cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Gatwick
Resolver I
Resolver I

Portal contact dates captured without consistent format applied

Dates are getting written to CDS differently but they are entered on the same Contact form with the same format applied. 

The bad dates get rejected on import. The attached shows an example in entry sequence, as show in Excel date formatted column.

10/25/2020 12:00:00 AM           - Rejected

               05/08/1985 00:00        -  Accepted

8/27/1979 12:00:00AM              - Rejected

I have another issue with UK dd/mm/yyyy versus US mm/dd/yyyy formatting as the Environment is configured UK but I can look into that next!.

Also. If a date is keyed in without using the dropdown then everything resolves to 12/31/2019 e.g 2/3/2020, 15/12/2020.

Any hints on where to start to look please? Cheers Richard

 

 

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions

There are three issues here.

Issues 1 & 2 relate to the overall environment setting and the user personalization setting which can override.

 

The 3rd issue is how the problem initially revealed itself. Dataflows from one environment to another failed on valid dd/mm/yyyy formatted dates.

The reason is that DataFlows will only recognise US mm/dd/yyyy formatted dates by design.

 

Microsoft have put it on their road map to fix but no ETA yet!

Cheers, Richard

   

View solution in original post

16 REPLIES 16
v-xida-msft
Community Support
Community Support

HI @Gatwick ,

Could you please share a bit more about your issue?

Do you mean that the date value stored as different format in your Contacts Entity?

Further, do you create a Date time type field or Date only field in your Contact Entity?

 

Regarding the issue that you mentioned, I think this issue may be related to time zone. I have made a test on my side, and don't have the issue that you mentioned.

 

Actually, all date/time data is stored in the Common Data Service as a UTC value. The way the data is displayed determines if just the UTC value is used or if the value gets translated to the user’s local time.

 

If you created a Date only field in your Contacts Entity, but you set it to ‘Time Zone Independent’ or ‘User local’ rather than "Date Only" in your Entity, when storing date value into this Date only field, it would include timestamp will cause the date to appear differently for different users.

 

Please check and see if the following blog would help in your scenario:

https://powerapps.microsoft.com/en-us/blog/working-with-time-zones-in-the-common-data-service/

 

So if you created a Date Only field for your Contacts Entity, please make sure you changed the "Behavior" option to "Date only" for the Date only field in your Contacts Entity:

2.JPG

 

Regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Hi Kris,

 

Thanks for the suggestions. 

 

The 'date only' Contact Birthdate is standard default. Looking again at the Excel export it reveals the field is populated in both date and text format. There is only one form revealed to users for input so I'm puzzled as to how this has happened.

 

Can you shed some light as to how I could check further please? (Next post has Excel picture)

 

Cheers, Richard

This shows the Birthdate field as revealed in Contacts export with column formatting to text. 

Correction. The Birthdate is set as date and time, not just date,  and the picker does not reveal the time.

 

Looking at the contents in both the Date and Text formatted field the time is shown as either 12:00:00 AM or 00:00. No problem.

 

From the documentation I'd checked the individual contacts, both are blank for personal Time Zone settings. 

 

Still puzzled why text and date contents?  

Hi Kris, 

 

I filtered a dataflow for paulmus(text date) and Dan.Gichev(data date) and the text date is rejected, even though it looks fine on the first panel. 

 

I wonder if I can use a function to reformat.

 

Cheers, R

Hi Kris, 

 

It seems that text dates in the field are acceptable on import.

The problem is the DD/MM/YYYY - MM/DD/YYYY formatting.

I missed this originally as all No.119 contact records with text dates were rejected.

They couldn't be converted as all No.119 user entered birthdates were greater than 12 for the DD, when seen as MM = invalid!

So I need to get to the bottom of US UK dates.

 

This Portal site setting is in place but is it correct?

Hi @Gatwick ,

Based on the Date time format site setting you set in your Portal, I think there is something wrong with it. On your side, you should configure a "DateTime/DateTimeFormat" Site Setting in your Portal as below:

1.JPG

The Value field set to following formula:

MM/dd/yyyy HH:mm

 

More details about accepted date/time format in your PowerApps Portal, please check the following article:

https://docs.microsoft.com/en-us/dotnet/standard/base-types/custom-date-and-time-format-strings#mmSp...

 

Date time Site Settings in PowerApps Portal as below:

https://docs.microsoft.com/en-us/powerapps/maker/portals/configure/behavior-format-date-time-field

 

Regards,

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Hi Kris,

 

Many thanks for the screen shot, now in place but dropdown still reveals MM/DD/yyyy and not DD/MM/yyyy.

 

I'll reset another tenant portal and try again.

 

Any ideas on the mixed field formatting, sometimes date number, sometimes text?

 

Cheers, richard

 

Helpful resources

Announcements

Summer of Solutions | Week 2 Results | Win free tickets to the Power Platform Conference

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 1: Community MembersSolutionsSuper UsersSolutionsPower Pages @Inogic  1   @ragavanrajan  2 @aofosu  1 @Jcook  1Open  @OliverRodrigues  1Open  @Lucas001  1Open Open    Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Week 2: Community MembersSolutionsSuper UsersSolutionsPower Pages @taraubianca25  2 @EmadBeshai  2 @ALP2  2Open  @ekluth1  2Open  @mandela  1Open  @Ajlan  1Open   @elishafxx  1    @TA_Jeremy  1    @helio1981  1       Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower PagesInogic4EmadBeshai6Ajlan4ragavanrajan4taraubianca252Fubar4ALP21Jcook3ekluth11OliverRodrigues2  

Copilot Cookbook Challenge | WINNERS ANNOUNCED | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge random winners have been selected for the Challenge.  Thank you to everyone who participated in this challenge.    Copilot Cookbook Gallery:Power Apps Cookbook Gallery: 1. @swaminawale  1. @renatoromao     2. @SpongYe  2.   @nickpotts10  *Please note if for any reason a winner declines, we will have another random drawing.   Check out all of the Cookbook Submissions: 1. Copilot Studio Cookbook Gallery: https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30WINNERS ANNOUNCED - JULY 8th     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge. Early Bird Submissions: @renato Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  n/a2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a   Week 2 Results:  Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Kasun_Pathirana1. ManishSolanki2. cloudatica2. madlad3. n/a3. SpongYe4. n/a4. n/a5. n/a5. n/a     Week 3 Results:  Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Parul_Yadav_Neo1. n/a2. SpongYe2. n/a3. n/a3. n/a4. n/a4. n/a5. n/a5. n/a   Week 4 Results:  Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. @nickpotts10  1. @ShrushtiShah  2. @Suniti_0020 2. @swaminawale 3. n/a3. @farukhis786 4. n/a4. @ManishSolanki  5. n/a5.  n/a

Important Update for Community Platform Access | READ ONLY July 16-22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Tuesday Tip | How to Become a Community Blog Author

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   This Week's Topic: How to Become a Community Blog Author We want YOU to be part of the community blog! Sharing your knowledge of Power Platform is an essential part of our community! Here's why:   It helps create a vibrant and dynamic community of makers who can learn from each other’s experiences and insights.It provides a platform for collaboration and innovation, where members can share their ideas and work together to develop new solutions.It helps promote Power Platform by showcasing its capabilities and real-world applications.It helps build trust and credibility in the community because you are providing valuable information and resources your fellow community members can use to improve their skills and knowledge. By sharing your knowledge of Power Platform in the community blog, you help us create a more engaged and informed community, better equipped to tackle complex challenges. To get started with blogging across the Power Platform communities, please visit the following links:   Power Apps: https://powerusers.microsoft.com/t5/Power-Apps-Community-Blog/bg-p/PowerAppsBlog Power Automate: https://powerusers.microsoft.com/t5/Power-Automate-Community-Blog/bg-p/MPABlog Copilot Studios: https://powerusers.microsoft.com/t5/Power-Virtual-Agents-Community/bg-p/PVACommunityBlogPower Pages: https://powerusers.microsoft.com/t5/Power-Pages-Community-Blog/bg-p/mpp_blog   When you follow the link, look for a button like the one below on the right rail of your community blog, and let us know you're interested. We can't wait to connect with you and help you get started. Thanks for being part of our incredible community--and thanks for becoming part of the community blog!  

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Your Moment to Shine: 2024 PPCC’s Got Power Awards Show

For the third year, we invite you, our talented community members, to participate in the grand 2024 Power Platform Community Conference's Got Power Awards. This event is your opportunity to showcase solutions that make a significant business impact, highlight extensive use of Power Platform products, demonstrate good governance, or tell an inspirational story. Share your success stories, inspire your peers, and show off some hidden talents.  This is your time to shine and bring your creations into the spotlight!  Make your mark, inspire others and leave a lasting impression. Sign up today for a chance to showcase your solution and win the coveted 2024 PPCC’s Got Power Award. This year we have three categories for you to participate in: Technical Solution Demo, Storytelling, and Hidden Talent.        The Technical solution demo category showcases your applications, automated workflows, copilot agentic experiences, web pages, AI capabilities, dashboards, and/or more. We want to see your most impactful Power Platform solutions!  The Storytelling category is where you can share your inspiring story, and the Hidden Talent category is where your talents (such as singing, dancing, jump roping, etc.) can shine! Submission Details:  Fill out the submission form https://aka.ms/PPCCGotPowerSignup by the end of July with details and a 2–5-minute video showcasing your Solution impact. (Please let us know you're coming to PPCC, too!)After review by a panel of Microsoft judges, the top storytellers will be invited to present a virtual demo presentation to the judges during early August. You’ll be notified soon after if you have been selected as a finalist to share your story live at PPCC’s Got Power!  The live show will feature the solution demos and storytelling talents of the top contestants, winner announcements, and the opportunity to network with your community.  It's not just a showcase for technical talent and storytelling showmanship, show it's a golden opportunity to make connections and celebrate our Community together! Let's make this a memorable event! See you there!   Mark your calendars! Date and Time: Thursday, Sept 19th Location: PPCC24 at the MGM Grand, Las Vegas, NV 

Top Kudoed Authors
Users online (2,707)