cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
AlanYC
Frequent Visitor

How to include the logical AND/OR operators in conditionals

I would like to know how to include the logical AND/OR operators in conditionals, previously on WinAutomation this could be achieved like this:

 

The AND "&&" operator can be used inside an "If" condition using the following format

 

First Operand: %TextVar_1 == "ABC" && TextVar_2 == "DEF"%

Operator: =

Second Operand: True

 

The OR "||" operator can be used in a similar way

 

First Operand: %TextVar_1 == "ABC" || TextVar_2 == "DEF"%

Operator: =

Second Operand: True

 

I have tried to express it in this way in Power Automate Desktop and it is not working.

 

In my case I am reading a single cell value from excel which is stored into the variable %ExcelData%, I would like to use an If conditional to review if the variable's value is either "Payer" or "Doc" I need it to do certain actions, but if it is blank I need it to go into a different set of actions.

 

I have already tried to express it in different ways but I haven't been able to achieve this logic, this is what I have tried so far:

 

First Operand: %ExcelData = "Payer" || ExcelData = "Doc"%

Operator: =

Second Operand: True

 

With the above conditional I get an Invalid Value message, you might have noticed I removed the double equal signs, I have tried with the double equal signs and it also says invalid value in this way.

 

First Operand: %ExcelData = 'payer'% || %ExcelData = 'doc'%

Operator: =

Second Operand: True

 

The above conditional is accepted by PAD but when I run it it doesn't seem to be working as intended as it is not realizing that the cell value is actually Payer.

 

 

 

 

 

 

 

 

26 REPLIES 26
adijain
Employee
Employee

Hello @AlanYC ,

 

Thank you for bringing this issue to us. We will investigate this further on our end and get back to you with the correct syntax for using AND/OR operators. For now, could you please instead use the workaround of using two if conditions to verify the ExcelData var for both 'Payer' and 'Doc' separately. 

 

Thanks for trying out Power Automate Desktop!

Thank you, I will wait for your reply. I am currently using the workaround that you mentioned of creating two separate conditionals.

adijain
Employee
Employee

Hi @AlanYC,

 

Please find the syntax for the logical AND/OR operators in PAD conditionals below:

  • AND instead of && 
  • OR instead of ||
  • = instead of ==

Example:

temp.JPG

 

Please let us know if you have any further questions.

 

Thanks,

Aditya

Good afternoon @adijain , I'm Efrain from Panama. 

 

I'm Developer, but at the same I'm new in Power Automate. And I need to know the next info:

I was trying use this logic but I have question. Can I use the second operand as result? This question is because I need to do a comparison of two variables, but I need the result as TRUE or FALSE value.

 

I'm testing new apps to my company, and one these apps POD. 

 

Regards.

miketran13
Impactful Individual
Impactful Individual

Thanks a lot for this Adijain, it was thing I am looking for. It helps a lot and can reduce the complexity of my process.

 

Regards,

Mike

Use a Set variable to write the result of a boolean expression into something to use later.

HI @efrainC_Onq, thanks for the question, you would need to set the first operand as a variable, like what @Henrik_M  suggested and then that variable will have the result as True or False - as shown below:

adijain_0-1611747090334.png

In above, the %NewVar% will have either True or False value.  Hope it makes sense. 

vtse
Frequent Visitor

Hi,

try the following

 

set the two values payer and doc as variables var1 and var2

then use the if action as following 

First operand    %ExcelData== var1 || ExcelData== var2%

operator equals (=)

second operator TRUE

TomaszPoszytek
Most Valuable Professional
Most Valuable Professional

Hi,

 

this should be:

 

First Operand: %ExcelData = 'payer'% || %ExcelData = 'doc'%

Operator: =

Second Operand: %True%

ericcho
New Member

To expand on this topic....what is the proper notation for operators that are not straight up equals?

For example I want to quality something that contains "payer" or startswith "doc"

....something along the lines of:

 

%contains(ExcelData,'payer') OR startswith(ExcelData,'doc')%

 

Thanks in advance

Anonymous
Not applicable

Hello @ericcho 

 

We can use conditional functions such like Contains() or StartsWith() in [First operand] of If action.

 

For example:

%Contains(VAR, 'KEY', False) OR StartsWith(VAR, 'KEY', False)%

 

* The 3rd argument of each function means "Ignore case = False" thus "Case sensitive".

 

 

shindomo_0-1635588263115.png

 

shindomo_1-1635588272313.png

 

[List of available 8 functions]

  • Contains(VAR, 'KEY', False)
  • NotContains(VAR, 'KEY', False)
  • IsEmpty(VAR)
  • IsNotEmpty(VAR)
  • StartsWith(VAR, 'KEY', False)
  • NotStartsWith(VAR, 'KEY', False)
  • EndsWith(VAR, 'KEY', False)
  • NotEndsWith(VAR, 'KEY', False)

 

Thank you.

This is great!! How did you find out? 🤔

Anonymous
Not applicable

Hello @Henrik_M 

Thanks for your resonse.

Here is how did I find it out. 🙂

 

1) I have set up 8 different conditions for each of the empty IF actions.

 

shindomo_0-1635766448282.png

 

For example (Operator = "Contains"):

shindomo_1-1635766606568.png

 

2) Copy & Paste the code from Flow Designer to Notepad.

 

SET VAR TO $'''ABC'''
IF Contains(VAR, $'''KEY''', False) THEN
END
IF NotContains(VAR, $'''KEY''', False) THEN
END
IF IsEmpty(VAR) THEN
END
IF IsNotEmpty(VAR) THEN
END
IF StartsWith(VAR, $'''KEY''', False) THEN
END
IF NotStartsWith(VAR, $'''KEY''', False) THEN
END
IF EndsWith(VAR, $'''KEY''', False) THEN
END
IF NotEndsWith(VAR, $'''KEY''', False) THEN
END

 

3) I guessed that these conditional functions in Robin language could be used in the first operand of the IF action... Bingo!

businesstaken
Frequent Visitor

thanks a lot, very useful

StanAtFlumerics
Frequent Visitor

If somebody has issues with power automate desktop's if conditions and Boolean comparisons / values:

I had to enclose the True/False value in % characters, like variables:

 

First Operand: %SomeVariable%

Operator: =

Second Operand: %True%

Hi,

 

Thanks for this trick. What if we need to check a web page contains 2 text. Let us say we will use "If web page contains" action

 

Here I want to check If web page does not contains a text with OR operator, I have tried many ways but no luck. Below one doesn't work or doesn't properly check the conditions  

 

Marutha_K_0-1664437229721.png

 

or & and statements only work inside %'s, you're just literally searching for "ALL SALES ARE FINAL OR limited availability" the OR does not separate anything on its own as that would be weird. Also OR & AND only support boolean values, so this wouldn't work anyway, instead I recommend just using an "Else If" in your IF statement as that's the closest you can get to an OR.

momlo
Super User
Super User

You could also grab the source code of the page, then parse with regex, then use IF to see if your variable returned by regex it empty or not.

 

IF (NotContains(Browser, 'All Sales Are Final', True) OR NotContains(Browser, 'Limited Availability', True)) = $'''True''' THEN

 

Which looks like this:

JasonWS_0-1665063806931.png

 

If I wanted to run actions when the webpage contains neither of those phrases, I would use an AND operator instead.

Helpful resources

Announcements

Update! June 13th, Community Ambassador Call for User Group Leaders and Super Users

Calling all Super Users & User Group Leaders   UPDATE:  We just wrapped up June's Community Ambassador monthly calls for Super Users and User Group Leaders. We had a fantastic call with lots of engagement. We are excited to share some highlights with you!    Big THANK YOU to our special guest Thomas Verhasselt, from the Copilot Studio Product Team for sharing how to use Power Platform Templates to achieve next generation growth.     A few key takeaways: Copilot Studio Cookbook Challenge:  Week 1 results are posted, Keep up the great work!Summer of Solutions:  Starting on Monday, June 17th. Just by providing solutions in the community, you can be entered to win tickets to Power Platform Community Conference.Super User Season 2: Coming SoonAll communities moving to the new platform end of July We also honored two different community members during the call, Mohamed Amine Mahmoudi and Markus Franz! We are thankful for both leaders' contributions and engagement with their respective communities. 🎉   Be sure to mark your calendars and register for the meeting on July 11th and stay up to date on all of the changes that are coming. Check out the Super User Forum boards for details.   We're excited to connect with you and continue building a stronger community together.   See you at the call!

Copilot Cookbook Challenge | Week 2 Results | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge is a great way to showcase your creativity and connect with others. Plus, you could win tickets to the Power Platform Community Conference in Las Vegas in September 2024 as an amazing bonus.   Two ways to enter: 1. Copilot Studio Cookbook Gallery:  https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge.   Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  @Dhanush 2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a   Week 2 Results:  Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Kasun_Pathirana1. ManishSolanki2. cloudatica2. madlad3. n/a3. SpongYe4. n/a4. n/a5. n/a5. n/a

Win free tickets to the Power Platform Conference | Summer of Solutions

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**

Celebrating the June Super User of the Month: Markus Franz

Markus Franz is a phenomenal contributor to the Power Apps Community. Super Users like Markus inspire others through their example, encouragement, and active participation.    The Why: "I do this to help others achieve what they are trying to do. As a total beginner back then without IT background I know how overwhelming things can be, so I decided to jump in and help others. I also do this to keep progressing and learning myself." Thank you, Markus Franz, for your outstanding work! Keep inspiring others and making a difference in the community! 🎉  Keep up the fantastic work! 👏👏 Markus Franz | LinkedIn  Power Apps: mmbr1606  

Your Moment to Shine: 2024 PPCC’s Got Power Awards Show

For the third year, we invite you, our talented community members, to participate in the grand 2024 Power Platform Community Conference's Got Power Awards. This event is your opportunity to showcase solutions that make a significant business impact, highlight extensive use of Power Platform products, demonstrate good governance, or tell an inspirational story. Share your success stories, inspire your peers, and show off some hidden talents.  This is your time to shine and bring your creations into the spotlight!  Make your mark, inspire others and leave a lasting impression. Sign up today for a chance to showcase your solution and win the coveted 2024 PPCC’s Got Power Award. This year we have three categories for you to participate in: Technical Solution Demo, Storytelling, and Hidden Talent.      The Technical solution demo category showcases your applications, automated workflows, copilot agentic experiences, web pages, AI capabilities, dashboards, and/or more. We want to see your most impactful Power Platform solutions!  The Storytelling category is where you can share your inspiring story, and the Hidden Talent category is where your talents (such as singing, dancing, jump roping, etc.) can shine! Submission Details:  Fill out the submission form https://aka.ms/PPCCGotPowerSignup by July 12th with details and a 2–5-minute video showcasing your Solution impact. (Please let us know you're coming to PPCC, too!)After review by a panel of Microsoft judges, the top storytellers will be invited to present a virtual demo presentation to the judges during early August. You’ll be notified soon after if you have been selected as a finalist to share your story live at PPCC’s Got Power!  The live show will feature the solution demos and storytelling talents of the top contestants, winner announcements, and the opportunity to network with your community.  It's not just a showcase for technical talent and storytelling showmanship, show it's a golden opportunity to make connections and celebrate our Community together! Let's make this a memorable event! See you there!   Mark your calendars! Date and Time: Thursday, Sept 19th Location: PPCC24 at the MGM Grand, Las Vegas, NV 

Tuesday Tip | Accepting Solutions

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   To enhance our collaborative environment, it's important to acknowledge when your question has been answered satisfactorily. Here's a quick guide on how to accept a solution to your questions: Find the Helpful Reply: Navigate to the reply that has effectively answered your question.Accept as Solution: Look for the "Accept as Solution" button or link, usually located at the bottom of the reply.Confirm Your Selection: Clicking this button may prompt you for confirmation. Go ahead and confirm that this is indeed the solution.Acknowledgment: Once accepted, the reply will be highlighted, and the original post will be marked as "Solved". This helps other community members find the same solution quickly. By marking a reply as an accepted solution, you not only thank the person who helped you but also make it easier for others with similar questions to find answers. Let's continue to support each other by recognizing helpful contributions. 

Users online (3,525)