cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
TxH
Advocate IV
Advocate IV

App with Named Formulas crashes in 3.22091.11 and 3.22092.12

I'm able to create Named Formulas in Power Apps Studio, but when I publish the app and try to run it, it crashes with the message "This app stopped working. Try refreshing your browser".

Running the app in the Studio works without problems.

 

There is only one Named Formula defined in this app:

App.Formulas = VERSION = "1.0.100";

Screen1.Label1.Text = VERSION

 

That's it, that's the app.

 

I tested as follows:

  • Preview Environment (WUS)
  • Developer Environment (Europe)
  • Windows 10 and 11
  • Browser
    • Edge
    • Edge InPrivate Mode
  • Power Apps app on Android
  • Power Apps versions
    •   3.22091.11 (recommended)
    •   3.22092.12

 

29 REPLIES 29
ShantanuP
Power Apps
Power Apps

@zmorek I tried following in version 3.22091.23 and it worked.

 

Formula =

f_Admin = Lower(User().Email) in [
"email1@email.com",
"email2@email.com"
];

 

Add a label

Label.Text = f_Admin

 

Save publish it. The app loaded fine. Can you please share session Id for app playing session? 

Also if you could send me your msapp (direct message me) which has the issue then that would help with reproing the issue as well.

zmorek
Community Champion
Community Champion

Will do - was in the process of rolling back my version after attempting again. Messaging you shortly.

Anonymous
Not applicable

Same is happening here. PowerApps keeps defaulting me to 3.22091.11, but even saving it under later versions gives me the hanging issue.

JamesSnaps
Kudo Collector
Kudo Collector

I wish I'd read this earlier. I tried updating two of my apps to the latest version and experimenting with a named formula. All seemed good so I published. Now both apps are basically non-functional. Rolling back to a previous version works sometimes. Tried version 3.22092.19 to see if that made a difference but nope, both apps dead on launch.

JAA_
New Member

For me, even disabling Named Formulas didn't get the app working again.

 

I needed to roll back to authoring version 3.22085.14 to get the app working.

 

3.22091.11 seems to be a dodgy version - it doesn't feature in the list of available versions, but if I enabled Named Formulas, it reverted to that version and failed to start.

ShantanuP
Power Apps
Power Apps

The fix for named formula issue is not deployed in all regions. But it will be by the end of next week. 

Hi @ShantanuP,

Do I understand correctly that the versions 22091.23 and 22092.19 can be selected under Settings, but may not yet be installed in the tenant?

TxH
Advocate IV
Advocate IV

It was premature of me and a mistake to mark this issue as currently resolved.
It is currently not stable to use versions 22091.23 or 22092.19, as reopening the app in Studio often resets the version to the not quite flowless 22091.11, even though this version obviously no longer exists.

image.png
I currently advise against enabling Named Features in an existing app, as there are reports that it is sometimes not possible to disable the functionality again without problems.
If you absolutely want to test the functionality at this point, you should create a completely new app, which can be deleted again very easily.

- Of course, all this is just my opinion as a user -

 

ShantanuP
Power Apps
Power Apps

We have identified the issue where disabling the feature also breaks the app and working on fixing this. Following work around should work in these cases until then.

- Enabled NamedFormula feature

- Add following named formula (You can add additional ones and use them in the app if you want.)

unusedVar = Office365Outlook.GetEmailsV2({from:"nobody@contoso.com"});

- Save and publish the app.

 

 

Not sure this fixes anything for me unfortunately. I've followed your steps and the app still won't open, just sits on the spinning loading icon but never actually loads. Version still showing as 3.22091.11. I did notice a new 3.22094.7 available so tried that, but no difference, except it now stripped the background colour from the app icon and also crashed whenever I try and refresh the component library, so things are going great! 

 

Edit: I tried creating a blank new app and the code did prevent it from crashing. So it's just my existing apps that it hasn't helped.

Helpful resources

Announcements

Power Platform Connections - Episode 7 | March 30, 2023

Episode Seven of Power Platform Connections sees David Warner and Hugo Bernier talk to Microsoft MVP Dian Taylor, alongside the latest news, product reviews, and community blogs.     Use the hashtag #PowerPlatformConnects on social media for a chance to have your work featured on the show!      Show schedule in this episode:    0:00 Cold Open 00:30 Show Intro 01:02 Dian Taylor Interview 18:03 Blogs & Articles 26:55 Outro & Bloopers    Check out the blogs and articles featured in this week’s episode:    https://francomusso.com/create-a-drag-and-drop-experience-to-upload-case-attachments @crmbizcoach https://www.youtube.com/watch?v=G3522H834Ro​/  @pranavkhuranauk https://github.com/pnp/powerapps-designtoolkit/tree/main/materialdesign%20components @MMe2K​ https://2die4it.com/2023/03/27/populate-a-dynamic-microsoft-word-template-in-power-automate-flow/ @StefanS365 https://d365goddess.com/viva-sales-administrator-settings/ @D365Goddess https://marketplace.visualstudio.com/items?itemName=megel.mme2k-powerapps-helper#Visualize_Dataverse... @MMe2K    Action requested:  Feel free to provide feedback on how we can make our community more inclusive and diverse.    This episode premiered live on our YouTube at 12pm PST on Thursday 30th March 2023.    Video series available at Power Platform Community YouTube channel.    Upcoming events:  Business Applications Launch – April 4th – Free and Virtual! M365 Conference - May 1-5th - Las Vegas Power Apps Developers Summit – May 19-20th - London European Power Platform conference – Jun. 20-22nd - Dublin Microsoft Power Platform Conference – Oct. 3-5th - Las Vegas    Join our Communities:  Power Apps Community Power Automate Community Power Virtual Agents Community Power Pages Community    If you’d like to hear from a specific community member in an upcoming recording and/or have specific questions for the Power Platform Connections team, please let us know. We will do our best to address all your requests or questions.   

Announcing | Super Users - 2023 Season 1

Super Users – 2023 Season 1    We are excited to kick off the Power Users Super User Program for 2023 - Season 1.  The Power Platform Super Users have done an amazing job in keeping the Power Platform communities helpful, accurate and responsive. We would like to send these amazing folks a big THANK YOU for their efforts.      Super User Season 1 | Contributions July 1, 2022 – December 31, 2022  Super User Season 2 | Contributions January 1, 2023 – June 30, 2023    Curious what a Super User is? Super Users are especially active community members who are eager to help others with their community questions. There are 2 Super User seasons in a year, and we monitor the community for new potential Super Users at the end of each season. Super Users are recognized in the community with both a rank name and icon next to their username, and a seasonal badge on their profile.    Power Apps  Power Automate  Power Virtual Agents  Power Pages  Pstork1*  Pstork1*  Pstork1*  OliverRodrigues  BCBuizer  Expiscornovus*  Expiscornovus*  ragavanrajan  AhmedSalih  grantjenkins  renatoromao    Mira_Ghaly*  Mira_Ghaly*      Sundeep_Malik*  Sundeep_Malik*      SudeepGhatakNZ*  SudeepGhatakNZ*      StretchFredrik*  StretchFredrik*      365-Assist*  365-Assist*      cha_cha  ekarim2020      timl  Hardesh15      iAm_ManCat  annajhaveri      SebS  Rhiassuring      LaurensM  abm      TheRobRush  Ankesh_49      WiZey  lbendlin      Nogueira1306  Kaif_Siddique      victorcp  RobElliott      dpoggemann  srduval      SBax  CFernandes      Roverandom  schwibach      Akser  CraigStewart      PowerRanger  MichaelAnnis      subsguts  David_MA      EricRegnier  edgonzales      zmansuri  GeorgiosG      ChrisPiasecki  ryule      AmDev  fchopo      phipps0218  tom_riha      theapurva  takolota     Akash17  momlo     BCLS776  Shuvam-rpa     rampprakash  ScottShearer     Rusk  ChristianAbata     cchannon  Koen5     a33ik   Heartholme     AaronKnox        Matren        Alex_10        Jeff_Thorpe        poweractivate        Ramole        DianaBirkelbach        DavidZoon        AJ_Z        PriyankaGeethik        BrianS        StalinPonnusamy        HamidBee        CNT        Anonymous_Hippo        Anchov        KeithAtherton        alaabitar        Tolu_Victor        KRider        sperry1625        IPC_ahaas      zuurg    rubin_boer   cwebb365   Dorrinda   G1124   Gabibalaban   Manan-Malhotra   jcfDaniel   WarrenBelz   Waegemma      If an * is at the end of a user's name this means they are a Multi Super User, in more than one community. Please note this is not the final list, as we are pending a few acceptances.  Once they are received the list will be updated. 

Microsoft Power Platform Conference | Registration Open | Oct. 3-5 2023

We are so excited to see you for the Microsoft Power Platform Conference in Las Vegas October 3-5 2023! But first, let's take a look back at some fun moments and the best community in tech from MPPC 2022 in Orlando, Florida.   Featuring guest speakers such as Charles Lamanna, Heather Cook, Julie Strauss, Nirav Shah, Ryan Cunningham, Sangya Singh, Stephen Siciliano, Hugo Bernier and many more.   Register today: https://www.powerplatformconf.com/   

Check out the new Power Platform Communities Front Door Experience!

We are excited to share the ‘Power Platform Communities Front Door’ experience with you!   Front Door brings together content from all the Power Platform communities into a single place for our community members, customers and low-code, no-code enthusiasts to learn, share and engage with peers, advocates, community program managers and our product team members. There are a host of features and new capabilities now available on Power Platform Communities Front Door to make content more discoverable for all power product community users which includes ForumsUser GroupsEventsCommunity highlightsCommunity by numbersLinks to all communities Users can see top discussions from across all the Power Platform communities and easily navigate to the latest or trending posts for further interaction. Additionally, they can filter to individual products as well.       Users can filter and browse the user group events from all power platform products with feature parity to existing community user group experience and added filtering capabilities.     Users can now explore user groups on the Power Platform Front Door landing page with capability to view all products in Power Platform.    Explore Power Platform Communities Front Door today. Visit Power Platform Community Front door to easily navigate to the different product communities, view a roll up of user groups, events and forums.

Welcome to the Power Apps Community

Welcome! Congratulations on joining the Microsoft Power Apps community! You are now a part of a vibrant group of peers and industry experts who are here to network, share knowledge, and even have a little fun! Now that you are a member, you can enjoy the following resources:   The Microsoft Power Apps Community Forums If you are looking for support with any part of Microsoft Power Apps, our forums are the place to go. They are titled "Get Help with Microsoft Power Apps " and there you will find thousands of technical professionals with years of experience who are ready and eager to answer your questions. You now have the ability to post, reply and give "kudos" on the Power Apps community forums! Make sure you conduct a quick search before creating a new post because your question may have already been asked and answered!   Microsoft Power Apps IdeasDo you have an idea to improve the Microsoft Power Apps experience, or a feature request for future product updates? Then the "Power Apps Ideas" section is where you can contribute your suggestions and vote for ideas posted by other community members. We constantly look to the most voted Ideas when planning updates, so your suggestions and votes will always make a difference.   Community Blog & NewsOver the years, more than 600 Power Apps Community Blog Articles have been written and published by our thriving community. Our community members have learned some excellent tips and have keen insights on building Power Apps. On the Power Apps Community Blog, read the latest Power Apps related posts from our community blog authors around the world. Let us know if you would like to become an author and contribute your own writing — everything Power Apps related is welcome!   Power Apps Samples, Learning and Videos GalleriesOur galleries have a little bit of everything to do with Power Apps. Our galleries are great for finding inspiration for your next app or component. You can view, comment and kudo the apps and component gallery to see what others have created! Or share Power Apps that you have created with other Power Apps enthusiasts. Along with all of that awesome content, there is the Power Apps Community Video & MBAS gallery where you can watch tutorials and demos by Microsoft staff, partners, and community gurus in our community video gallery.   Again, we are excited to welcome you to the Microsoft Power Apps community family! Whether you are brand new to the world of process automation or you are a seasoned Power Apps veteran. Our goal is to shape the community to be your ‘go to’ for support, networking, education, inspiration and encouragement as we enjoy this adventure together!   Let us know in the Community Feedback if you have any questions or comments about your community experience.To learn more about the community and your account be sure to visit our Community Support Area boards to learn more! We look forward to seeing you in the Power Apps Community!The Power Apps Team

Top Solution Authors
Users online (2,212)