cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
EGreen
Advocate I
Advocate I

Item Id doesn't belong to the current mailbox

Hopefully my final edit... @Anonymous alerted us that Microsoft has added a "Mailbox Address" field to Outlook actions. You can enter the address of the shared mailbox in this field to get back to original functionality. I'm keeping all previous solution details below just in case.

 

I've accepted the solution provided by @Anonymous on page 3. As a note for future users running into this issue, this solution requires a premium account. This will not be the best solution for a number of users (myself included), but it's the Microsoft-supported fix and (hopefully) the least likely to fail in the future. 

 

For more information on the Graph API solution, check the posts by @jonathanford on pages 5 and 6. 

 

If you do not have a premium account, the solution on page 3 offered by @Mindaugas is your best bet. You will need to add a new connection to Flow for the shared mailbox and then select that account as the connection for your Flow step. @RHCC gives more details on page 4 - you will also most likely need to add a password to the shared mailbox which is not intuitive. 

 

This is by far the easiest solution, but I'm concerned how long it will work before Microsoft breaks functionality in an update. They do not support shared mailbox connections in Flows that don't specifically use that language, which is a frustrating response given how many users were relying on these Flows for their daily business. 

 

Original post below:

 

Hi all - I'm having an issue with a couple Flows that were previously working without error.

 

When a new email arrives in a shared mailbox runs in a separate Flow and creates a SharePoint list item. One of the attributes added is the id of the trigger email (MessageId from the triggerBody). 

 

I have two other Flows that will reply to this initial email using Reply to email. The stored MessageId is used to reply to the correct email. This has been working for 4+ months without error, but started failing today with the error shown in the Subject (Item Id doesn't belong to the current mailbox). 

 

Myself and one other user are not having this failure. I had a user who was experiencing the failure check their connections in Flow and all apps were still connected. I also had them check their access to the shared inbox in Outlook and they still had full access.  

 

Has anyone run into something similar or have any suggestions? It seems like it must be a user connection to the shared inbox but I'm not sure what else to look into. Thanks!

 

**Editing to note that the Get email step is also failing when referencing the ID of an email in a shared mailbox.

146 REPLIES 146
clinton
Advocate I
Advocate I

Also having the same issue in our organisation. Not ideal for our production Flows...

Anonymous
Not applicable

Yesterday the flow just seemed to break, giving the "Item Id doesn't belong to the current mailbox" error. I've deleted the connections, recreated a whole new flow, and still nothing. This is essential to our customer service team's productivity, so this is really killing us right now!

Ensure you open a support ticket if you have the ability.

sobenson
Resolver I
Resolver I

I opened a ticket with MS and after they did some research here is their response:

 

"using actions like “Get Email” and “Delete Email” in Shared Mailboxes is currently not supported, per the documentation for this connector: https://docs.microsoft.com/en-us/connectors/office365/#shared-mailbox-support. Only triggers and actions with Shared Mailbox in the name are supported.

This has been documented for some time but was working. It seems last week a change [with Outlook and Exchange] was finally made that broke this functionality. As mentioned in that documentation, the suggested workaround is to use the “HTTP with Azure AD” connector and the Graph API to work with items in Shared Mailboxes."

 

I've not had time to look into the linked document.  

Then why in the world is their a trigger for Shared Mailbox? If it's not supported, don't give the option. 

 

EDIT: 

So we can trigger on a shared mailbox, but just email based on the trigger? Isn't that the only action with Shared Mailbox in the name? So we can't do anything with the email? 

jonathanford
Helper II
Helper II

Anonymous
Not applicable

Pretty much.  The details about the email are available from that original trigger.  But actions are no longer available via the Flow Actions.  Instead, you will need to use the HTTP Service call and create the command to perform the actions that are still available.  At least that is what the say in a generic response.  The information in that link provides limited guidance.

 

At least the documentation says something like "the other operations do not support shared mailboxes as of yet." so they may be re-adding the actions via simple flow actions.

I think I could get over it, if I could just get a kick in my butt with how to get the HTTP with Azure AD action setup. I've done API work with JSON in Flow before. From some light research, I probably should've done it this way to begin with but man the other way was so much easier. If it wasn't supposed to work and it did and now they've broken it, it makes it all the more maddening. 

bf
Frequent Visitor

Hey guys,

 

I started having this problem myself and seem to have fixed it.

 

What I noticed was that the connection had changed on the delete email action from the shared mailbox connection to my own mailbox connection.

 

So, check that the connection you are using for both Get Email and Delete Email are the same, normally for the shared mailbox.

Anonymous
Not applicable

I found a "solution". Which is actually just doing what Microsoft is advising us to do: Use the Graph API.

 

First step is to use the HTTP with Azure AD connector: Invoke an HTTP request:

 

0.png

 

Then you have to create a new connection. In the documentation, Microsoft specifies that we must use "https://graph.microsoft.com/" as both the Base Resource URL and the Azure Resource URI:

 

1.png

Then simply click on "Sign In", and use your personal credentials.

 

Now you can simply refer to the Outlook REST API documentation (or the rest of Microsoft Graph).

Example on how to flag an e-mail:

 

2.png

 

Remember to change the shared mailbox in the URL: ENTERSHAREDMAILBOX@HERE.COM should of course be replaced with the shared mailbox that you are working with.

Mindaugas
Frequent Visitor

Hey Guys got this problem from Wednesday too. I have a flow witch reads mail in sharedmailbox, saves attachmetns to sharepoint and marks email as read.

 

1. First you have to know password of sharedmailbox IF Not go admin center -> active user -> find shared mailbox and get password.

 

2. Go to your MS flow that keeps failing. Then Edit.

 

3. Find action that is failing in my case it was "Mark as read or unread V2"

 

4. Then push 3 dots. And there is +Add new connection select it.

15.png

 

5. Enter sharedmailbox adress and password.

 

6. Checked if it appeared among other conections. As in step 4 if not try again. ( Few times needed for me.)

 

Wordked for me.

Okay, so that actually means that we need Premium to get this to work with Graph API? This is just great...

 

Is there any proper answer from MS, if all actions cannot be used with sharedmailbox or specific ones? Apparently Move Email still works for me, but other dont.

My hero, @Mindaugas!

@Mindaugas , this solution worked for me. 

 

Thx a lot.

In logic Apps - Get Atachments stlill in error - adding connection did not help for me

Anonymous
Not applicable

The same for me: I still have error at "Get Attachments" action in Flow.
I even can't create new connection with the shared mailbox address...

 

@Mindaugas, could you be more explicit on "how to add new connection with shared mailbox"?

Thank you!

The way I added the connection was through the left pane, Data > Connections > New Connection > Search Outlook > choose the Office 365 one > Create > enter credentials

 

From the Flow: click the three dots on your action and select the newly created Connection. 

Anonymous
Not applicable

Thank you, @jonathanford!

 

But it doesn't worked for me, due to the fact I don't have permission to admin center settings.

I have solved the issue in other way:
1. I have created a rule for the specific shared mailbox to redirect all arrived emails to my personal mailbox;

2. I have created a second rule to move all emails arrived from the specific shared mailbox to my personal mailbox to move to a specific folder inside Inbox;

3. I have changed the trigger in Flow: 

1.png

In this way, I ran from adding new user in Admin Center and creating new connections (connection with shared mailbox) in Flow.


Here's the generic setup to get all attachments once you trigger the email:

Untitled 3.png

 

Where the Function for the URL is:

concat('/v1.0/users/SHAREDEMAIL@DOMAIN.EXT/messages/',triggerBody()?['id'],'/attachments/',items('For_each')?['id'],'/$value')

 

Anonymous
Not applicable

I see @rhalabicki, but your solution it's applicable only for Premium Accounts, not for the ones with Standard Plan.

Helpful resources

Announcements

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip: Getting Started with Private Messages & Macros

Welcome to TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   This Week's Tip: Private Messaging & Macros in Power Apps Community   Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member!   Our Knowledge Base article about private messaging and macros is the best place to find out more. Check it out today and discover some key tips and tricks when it comes to messages and macros:   Private Messaging: Learn how to enable private messages in your community profile and ensure you’re connected with other community membersMacros Explained: Discover the convenience of macros—prewritten text snippets that save time when posting in forums or sending private messagesCreating Macros: Follow simple steps to create your own macros for efficient communication within the Power Apps CommunityUsage Guide: Understand how to apply macros in posts and private messages, enhancing your interaction with the Community For detailed instructions and more information, visit the full page in your community today:Power Apps: Enabling Private Messaging & How to Use Macros (Power Apps)Power Automate: Enabling Private Messaging & How to Use Macros (Power Automate)  Copilot Studio: Enabling Private Messaging &How to Use Macros (Copilot Studio) Power Pages: Enabling Private Messaging & How to Use Macros (Power Pages)

Tuesday Tip: Subscriptions & Notifications

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week: All About Subscriptions & Notifications We don't want you to a miss a thing in the Community! The best way to make sure you know what's going on in the News & Announcements, to blogs you follow, or forums and galleries you're interested in is to subscribe! These subscriptions ensure you receive automated messages about the most recent posts and replies. Even better, there are multiple ways you can subscribe to content and boards in the community! (Please note: if you have created an AAD (Azure Active Directory) account you won't be able to receive e-mail notifications.)   Subscribing to a Category  When you're looking at the entire category, select from the Options drop down and choose Subscribe.     You can then choose to Subscribe to all of the boards or select only the boards you want to receive notifications. When you're satisfied with your choices, click Save.     Subscribing to a Topic You can also subscribe to a single topic by clicking Subscribe from the Options drop down menu, while you are viewing the topic or in the General board overview, respectively.     Subscribing to a Label Find the labels at the bottom left of a post.From a particular post with a label, click on the label to filter by that label. This opens a window containing a list of posts with the label you have selected. Click Subscribe.     Note: You can only subscribe to a label at the board level. If you subscribe to a label named 'Copilot' at board #1, it will not automatically subscribe you to an identically named label at board #2. You will have to subscribe twice, once at each board.   Bookmarks Just like you can subscribe to topics and categories, you can also bookmark topics and boards from the same menus! Simply go to the Topic Options drop down menu to bookmark a topic or the Options drop down to bookmark a board. The difference between subscribing and bookmarking is that subscriptions provide you with notifications, whereas bookmarks provide you a static way of easily accessing your favorite boards from the My subscriptions area.   Managing & Viewing Your Subscriptions & Bookmarks To manage your subscriptions, click on your avatar and select My subscriptions from the drop-down menu.     From the Subscriptions & Notifications tab, you can manage your subscriptions, including your e-mail subscription options, your bookmarks, your notification settings, and your email notification format.     You can see a list of all your subscriptions and bookmarks and choose which ones to delete, either individually or in bulk, by checking multiple boxes.     A Note on Following Friends on Mobile Adding someone as a friend or selecting Follow in the mobile view does not allow you to subscribe to their activity feed. You will merely be able to see your friends’ biography, other personal information, or online status, and send messages more quickly by choosing who to send the message to from a list, as opposed to having to search by username.

Users online (3,121)