cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
BLawless
Frequent Visitor

On Error Block not triggering and catching error, resulting in flow failing

Hey guys, y'all were pretty helpful with a deeper concept I was trying to wrap my head around, so it's time for a softball (because I'm pretty sure the issue is located between the keyboard and the computer chair).

I've been trying to implement "On Block Error" blocks that will catch any errors thrown by the actions they are encapsulating and handle them so the main flow doesn't fail. Every attempt at this however has failed to catch any errors thrown by the actions the block encapsulates, this is both when I just have actions as well as when I have calls to sub flows that are contained within an "On block error" action. 

To help visualize my issue (see pictures below) I created a very basic "example" flow that creates an array of a certain length and, inside of an "On block error" action, it will attempt to assign a a value to an index that is out of bounds for the array (and should therefore throw an IndexOutOfBoundsException upon attempting that action).

I have not set individual error handling actions (namely because "Set varaible" does not have any "on error" properties), but this is applicable to actions that also have individual error handling properties. Every time the flow attempts the action it will cause the whole flow to fail with a runtime error of the index being invalid. The "On Block Error" is not set to throw an error in response to catching one, so the error causing the flow to fail (from my observations) is the one thrown by the action inside of the "On block error" block. It is worth noting that I in the example I am calling this sub-flow from the Main flow, which has the sub-flow call encapsulated in another "On block error" action, which means two different "On block error" actions have failed to catch and handle this error.

I have tried setting it to "Continue flow run" and either "go to the end of block", "run sub-flow", "go to beginning of block", etc. None of these actions take place, it simply behaves as if it didn't catch the error and the error made its way unhandled to the main flow runtime level and caused the flow to fail. 

I'm hoping this is just a simple configuration issue but if there are limitations to the "On block error" action that I am not aware of then I will happily expand on other scenarios where I am implementing this action (because none of my attempts with "On block error" have been successful thus far). 
Error thrown from the previous run at the bottom reports that the flow was stopped because of the action performedError thrown from the previous run at the bottom reports that the flow was stopped because of the action performed"On Error Block" configuration"On Error Block" configuration


2 ACCEPTED SOLUTIONS

Accepted Solutions
yoko2020
Responsive Resident
Responsive Resident

@BLawless 

I agree with your statement, applying individual exception in every action is ridiculous approach if we have complex flow.

 

But this is the reality, there are some action/error which did not get captured by On Block error. It still does not work as we expected same as like we apply Try Catch Exception in C#/Vb.Net.

View solution in original post

Rkv_
Resolver II
Resolver II

Hello Everyone, 

The Onblock error can only able to capture the failures happened with the actions which contain on error property and the errors listed with in the advanced tab of the on error.

 

For example the below action Get window contains On error.

 

Rkv__1-1630316620306.png    

Rkv__2-1630316661006.png

So the Onblock error able to capture if this action failed to get window.

The below action is the IF condition, which don't have on error, and this cannot be captured in Onblock error.

Rkv__3-1630316786825.png

 

 

 



View solution in original post

8 REPLIES 8
Henrik_M
Super User
Super User

Power Automate Desktop cannot handle IndexOutOfBounds exceptions 👎

 

If you are not 100% sure that the index will be valid during execution, you will have to do a manual check (using %List.Count%) instead of relying on the block error...

If the "On Block Error" doesn't catch errors like IndexOutOfBounds Exceptions then what errors are they capable of catching? Is there a reference list somewhere? 

 

I do agree with you that there are means to verify whether or not something should cause an error before performing the action (and make the actions performance conditional to that verification), but with complex flows there's a lot of edge cases that would be better off handled by a simple "On Block Error" segment. In my experience, individually checking all these cases for an error triggers would severely impact the readability and debug performance of the flow. 

yoko2020
Responsive Resident
Responsive Resident

@BLawless 

I agree with your statement, applying individual exception in every action is ridiculous approach if we have complex flow.

 

But this is the reality, there are some action/error which did not get captured by On Block error. It still does not work as we expected same as like we apply Try Catch Exception in C#/Vb.Net.


@yoko2020 wrote:

But this is the reality, there are some action/error which did not get captured by On Block error. It still does not work as we expected same as like we apply Try Catch Exception in C#/Vb.Net.




Marking this as the solution since it touches directly on the general issue, which is that the "On Block Error" doesn't capture every exception the same way a Try-Catch block does in other contexts.

From what I've gathered here it seems that the only errors that the "On Block Error" catches are those listed under the "advanced" segment of the actions "on error" actions. If this is true then actions such as assigning variables are capable of throwing errors that the "On Block Error" cannot handle. This is unverified but makes the most sense based on the discussion here and my observations. 

yoko2020
Responsive Resident
Responsive Resident

Here is just sample, and there are many more i can not remember.

This error did not catch by the On Block error.

 

That means if you have internal subflow function for handling global exception, it will not be executed.

(EX: if %GeneralException% = 1 then take a screenshot of desktop and send it via email )

 

Spoiler
2021-08-29_084245.png
Rkv_
Resolver II
Resolver II

Hello Everyone, 

The Onblock error can only able to capture the failures happened with the actions which contain on error property and the errors listed with in the advanced tab of the on error.

 

For example the below action Get window contains On error.

 

Rkv__1-1630316620306.png    

Rkv__2-1630316661006.png

So the Onblock error able to capture if this action failed to get window.

The below action is the IF condition, which don't have on error, and this cannot be captured in Onblock error.

Rkv__3-1630316786825.png

 

 

 



BLawless
Frequent Visitor


@Rkv_ wrote:

Hello Everyone, 

The Onblock error can only able to capture the failures happened with the actions which contain on error property and the errors listed with in the advanced tab of the on error.




Thank you @Rkv_  for confirming my theory posted in my last comment (here). Going to update the post to represent your comment as the solution as it points out the core issue. 

The previously marked solution by @yoko2020 is still input valuable as it touches on the core of how PAD under the hood isn't a programming/scripting language but features script-like operations to allow non-programmers to use the automation without having to learn a full programming language and has some limitations as a result (which we may be able to mitigate, see followup further down). 


@yoko2020 wrote:

But this is the reality, there are some action/error which did not get captured by On Block error. It still does not work as we expected same as like we apply Try Catch Exception in C#/Vb.Net.



Furthermore thank you for your example contribution (found here). 

 


As a followup:

I think there is a workaround but it may take some time to verify.

It might be possible (in cases where doing checks for validation on all edge cases is impossible with other actions) to perform the analog equivalent of the PAD action inside of a "Run JavaScript" action and use a try-catch block there (the one under "System", not "Run JavaScript on webpage unless you're using a browser to perform actions on a page). Knowing how variables work between the translation layer of a "Run JavaScript" action and the variable assignment in the flow, this will not work for every scenario, but I think a combination of this and using validation checks using other actions in PAD will cover most (if not all) of advanced edge cases. 

If JavaScript isn't your thing, "Run Python script", "Run VBScript", "Run PowerShell script", and any other "Run [Insert Programming Language here] Script" that Microsoft implements into PAD in the future (C#?) are good alternatives. 

I know for non-programmers this may not be ideal, but if you're running into scenarios where you need the full function of a try-catch block, chances are you're at the level to learn enough about one of these languages to do a try-catch block and scripting analog of whatever action you're wanting to perform in PAD. 

Anonymous
Not applicable

💩This is pain in butt. Try-Catch construction that cannot be trusted is a nightmare. It makes it really difficult to explain to customers why the robot terminated without sending any email warning as it should by the process design...  💩

Helpful resources

Announcements

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip: Getting Started with Private Messages & Macros

Welcome to TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   This Week's Tip: Private Messaging & Macros in Power Apps Community   Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member!   Our Knowledge Base article about private messaging and macros is the best place to find out more. Check it out today and discover some key tips and tricks when it comes to messages and macros:   Private Messaging: Learn how to enable private messages in your community profile and ensure you’re connected with other community membersMacros Explained: Discover the convenience of macros—prewritten text snippets that save time when posting in forums or sending private messagesCreating Macros: Follow simple steps to create your own macros for efficient communication within the Power Apps CommunityUsage Guide: Understand how to apply macros in posts and private messages, enhancing your interaction with the Community For detailed instructions and more information, visit the full page in your community today:Power Apps: Enabling Private Messaging & How to Use Macros (Power Apps)Power Automate: Enabling Private Messaging & How to Use Macros (Power Automate)  Copilot Studio: Enabling Private Messaging &How to Use Macros (Copilot Studio) Power Pages: Enabling Private Messaging & How to Use Macros (Power Pages)

Tuesday Tip: Subscriptions & Notifications

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week: All About Subscriptions & Notifications We don't want you to a miss a thing in the Community! The best way to make sure you know what's going on in the News & Announcements, to blogs you follow, or forums and galleries you're interested in is to subscribe! These subscriptions ensure you receive automated messages about the most recent posts and replies. Even better, there are multiple ways you can subscribe to content and boards in the community! (Please note: if you have created an AAD (Azure Active Directory) account you won't be able to receive e-mail notifications.)   Subscribing to a Category  When you're looking at the entire category, select from the Options drop down and choose Subscribe.     You can then choose to Subscribe to all of the boards or select only the boards you want to receive notifications. When you're satisfied with your choices, click Save.     Subscribing to a Topic You can also subscribe to a single topic by clicking Subscribe from the Options drop down menu, while you are viewing the topic or in the General board overview, respectively.     Subscribing to a Label Find the labels at the bottom left of a post.From a particular post with a label, click on the label to filter by that label. This opens a window containing a list of posts with the label you have selected. Click Subscribe.     Note: You can only subscribe to a label at the board level. If you subscribe to a label named 'Copilot' at board #1, it will not automatically subscribe you to an identically named label at board #2. You will have to subscribe twice, once at each board.   Bookmarks Just like you can subscribe to topics and categories, you can also bookmark topics and boards from the same menus! Simply go to the Topic Options drop down menu to bookmark a topic or the Options drop down to bookmark a board. The difference between subscribing and bookmarking is that subscriptions provide you with notifications, whereas bookmarks provide you a static way of easily accessing your favorite boards from the My subscriptions area.   Managing & Viewing Your Subscriptions & Bookmarks To manage your subscriptions, click on your avatar and select My subscriptions from the drop-down menu.     From the Subscriptions & Notifications tab, you can manage your subscriptions, including your e-mail subscription options, your bookmarks, your notification settings, and your email notification format.     You can see a list of all your subscriptions and bookmarks and choose which ones to delete, either individually or in bulk, by checking multiple boxes.     A Note on Following Friends on Mobile Adding someone as a friend or selecting Follow in the mobile view does not allow you to subscribe to their activity feed. You will merely be able to see your friends’ biography, other personal information, or online status, and send messages more quickly by choosing who to send the message to from a list, as opposed to having to search by username.

Users online (4,422)