Showing results for 
Search instead for 
Did you mean: 
Frequent Visitor

How to include the logical AND/OR operators in conditionals

I would like to know how to include the logical AND/OR operators in conditionals, previously on WinAutomation this could be achieved like this:


The AND "&&" operator can be used inside an "If" condition using the following format


First Operand: %TextVar_1 == "ABC" && TextVar_2 == "DEF"%

Operator: =

Second Operand: True


The OR "||" operator can be used in a similar way


First Operand: %TextVar_1 == "ABC" || TextVar_2 == "DEF"%

Operator: =

Second Operand: True


I have tried to express it in this way in Power Automate Desktop and it is not working.


In my case I am reading a single cell value from excel which is stored into the variable %ExcelData%, I would like to use an If conditional to review if the variable's value is either "Payer" or "Doc" I need it to do certain actions, but if it is blank I need it to go into a different set of actions.


I have already tried to express it in different ways but I haven't been able to achieve this logic, this is what I have tried so far:


First Operand: %ExcelData = "Payer" || ExcelData = "Doc"%

Operator: =

Second Operand: True


With the above conditional I get an Invalid Value message, you might have noticed I removed the double equal signs, I have tried with the double equal signs and it also says invalid value in this way.


First Operand: %ExcelData = 'payer'% || %ExcelData = 'doc'%

Operator: =

Second Operand: True


The above conditional is accepted by PAD but when I run it it doesn't seem to be working as intended as it is not realizing that the cell value is actually Payer.










Hello @AlanYC ,


Thank you for bringing this issue to us. We will investigate this further on our end and get back to you with the correct syntax for using AND/OR operators. For now, could you please instead use the workaround of using two if conditions to verify the ExcelData var for both 'Payer' and 'Doc' separately. 


Thanks for trying out Power Automate Desktop!

Thank you, I will wait for your reply. I am currently using the workaround that you mentioned of creating two separate conditionals.

Hi @AlanYC,


Please find the syntax for the logical AND/OR operators in PAD conditionals below:

  • AND instead of && 
  • OR instead of ||
  • = instead of ==




Please let us know if you have any further questions.




Not applicable

Good afternoon @adijain , I'm Efrain from Panama. 


I'm Developer, but at the same I'm new in Power Automate. And I need to know the next info:

I was trying use this logic but I have question. Can I use the second operand as result? This question is because I need to do a comparison of two variables, but I need the result as TRUE or FALSE value.


I'm testing new apps to my company, and one these apps POD. 



Thanks a lot for this Adijain, it was thing I am looking for. It helps a lot and can reduce the complexity of my process.




Use a Set variable to write the result of a boolean expression into something to use later.

HI @Anonymous, thanks for the question, you would need to set the first operand as a variable, like what @Henrik_M  suggested and then that variable will have the result as True or False - as shown below:


In above, the %NewVar% will have either True or False value.  Hope it makes sense. 

Frequent Visitor


try the following


set the two values payer and doc as variables var1 and var2

then use the if action as following 

First operand    %ExcelData== var1 || ExcelData== var2%

operator equals (=)

second operator TRUE

Most Valuable Professional
Most Valuable Professional



this should be:


First Operand: %ExcelData = 'payer'% || %ExcelData = 'doc'%

Operator: =

Second Operand: %True%

New Member

To expand on this topic....what is the proper notation for operators that are not straight up equals?

For example I want to quality something that contains "payer" or startswith "doc"

....something along the lines of:


%contains(ExcelData,'payer') OR startswith(ExcelData,'doc')%


Thanks in advance

Not applicable

Hello @ericcho 


We can use conditional functions such like Contains() or StartsWith() in [First operand] of If action.


For example:

%Contains(VAR, 'KEY', False) OR StartsWith(VAR, 'KEY', False)%


* The 3rd argument of each function means "Ignore case = False" thus "Case sensitive".







[List of available 8 functions]

  • Contains(VAR, 'KEY', False)
  • NotContains(VAR, 'KEY', False)
  • IsEmpty(VAR)
  • IsNotEmpty(VAR)
  • StartsWith(VAR, 'KEY', False)
  • NotStartsWith(VAR, 'KEY', False)
  • EndsWith(VAR, 'KEY', False)
  • NotEndsWith(VAR, 'KEY', False)


Thank you.

This is great!! How did you find out? 🤔

Not applicable

Hello @Henrik_M 

Thanks for your resonse.

Here is how did I find it out. 🙂


1) I have set up 8 different conditions for each of the empty IF actions.




For example (Operator = "Contains"):



2) Copy & Paste the code from Flow Designer to Notepad.


IF Contains(VAR, $'''KEY''', False) THEN
IF NotContains(VAR, $'''KEY''', False) THEN
IF StartsWith(VAR, $'''KEY''', False) THEN
IF NotStartsWith(VAR, $'''KEY''', False) THEN
IF EndsWith(VAR, $'''KEY''', False) THEN
IF NotEndsWith(VAR, $'''KEY''', False) THEN


3) I guessed that these conditional functions in Robin language could be used in the first operand of the IF action... Bingo!

Frequent Visitor

thanks a lot, very useful

Frequent Visitor

If somebody has issues with power automate desktop's if conditions and Boolean comparisons / values:

I had to enclose the True/False value in % characters, like variables:


First Operand: %SomeVariable%

Operator: =

Second Operand: %True%



Thanks for this trick. What if we need to check a web page contains 2 text. Let us say we will use "If web page contains" action


Here I want to check If web page does not contains a text with OR operator, I have tried many ways but no luck. Below one doesn't work or doesn't properly check the conditions  




or & and statements only work inside %'s, you're just literally searching for "ALL SALES ARE FINAL OR limited availability" the OR does not separate anything on its own as that would be weird. Also OR & AND only support boolean values, so this wouldn't work anyway, instead I recommend just using an "Else If" in your IF statement as that's the closest you can get to an OR.

Super User
Super User

You could also grab the source code of the page, then parse with regex, then use IF to see if your variable returned by regex it empty or not.


IF (NotContains(Browser, 'All Sales Are Final', True) OR NotContains(Browser, 'Limited Availability', True)) = $'''True''' THEN


Which looks like this:



If I wanted to run actions when the webpage contains neither of those phrases, I would use an AND operator instead.

Helpful resources


Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (2,145)