cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
TxH
Advocate IV
Advocate IV

App with Named Formulas crashes in 3.22091.11 and 3.22092.12

I'm able to create Named Formulas in Power Apps Studio, but when I publish the app and try to run it, it crashes with the message "This app stopped working. Try refreshing your browser".

Running the app in the Studio works without problems.

 

There is only one Named Formula defined in this app:

App.Formulas = VERSION = "1.0.100";

Screen1.Label1.Text = VERSION

 

That's it, that's the app.

 

I tested as follows:

  • Preview Environment (WUS)
  • Developer Environment (Europe)
  • Windows 10 and 11
  • Browser
    • Edge
    • Edge InPrivate Mode
  • Power Apps app on Android
  • Power Apps versions
    •   3.22091.11 (recommended)
    •   3.22092.12

 

29 REPLIES 29

@zmorek I tried following in version 3.22091.23 and it worked.

 

Formula =

f_Admin = Lower(User().Email) in [
"email1@email.com",
"email2@email.com"
];

 

Add a label

Label.Text = f_Admin

 

Save publish it. The app loaded fine. Can you please share session Id for app playing session? 

Also if you could send me your msapp (direct message me) which has the issue then that would help with reproing the issue as well.

zmorek
Community Champion
Community Champion

Will do - was in the process of rolling back my version after attempting again. Messaging you shortly.

Anonymous
Not applicable

Same is happening here. PowerApps keeps defaulting me to 3.22091.11, but even saving it under later versions gives me the hanging issue.

JamesSnaps
Kudo Collector
Kudo Collector

I wish I'd read this earlier. I tried updating two of my apps to the latest version and experimenting with a named formula. All seemed good so I published. Now both apps are basically non-functional. Rolling back to a previous version works sometimes. Tried version 3.22092.19 to see if that made a difference but nope, both apps dead on launch.

JAA_
New Member

For me, even disabling Named Formulas didn't get the app working again.

 

I needed to roll back to authoring version 3.22085.14 to get the app working.

 

3.22091.11 seems to be a dodgy version - it doesn't feature in the list of available versions, but if I enabled Named Formulas, it reverted to that version and failed to start.

The fix for named formula issue is not deployed in all regions. But it will be by the end of next week. 

Hi @ShantanuP,

Do I understand correctly that the versions 22091.23 and 22092.19 can be selected under Settings, but may not yet be installed in the tenant?

TxH
Advocate IV
Advocate IV

It was premature of me and a mistake to mark this issue as currently resolved.
It is currently not stable to use versions 22091.23 or 22092.19, as reopening the app in Studio often resets the version to the not quite flowless 22091.11, even though this version obviously no longer exists.

image.png
I currently advise against enabling Named Features in an existing app, as there are reports that it is sometimes not possible to disable the functionality again without problems.
If you absolutely want to test the functionality at this point, you should create a completely new app, which can be deleted again very easily.

- Of course, all this is just my opinion as a user -

 

We have identified the issue where disabling the feature also breaks the app and working on fixing this. Following work around should work in these cases until then.

- Enabled NamedFormula feature

- Add following named formula (You can add additional ones and use them in the app if you want.)

unusedVar = Office365Outlook.GetEmailsV2({from:"nobody@contoso.com"});

- Save and publish the app.

 

 

Not sure this fixes anything for me unfortunately. I've followed your steps and the app still won't open, just sits on the spinning loading icon but never actually loads. Version still showing as 3.22091.11. I did notice a new 3.22094.7 available so tried that, but no difference, except it now stripped the background colour from the app icon and also crashed whenever I try and refresh the component library, so things are going great! 

 

Edit: I tried creating a blank new app and the code did prevent it from crashing. So it's just my existing apps that it hasn't helped.

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Results posted on July 24th

We are excited to announce the Summer of Solutions Challenge!   This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions in the Forums to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersNumber of SolutionsSuper UsersNumber of Solutions @anandm08  23 @WarrenBelz  31 @DBO_DV  10 @Amik  19 AmínAA 6 @mmbr1606  12 @rzuber  4 @happyume  7 @Giraldoj  3@ANB 6 (tie)   @SpongYe  6 (tie)     Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Community MembersSolutionsSuper UsersSolutions @anandm08  10@WarrenBelz 25 @DBO_DV  6@mmbr1606 14 @AmínAA 4 @Amik  12 @royg  3 @ANB  10 @AllanDeCastro  2 @SunilPashikanti  5 @Michaelfp  2 @FLMike  5 @eduardo_izzo  2   Meekou 2   @rzuber  2   @Velegandla  2     @PowerPlatform-P  2   @Micaiah  2     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 3:Community MembersSolutionsSuper UsersSolutionsPower Apps anandm0861WarrenBelz86DBO_DV25Amik66Michaelfp13mmbr160647Giraldoj13FLMike31AmínAA13SpongYe27     Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 4:Community MembersSolutionsSuper UsersSolutionsPower Apps DBO-DV21WarranBelz26Giraldoj7mmbr160618Muzammmil_0695067Amik14samfawzi_acml6FLMike12tzuber6ANB8   SunilPashikanti8

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Top Solution Authors
Users online (3,153)