration between sales and marketing teams. Strengthen governance with upgraded tools and features. Accelerate low-code development  using natural language and streamlined tools. Plus, you can get answers to your questions during our live Q&A chat! Don't wait--register today by clicking the image below!      

Users online (7,633)