cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Bad Gateway

Flows were working up until 19 hours ago, no flows have run since then, I now get a bad gateway error, with the following: -

 

{
  "error": {
    "code": 502,
    "source": "europe-001.azure-apim.net",
    "clientRequestId": "dbf49874-bd41-4c76-9727-8288d6edace5",
    "message": "BadGateway",
    "innerError": {
      "status": 500,
      "message": "Value does not fall within the expected range.\r\nclientRequestId: dbf49874-bd41-4c76-9727-8288d6edace5\r\nserviceRequestId: 9b68839e-7081-6000-3f28-e457108e5d25"
    }
  }
}
 

I have tried deleting the connectors for both Sharepoint and Outlook and recreating them but no success.

 

On test the flow fails immediately.

 

Bizarrely these failed runs do not show in the run history

image.png

15 REPLIES 15
v-yamao-msft
Community Support
Community Support

Hi @Anonymous,

 

How is your flow created? Could you share a screenshot on your flow?

 

Are you now still having the issue on your side?

 

You said that the failed runs don’t show in the run history, could you check them by clicking See all?

 

I created a simple flow to send an email when a SharePoint item is added in a list, it worked fine and didn’t return any error message.

 

Error 502 means the failure is temporary or transient, please try to resubmit to try the flow again.

 

If you are still having the issue, please feel free post back. 

 

 

 

Best regards,

Mabel Mao

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Anonymous
Not applicable

Hi Mabel,

 

Please find attached 3 images: -

 

1) Top section of flow

2) Overview of entire flow

3) Error

 

112233

Yes the issue still exists, no change at all.

 

Yes I did that, last run in the history is dated 9th August.

 

Well thats good, but as I said the flow was working for days with no problems and then it stopped, no changes were made it just stopped working.

 

I wouldnt say a failure that has now been occuring for over 3 days is temporary or transient, you are just telling me what it says in the troubleshooting guide, could you explain exactly how to resubmit, as there is no resubmit button, maybe share a screenshot? If you mean edit and save the flow I have probably done this around 100+ times, not very temporary or transient eh???

Anonymous
Not applicable

Also for your information I have just created a new flow that simply sends an email when an item is created or modified and this also fails...

Anonymous
Not applicable

Again for your information, if I change the List Name to a different list the flow does not fail, If I change it back the flow fails immediately with the Bad Gateway error...

Anonymous
Not applicable

Any Update??

I have the same issue, same error message.  BadGateway or Bad Gateway

 

It happens in the SharePoint Get item action.  My flow was working fine for many days until it simply stopped working about a week ago.  I tested using new flows and new lists and the same issue occurs.

 

More details:

 

“error”: {
“code”: 502,
“source”: “flow-apim-msmanaged-na-centralus-01.azure-apim.net”,
“clientRequestId”: “7efe60db-ed54-428a-b79c-201bbb8fb2a8”,
“message”: “BadGateway”,
“innerError”: {
“status”: 500,
“message”: “Value does not fall within the expected range.\r\nclientRequestId: 7efe60db-ed54-428a-b79c-201bbb8fb2a8\r\nserviceRequestId: 01b7849e-00ca-6000-4972-d018cc4386ac”

Also, in my “Get item” action I double-checked the list name & location is correct, the Id is simply 1, and it makes no difference if I select "All Items" view or “Limit Columns by View.”

 

I am going to assume this is a Microsoft bug that was introduced a week ago.  I will wait for it to be fixed, but I already developed a workaround.  I simply hard-coded in the data that I want, instead of calling it from a list.  Makes the flow less flexible but it still works.

 

Also, I learned something useful, and that is to use the "Configure run after" setting to allow my flow to continue even after the error.  I put my "Get item" and "Set variable" into a Scope box.  If anything in that Scope fails, the next action is configured to run regardless.  And the variable already had a default value.  Also make sure not to run your Set Variable if the Get Item fails.  Maybe this tip will help someone else out there.

I am also having the same issue.  Bad Gateway error on my Sharepoint "when a new item is created" flow since yesterday 8/14.

When a new item is created, it does not show in the run history.

 

I tried rebuilding the flow, but that did not solve the issue.

I am having the exact issue. One of our Get Items step is limiting the columns by View because it has "too many lookup columns" so this completely broke my flow.

Care you elavorate in how you got it working? I am new to Flow and Sharepoint and I am in a deadline to get this corrected ASAP so I cant exactly wait for Microsoft to fix the bug.  

Its a simple command to just get all the items in the list and export the list via HTTP to another Flow to make an addition to a column. Here is what it looks like but since Sunday this week it stopped working.

2018-08-15 15_32_47-Edit your flow _ Microsoft Flow.png

 

Any help is appreciate it. 

Thank you! 

~Edgar

 

Anonymous
Not applicable

Hi,

 

I am also experincing the same issue with a FLOW on an Update Item action. The flow ran successfully 2 weeks ago.

My runs do however detail the failed attempt in the history list though.

 

Has anyone logged a support call or received feedback on the issue?

 

Thanks,
Angela

I have my IT Ops director submitting a ticket on my behalf today.  I will let you know if I find anything out!  

 

Sometimes it is nice to know I am not the only one having issues!

Anonymous
Not applicable

I also have the same issue. I think "Limit Columns by View" is not functioning properly 

Anonymous
Not applicable

Hi,

 

So I received feedback from Microsoft on the support ticket logged. The issue is being ongoing with their Product Team and they offered me the following workaround which I tested and seems to have resolved my issue.

 

"to get past the error remove the All Items selection from the View Columns as highlighted value. Use backspace to remove the selection"

 

Capture.PNG

 

 

Angela

 

 

That seems to work.  I removed the Limit Columns by View and no more error.  Thanks!

GabrielStJohn
Community Champion
Community Champion

Hello, @Anonymous!

 

Thank you for posting on the Flow Community Forum! Have you had an opportunity to apply @Anonymous‘s recommendation to adapt your Flow? If yes, and you find that solution to be satisfactory, please go ahead and click “Accept as Solution” so that this thread will be marked for other users to easily identify!


Thank you for being an active member of the Flow Community!

 

-Gabriel
Flow Community Manager

- Gabriel
Community Manager
Power Automate | Power Virtual Agents
Super User Program Manager



Anonymous
Not applicable

Unfortunately that solution was not possible for my scenarion as the SharePoint list the flow was pointing to had around 30 lookup columns therefore removing the filter just created another problem.

 

Could you please confirm that the initial issue has now been resolved as my only solution to this problem was to stop using Flow and go back to using Workflows with SPD. 

 

I do now however have a requirement to use Flow properly to link to other applications but again the lists within SharePoint will have many Lookup Columns so I will need to use a filtered view within my flow.

 

Thanks

Helpful resources

Announcements

Celebrating the May Super User of the Month: Laurens Martens

  @LaurensM  is an exceptional contributor to the Power Platform Community. Super Users like Laurens inspire others through their example, encouragement, and active participation. We are excited to celebrated Laurens as our Super User of the Month for May 2024.   Consistent Engagement:  He consistently engages with the community by answering forum questions, sharing insights, and providing solutions. Laurens dedication helps other users find answers and overcome challenges.   Community Expertise: As a Super User, Laurens plays a crucial role in maintaining a knowledge sharing environment. Always ensuring a positive experience for everyone.   Leadership: He shares valuable insights on community growth, engagement, and future trends. Their contributions help shape the Power Platform Community.   Congratulations, Laurens Martens, for your outstanding work! Keep inspiring others and making a difference in the community!   Keep up the fantastic work!        

Check out the Copilot Studio Cookbook today!

We are excited to announce our new Copilot Cookbook Gallery in the Copilot Studio Community. We can't wait for you to share your expertise and your experience!    Join us for an amazing opportunity where you'll be one of the first to contribute to the Copilot Cookbook—your ultimate guide to mastering Microsoft Copilot. Whether you're seeking inspiration or grappling with a challenge while crafting apps, you probably already know that Copilot Cookbook is your reliable assistant, offering a wealth of tips and tricks at your fingertips--and we want you to add your expertise. What can you "cook" up?   Click this link to get started: https://aka.ms/CS_Copilot_Cookbook_Gallery   Don't miss out on this exclusive opportunity to be one of the first in the Community to share your app creation journey with Copilot. We'll be announcing a Cookbook Challenge very soon and want to make sure you one of the first "cooks" in the kitchen.   Don't miss your moment--start submitting in the Copilot Cookbook Gallery today!     Thank you,  Engagement Team

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Check Out the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community.  We can't wait to see what you "cook" up!    

Welcome to the Power Automate Community

You are now a part of a fast-growing vibrant group of peers and industry experts who are here to network, share knowledge, and even have a little fun.   Now that you are a member, you can enjoy the following resources:   Welcome to the Community   News & Announcements: The is your place to get all the latest news around community events and announcements. This is where we share with the community what is going on and how to participate.  Be sure to subscribe to this board and not miss an announcement.   Get Help with Power Automate Forums: If you're looking for support with any part of Power Automate, our forums are the place to go. From General Power Automate forums to Using Connectors, Building Flows and Using Flows.  You will find thousands of technical professionals, and Super Users with years of experience who are ready and eager to answer your questions. You now have the ability to post, reply and give "kudos" on the Power Automate community forums. Make sure you conduct a quick search before creating a new post because your question may have already been asked and answered. Galleries: The galleries are full of content and can assist you with information on creating a flow in our Webinars and Video Gallery, and the ability to share the flows you have created in the Power Automate Cookbook.  Stay connected with the Community Connections & How-To Videos from the Microsoft Community Team. Check out the awesome content being shared there today.   Power Automate Community Blog: Over the years, more than 700 Power Automate Community Blog articles have been written and published by our thriving community. Our community members have learned some excellent tips and have keen insights on the future of process automation. In the Power Automate Community Blog, you can read the latest Power Automate-related posts from our community blog authors around the world. Let us know if you'd like to become an author and contribute your own writing — everything Power Automate-related is welcome.   Community Support: Check out and learn more about Using the Community for tips & tricks. Let us know in the Community Feedback  board if you have any questions or comments about your community experience. Again, we are so excited to welcome you to the Microsoft Power Automate community family. Whether you are brand new to the world of process automation or you are a seasoned Power Automate veteran - our goal is to shape the community to be your 'go to' for support, networking, education, inspiration and encouragement as we enjoy this adventure together.     Power Automate Community Team

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Users online (2,597)