cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Jspeer1
Helper II
Helper II

Run Desktop Flow as Admin? (third attempt)

This is my third post on this topic and no answer to this day.

 

I have built a flow out at least 7 different ways and it will not work.

 

I am a domain user on a domain PC.

I have local administrator rights.

Powershell ISE is set to open as an admin.

UAC is disabled.

Power Automate Desktop app is set to open as admin.

 

All I need is to have the ability to run a script that will add a domain user to a remote computer's local admin group.

I have 4 lines of PowerShell that get that done but there is no way to do it as Flow runs Powershell as a mortal user.

I have tried the following workarounds:

 

1. Launch Powershell ISE and copy paste the code using the Flow Desktop App. Fails since now ISE is running as admin.

2. Luanch a cmd session that calls on my PS1 script as admin. Can't do it.

3. Launch a bat file that calls my PS1 script as admin. Can't interact with the UI now because again, it's running as an admin.

4. Manually map the mouse to launch the PS1 script shortcut as admin. Same thing.

 

I need 4 lines of code executed. I can execute the code perfectly fine but Flow won't do it for me?

 

PS: I have to run this code a couple hundred times and the rest of my Flow itself automates the receiving the requests, parsing out asset tags and usernames and storing all that into variables so even though it simple I've literally automated it all.

1 ACCEPTED SOLUTION

Accepted Solutions
miketran13
Impactful Individual
Impactful Individual

Hi, 

I got your problems. This is what I have not tried yet but please try if you think it is possible.

 

Since you can't interact with the PowerShell script run as administrator, so you should try another way. First, you can write your params to a CSV / Text / Xml file in PAD. Then from your PowerShell script you will need to read the params from this file. When you finished with your PowerShell steps, you should write a status to a new file. Then from your PAD step, you can wait for that file is created and to finish your steps in PAD.

Untitled.png

Untitled1.png

 

That was my thoughts. I'm not sure it is applicable for you or not. But it worth a try I think 🙂 

 

Thanks and hope it can help you. 

Mike

---------------------------------

Did I answer your question? Please consider to Mark my post as a solution! to guide others

View solution in original post

10 REPLIES 10
miketran13
Impactful Individual
Impactful Individual

Hi there,

 

It's a tricky thing. Have you tried this yet? Ensure the PowerShell script itself can run as administrator. 

 

You can add this at the beginning of your powershell script. 

 

 

if (!([Security.Principal.WindowsPrincipal][Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole] "Administrator")) { Start-Process powershell.exe "-NoProfile -ExecutionPolicy Bypass -File `"$PSCommandPath`"" -Verb RunAs; exit }

 

 

Thanks and hope it can help you. 

Mike

---------------------------------

Did I answer your question? Please consider to Mark my post as a solution! to guide others

Hi,

 

Thanks for the tip. I did try this. 

What happens is no matter what you do or how you do it, if you have a process or UI that is now running as an elevated user, Flow will not interact with it. I can confirm because I can have 2 windows side by side, one normal and the other elevated and the elevated one gets completely ignored even by UI selector.

 

You try and send a mouse click on the elevated UI and it will fail.

 

But thanks for the input:) 

miketran13
Impactful Individual
Impactful Individual

Hi 

 

I see your problem and What I mean is that, you just need to make your PowerShell script you need to be run as an Administrator and you don't need to interact with it. Since, you can't interact with the PowerShell while running as an administrator so that you have to use another way to verify the status by creating a log file in the PowerShell script. So, your PowerShell script will be run as an administrator without interaction and it will write the status to a text file or csv file or whatever. 

Then your flow needs to wait for that file with the status. So, you just need to call your PowerShell script (with the elevated code inside) from Power Automate Desktop.

 

Screenshot 2021-01-27 060953.png

 

Thanks and hope it can help you. 

Mike

---------------------------------

Did I answer your question? Please consider to Mark my post as a solution! to guide others

Jspeer1
Helper II
Helper II

@miketran13 

 

Thanks for getting back to me.

So I did just that.

 

I saved me PS1 script with the code snippet you posted earlier and ran Desktop Flow. It will run the PS1 as an administrator.

 

How do I go about:

1. Getting the output to then use as conditions in Flow?

2. I do need my 2 variables from Flow to be inputted or rather written to the PS1 script itself. I now cannot input anything if I do read-host as Flow will not interact with the UI as it's running as admin, but my script for sure needs two variables which are obtained by my previous steps in flow.

 

Here is a visual representation of my PS1:

ps11.PNG

 

I need $UserName and $ComputerName to be "filled out" with variables my flow currently already gathers and stores. Maybe have a way where my Desktop Flow can "write" to the PS1 to store the Variables before it executes the script?

 

 

Thanks again, this is further than I've ever gotten.

miketran13
Impactful Individual
Impactful Individual

Hi, 

I got your problems. This is what I have not tried yet but please try if you think it is possible.

 

Since you can't interact with the PowerShell script run as administrator, so you should try another way. First, you can write your params to a CSV / Text / Xml file in PAD. Then from your PowerShell script you will need to read the params from this file. When you finished with your PowerShell steps, you should write a status to a new file. Then from your PAD step, you can wait for that file is created and to finish your steps in PAD.

Untitled.png

Untitled1.png

 

That was my thoughts. I'm not sure it is applicable for you or not. But it worth a try I think 🙂 

 

Thanks and hope it can help you. 

Mike

---------------------------------

Did I answer your question? Please consider to Mark my post as a solution! to guide others

Thank you! I was finally able to put it all together. I ended up storing the two variables in a text file and them my main PS script called those variables with Get-Content. Works like a charm.

 

if (!([Security.Principal.WindowsPrincipal][Security.Principal.WindowsIdentity]::GetCurrent()).IsInRole([Security.Principal.WindowsBuiltInRole] "Administrator")) { Start-Process powershell.exe "-NoProfile -ExecutionPolicy Bypass -File `"$PSCommandPath`"" -Verb RunAs; exit }

Thanks for this, it seems to be a life-saver to me. However I have the exact same PS1 file on two Windows 10 machines, one machine executes this line without asking any question, but on the other machine when this line is executed the UAC asks the PowerShell to open as Administrator which stops the PAD from executing the PS1 file entirely.


mohammadtaha_0-1632992192337.png

 

What might be causing this?

I don't know what is causing it, but you can put a workaround.  I've done something similar where I loop looking for two images.  1 image (the interruption like this) performs an action, in this case Send Keys {Tab}{Enter}.

 

The other image (the right one) exits the loop and continues the flow.  So it looks like this:


  • Loop starting at 1 to index 9999
    • If %interruption_image% exists
      • Send Keys {Tab}{Enter}
      • Exit Loop
    • End IF
    • If %success_image% exists
      • Exit Loop
    • End IF
  • End Loop
  • Continue Process

Best of Luck!

 

----
If my post has answered your question, please thumbs up and mark this post as a solution.

I also offer paid consulting services. If you would like to discuss this option, please feel free to DM me and we can set up a time to join a Zoom call and fix any issues you are having.

Hi @Jspeer1 and @miketran13 , If I understand this thread correctly, I have the same issue what you faced as below. 

 

I have to run my PAD flow ( in unattended\attended mode ) using local administrator privileges, because with normal user , I can't be able to interact my UI elements and automation is not recognizing the UI elements with in the application. UAC has to be disabled otherwise it is interrupting for automation. 

 

could you please give me a clue , how can I call this PAD flow from Cloud flow and run it with PAD administrator ?

 

 

Anonymous
Not applicable

Were you able to find how to call a PAD flow as an administrator from Cloud flow? Could you please provide the solution here if you found it already. Thanks!

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!   Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪 🌠  

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!  Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Users online (5,617)