cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Bad Gateway

Flows were working up until 19 hours ago, no flows have run since then, I now get a bad gateway error, with the following: -

 

{
  "error": {
    "code": 502,
    "source": "europe-001.azure-apim.net",
    "clientRequestId": "dbf49874-bd41-4c76-9727-8288d6edace5",
    "message": "BadGateway",
    "innerError": {
      "status": 500,
      "message": "Value does not fall within the expected range.\r\nclientRequestId: dbf49874-bd41-4c76-9727-8288d6edace5\r\nserviceRequestId: 9b68839e-7081-6000-3f28-e457108e5d25"
    }
  }
}
 

I have tried deleting the connectors for both Sharepoint and Outlook and recreating them but no success.

 

On test the flow fails immediately.

 

Bizarrely these failed runs do not show in the run history

image.png

15 REPLIES 15
v-yamao-msft
Community Support
Community Support

Hi @Anonymous,

 

How is your flow created? Could you share a screenshot on your flow?

 

Are you now still having the issue on your side?

 

You said that the failed runs don’t show in the run history, could you check them by clicking See all?

 

I created a simple flow to send an email when a SharePoint item is added in a list, it worked fine and didn’t return any error message.

 

Error 502 means the failure is temporary or transient, please try to resubmit to try the flow again.

 

If you are still having the issue, please feel free post back. 

 

 

 

Best regards,

Mabel Mao

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Anonymous
Not applicable

Hi Mabel,

 

Please find attached 3 images: -

 

1) Top section of flow

2) Overview of entire flow

3) Error

 

112233

Yes the issue still exists, no change at all.

 

Yes I did that, last run in the history is dated 9th August.

 

Well thats good, but as I said the flow was working for days with no problems and then it stopped, no changes were made it just stopped working.

 

I wouldnt say a failure that has now been occuring for over 3 days is temporary or transient, you are just telling me what it says in the troubleshooting guide, could you explain exactly how to resubmit, as there is no resubmit button, maybe share a screenshot? If you mean edit and save the flow I have probably done this around 100+ times, not very temporary or transient eh???

Anonymous
Not applicable

Also for your information I have just created a new flow that simply sends an email when an item is created or modified and this also fails...

Anonymous
Not applicable

Again for your information, if I change the List Name to a different list the flow does not fail, If I change it back the flow fails immediately with the Bad Gateway error...

Anonymous
Not applicable

Any Update??

I have the same issue, same error message.  BadGateway or Bad Gateway

 

It happens in the SharePoint Get item action.  My flow was working fine for many days until it simply stopped working about a week ago.  I tested using new flows and new lists and the same issue occurs.

 

More details:

 

“error”: {
“code”: 502,
“source”: “flow-apim-msmanaged-na-centralus-01.azure-apim.net”,
“clientRequestId”: “7efe60db-ed54-428a-b79c-201bbb8fb2a8”,
“message”: “BadGateway”,
“innerError”: {
“status”: 500,
“message”: “Value does not fall within the expected range.\r\nclientRequestId: 7efe60db-ed54-428a-b79c-201bbb8fb2a8\r\nserviceRequestId: 01b7849e-00ca-6000-4972-d018cc4386ac”

Also, in my “Get item” action I double-checked the list name & location is correct, the Id is simply 1, and it makes no difference if I select "All Items" view or “Limit Columns by View.”

 

I am going to assume this is a Microsoft bug that was introduced a week ago.  I will wait for it to be fixed, but I already developed a workaround.  I simply hard-coded in the data that I want, instead of calling it from a list.  Makes the flow less flexible but it still works.

 

Also, I learned something useful, and that is to use the "Configure run after" setting to allow my flow to continue even after the error.  I put my "Get item" and "Set variable" into a Scope box.  If anything in that Scope fails, the next action is configured to run regardless.  And the variable already had a default value.  Also make sure not to run your Set Variable if the Get Item fails.  Maybe this tip will help someone else out there.

I am also having the same issue.  Bad Gateway error on my Sharepoint "when a new item is created" flow since yesterday 8/14.

When a new item is created, it does not show in the run history.

 

I tried rebuilding the flow, but that did not solve the issue.

I am having the exact issue. One of our Get Items step is limiting the columns by View because it has "too many lookup columns" so this completely broke my flow.

Care you elavorate in how you got it working? I am new to Flow and Sharepoint and I am in a deadline to get this corrected ASAP so I cant exactly wait for Microsoft to fix the bug.  

Its a simple command to just get all the items in the list and export the list via HTTP to another Flow to make an addition to a column. Here is what it looks like but since Sunday this week it stopped working.

2018-08-15 15_32_47-Edit your flow _ Microsoft Flow.png

 

Any help is appreciate it. 

Thank you! 

~Edgar

 

Anonymous
Not applicable

Hi,

 

I am also experincing the same issue with a FLOW on an Update Item action. The flow ran successfully 2 weeks ago.

My runs do however detail the failed attempt in the history list though.

 

Has anyone logged a support call or received feedback on the issue?

 

Thanks,
Angela

I have my IT Ops director submitting a ticket on my behalf today.  I will let you know if I find anything out!  

 

Sometimes it is nice to know I am not the only one having issues!

Anonymous
Not applicable

I also have the same issue. I think "Limit Columns by View" is not functioning properly 

Anonymous
Not applicable

Hi,

 

So I received feedback from Microsoft on the support ticket logged. The issue is being ongoing with their Product Team and they offered me the following workaround which I tested and seems to have resolved my issue.

 

"to get past the error remove the All Items selection from the View Columns as highlighted value. Use backspace to remove the selection"

 

Capture.PNG

 

 

Angela

 

 

That seems to work.  I removed the Limit Columns by View and no more error.  Thanks!

GabrielStJohn
Community Champion
Community Champion

Hello, @Anonymous!

 

Thank you for posting on the Flow Community Forum! Have you had an opportunity to apply @Anonymous‘s recommendation to adapt your Flow? If yes, and you find that solution to be satisfactory, please go ahead and click “Accept as Solution” so that this thread will be marked for other users to easily identify!


Thank you for being an active member of the Flow Community!

 

-Gabriel
Flow Community Manager

- Gabriel
Community Manager
Power Automate | Power Virtual Agents
Super User Program Manager



Anonymous
Not applicable

Unfortunately that solution was not possible for my scenarion as the SharePoint list the flow was pointing to had around 30 lookup columns therefore removing the filter just created another problem.

 

Could you please confirm that the initial issue has now been resolved as my only solution to this problem was to stop using Flow and go back to using Workflows with SPD. 

 

I do now however have a requirement to use Flow properly to link to other applications but again the lists within SharePoint will have many Lookup Columns so I will need to use a filtered view within my flow.

 

Thanks

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Results posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (3,750)