cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Daryl_K
Helper IV
Helper IV

Binary Condition worked for months - then stopped?

I had a Flow that has worked for many months, then out of the blue around the end of March / beginning of April a binary Condition no longer evalauates correctly. The Flow does NOT fail - it succeeds every time, but the binary condition it looks for always evaluates as FALSE - even though I can clearly see there are 10 entries in the list that satisfy the criteria!

 

This Flow has a special View that no one uses for anything else, and I verified it's still looking at that View (it is). At the beginning it intitializes a Boolean variable called "No" and sets it equal to false. Then at a later point it does an "Apply to each" and cycles through the list comparing a Boolean column value to the variable. If they are equal (the column value is false) it continues down a branch.

 

That Control succeeds every time, but it returns 100% false outputs, meaning it goes down the "If no" branch after every execution, even though (as I mentioned above) 10 entries satisfy the requirements.

 

This one has my head spinning, primarily because it worked correctly 100% of the time for 9 months. Now it works incorrectly 100% of the time, and I can't figure out what may have changed!

1 ACCEPTED SOLUTION

Accepted Solutions

Well, the good news is the compare operation is still broken and I don't now why, but I've figured out how to completely work around it by ditching that instruction altogether and using an ODATA filter on my Get items action in the Flow. The filter is simply OCNMIR_Closed eq false which works perfectly since the entire Flow is supposed to ignore entries where that condition is True anyway! As a bonus my Flow runs much faster, though it's a scheduled recurrence that runs at 4:00 AM (every 24 hours) so it didn't really matter. Still...

Anyway, this fixes my current issue I've been struggling with, but the root causal is still there. Does anyone know the formal route for reporting this to MS? I can easily reproduce it and thing they should be aware...

View solution in original post

5 REPLIES 5
Daryl_K
Helper IV
Helper IV

I should add that despite the Flow using a View that also filters on the relevant binary condition, which leaves exactly 10 list entries, it takes 7 minutes to run through.

This could be a red herring though because I thought I remember that specifying a View only narrows the columns that the Flow looks at, and that Flows do NOT obey the "Show items only when..." conditions in the view. If this is true then that isn't any kind of evidence since the entire list is hundreds of entries long, and 7 minutes to examine them all is not unreasonable.

As a test I added an action under the previously-blank "If no" branch and it executed the same number of times that their is total items in the list. So like I said, it runs sucessfully, but it's like the binary condition always evaluates as false, even though some items should evaluate as true. I checked the column formatting and it's still a binary. The variable is being initialized and set as binary. What's wrong?

Hi @Daryl_K ,

Could you please share a screenshot of your flow's configuration?

As you said, the flow worked well in the past months.

Has the data source been modified?

I suggest you rebuild the flow for a try.

Best Regards,

Community Support Team _ Zhongys

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

 

I rebuilt the Flow - no change.

My entire Flow is huge and would not fit well into a screenshot (unless I made it near-microscopic). I don't think this is necessary though because here are the two key steps (shown below).

The first is where I define a variable as a Boolean, set to false. The second is where I do the compare. You cannot see the entire name but it is a Sharepoint column defined as a Yes/No, essentially a boolean also.

So I do a Get Items and compare the boolean column to a boolean variable, and this column, never, ever evaluates as True, even though there are items that would satisfy the condition as True.

I hoped maybe corruption in the Flow, so I rebuilt an entirely new one from scratch and it did the same thing, so clearly there has been an update where Microsoft broke the boolean compare operation. Since this worked for 5 months with this exact same configuration I can conceive of no other explanation.

2019-06-06_12-48-16.png2019-06-06_12-48-47.png

 

Correction to my previous statements: it seems the error goes further than just binary.

This particular form has a "Closed" state that indicates the work is done. When an operator "closes" an entry it sets the MIROCN_Closed flag (the one I have been trying to evaluate) to "Yes" and takes their log-in info and copies it into a blank text column as a form of digital signature.

I've been trying to check if the MIROCN_Closed flag is equal to FALSE, indicating the entry is still open, but as this has been wholly unsucessful I tried instead checking field the Closing_Signature is blank. As noted, this field is not visible on the form and is auto-populated when the entry is closed, so checking for it to be blank should yield the same results.

And it does...but not in a good way! Just like the binary evaluation this returns a FALSE 100% of the time, despite the fact 11 entries are blank on that field.

This is driving me crazy!

Well, the good news is the compare operation is still broken and I don't now why, but I've figured out how to completely work around it by ditching that instruction altogether and using an ODATA filter on my Get items action in the Flow. The filter is simply OCNMIR_Closed eq false which works perfectly since the entire Flow is supposed to ignore entries where that condition is True anyway! As a bonus my Flow runs much faster, though it's a scheduled recurrence that runs at 4:00 AM (every 24 hours) so it didn't really matter. Still...

Anyway, this fixes my current issue I've been struggling with, but the root causal is still there. Does anyone know the formal route for reporting this to MS? I can easily reproduce it and thing they should be aware...

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!   Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪 🌠  

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!  Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Users online (5,816)