Showing results for 
Search instead for 
Did you mean: 

Create a table using Excel fields and input it in an email



I am trying to grab specific fields from an Excel, create a table, and then input it in a body of an email.


For more background, I have an excel sheet where if an email address is listed, a notification will be sent out to that user. However, the email address can be listed more than once. I need to send out just ONE email with all of the rows' information with that email address.



So for the example above, an email like below should get sent:





I was able to create this using the web version, but due to some limitations, I have to use the desktop version.


Any help would be appreciated.





Post Prodigy
Post Prodigy

Perhaps use Excel to remove the duplicates in the first instance ?



The duplicates aren't really the issue (I'm able to to that in the automation). Really, what I want is to pull the information from Excel and put it in the body of the email. However, 1 email per 1 email address listed in the Excel with ALL the information it has consolidated. 

Yes but if you have 2 identical email addresses are the row values the same ?

No, the row values are different. 


So it should send ONE email with a table of the different values. Please see the picture below.



Ahh thats where you lost me, initially you said all of the rows value, as in single row but you meant table, gotcha.

Sorry about that. I see how that's confusing. I just updated it as plural

So its the whole table ? no other conditions ?

Like I said excel / power query can remove the duplicate email addresses and put them into a wee table same sheet or other sheet, for each email send table ?

If you have the freedom to sort by email, do so.


Here is the logic after launching excel and sorting:

Get First Free Row

Set %PreviousEmail% to %''%

Loop 2 (assuming a title row) to %FirstFreeRow - 1% increment of 1

    'We will loop through each row with %LoopIndex% as the row number and grab the email from the current row and the next row in two separate variables into %CurrentEmail% and %NextEmail

If %LoopIndex% > 2

    Read from Excel at D and %LoopIndex - 1%


If %CurrentEmail% 'does not equal' %PreviousEmail%

    Capture the current row number as the %StartRow%


If %CurrentEmail% 'does not equal' %NextEmail%

    Send Email with Excel extracted from A and %StartRow% to D and %LoopIndex% NOTE:  LoopIndex is the EndRow

End (if)



If my post has answered your question, please thumbs up and mark this post as a solution.

I also offer paid consulting services at and you can find me on LinkedIn at,
Responsive Resident
Responsive Resident


This is an example PAD code, you can copy and paste in PAD.

This is using sql query processing and outlook desktop for sending email



- Office365 64 bit installed.

- Outlook desktop configured

- Download sample excel file from here 


PAD Code :


# ----------------CHANGE FILE PATH BELOW----------
SET FileExcel TO $'''C:\\Users\\abc\\Downloads\\Book1.xlsx'''
SET tableStart TO $'''<div><table border=\"1\" cellpadding=\"2\">'''
SET tablehead TO $'''<tr><th>Number</th><th>Name</th><th>Amount</th><th>Issues</th><th>Need to send email</th><th>Email Address</th></tr>'''
Outlook.Launch Instance=> OutlookInstance
SET ConnString TO $'''Provider=Microsoft.ACE.OLEDB.12.0;Data Source=%FileExcel%;Extended Properties=\"Excel 12.0 Xml;HDR=yes\";'''
Database.ExecuteSqlStatement.ConnectAndExecute ConnectionString: ConnString Statement: $'''Select DISTINCT [Email Address]
from [Sheet1$]
''' Timeout: 30 Result=> QR_Email
    SET tableBody TO $'''%''%'''
    SET EmailAddress TO CI_Email['Email Address']
    Database.ExecuteSqlStatement.ConnectAndExecute ConnectionString: ConnString Statement: $'''Select *
from [Sheet1$]
where [Email Address] = \'%EmailAddress%\'
''' Timeout: 30 Result=> QR_Data
        SET tableBody TO $'''%tableBody%<tr><td>%CI_Data['Number']%</td><td>%CI_Data['Amount']%</td><td>%CI_Data['Name']%</td><td>%CI_Data['Issues']%</td><td>%CI_Data['Need to send email']%</td><td>%CI_Data['Email Address']%</td></tr>'''
    SET tableEnd TO $'''</table></div>'''
    Outlook.SendEmailThroughOutlook.SendEmail Instance: OutlookInstance Account: $'''''' SendTo: $'''''' Subject: $'''test''' Body: $'''%tableStart%
%tableEnd%''' IsBodyHtml: True




I'm not understanding where you're getting the "Set %PreviousEmail% to %''%" 


Is %PreviousEmail% the %EmailAddress%



My apologies.  I added another step (in BOLD) below.  You are working off of two major logics.


Logic 1)  If the Current Row Email is not the same as the Previous Row Email, get the Starting Row #

Logic 2)  If the Next Row Email is not the same as the Current Row Email, send the Email (from Start Row to Current Row)


Set %PreviousEmail% to %''% is simply there so that the variable is defined as (blank) before the IF logic that happens later.  This means your first row's email will not equal blank; therefore, it will declare the start row as 2 for the first email.  Without this line of code, the IF function would error out because %PreviousEmail% would not have been populated yet.


Best of luck!

If my post has answered your question, please thumbs up and mark this post as a solution.

I also offer paid consulting services at and you can find me on LinkedIn at,

Hi MichaelAnnis,


Thanks for your response! Are you also able to explain the first loop and how you're splitting between

 %CurrentEmail% and %NextEmail?



Current Email would be:


Read from Excel at D and %LoopIndex% to %CurrentEmail%


Next Email would be:


Read from Excel at D and %LoopIndex + 1% to %NextEmail%

If my post has answered your question, please thumbs up and mark this post as a solution.

I also offer paid consulting services at and you can find me on LinkedIn at,

Helpful resources


Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Results posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (3,799)