cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Error message with Flow trigger: There’s a problem with the flow’s trigger

When I went into Microsoft Flow today, to check one of my Team Flows, it showed an error message:

'There is a problem with the flow's trigger.'

When I clicked 'Fix the trigger', it showed a 'BadGateway' message.

 

MOC flow picture 1.pngMOC flow picture 2.pngMOC flow picture 3.pngMOC flow picture 4.PNG

 

However, when I went into the Flow to check, the trigger looked normal, and the Flow Checker showed 0 errors and 0warnings.

MOC flow picture 5.pngMOC flow picture 6.png

 

 

When I saved and exited, it seemed ok, but then a minute later the 'There is a problem with the flow's trigger' message appeared again.

 

I don't understand why I am now seeing this error.

The flow ran correctly only a few weeks ago.

 

Hope someone can explain what is going on to me, and how to fix it so that the flow will run when I next need it (within 2 weeks time).

 

Many thanks,

 

Best regards,

 

Adam Bradbury

 

 

1 ACCEPTED SOLUTION

Accepted Solutions


@ericonline wrote:

I'm facing this issue today. The Flow was delayed by 4-5 mins. When checking the runs, I see the "fix the trigger" error. The Flow eventually runs, but this is disheartening. Please advise. 
Thank you

image.png

 

image.png


500, 501 and 502 errors are temporary/transient errors that generally indicate connectivity issues or "blips" in service, and are usually cleared after a short amount of time.

Periodically there are connectivity and/or network issues between the various Office 365 services that cause these type of errors. If the errors persist, you'll need to Contact Flow Support directly for assistance. 

ContactSupport.png

👨🏻‍💻 If this reply answers your question or solves your issue, please ACCEPT AS SOLUTION ☑️. If you find this reply helpful, please consider giving it a LIKE 👍.

View solution in original post

3 REPLIES 3
v-bacao-msft
Community Support
Community Support

Hi @Anonymous ,

 

This seems to be a temporary error since your configuration is no problem.

Please try to solve this problem by using the following two methods.

  • Reconfigure the trigger's connection and see if a similar issue still exists.
  • Or you could click Save as to create a copy of this Flow. A copy of Flow will appear in My flows list. You could check if the Flow has a similar problem. If not, share it with Team users.

Hope it helps.

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

I'm facing this issue today. The Flow was delayed by 4-5 mins. When checking the runs, I see the "fix the trigger" error. The Flow eventually runs, but this is disheartening. Please advise. 
Thank you

image.png

 

image.png


@ericonline wrote:

I'm facing this issue today. The Flow was delayed by 4-5 mins. When checking the runs, I see the "fix the trigger" error. The Flow eventually runs, but this is disheartening. Please advise. 
Thank you

image.png

 

image.png


500, 501 and 502 errors are temporary/transient errors that generally indicate connectivity issues or "blips" in service, and are usually cleared after a short amount of time.

Periodically there are connectivity and/or network issues between the various Office 365 services that cause these type of errors. If the errors persist, you'll need to Contact Flow Support directly for assistance. 

ContactSupport.png

👨🏻‍💻 If this reply answers your question or solves your issue, please ACCEPT AS SOLUTION ☑️. If you find this reply helpful, please consider giving it a LIKE 👍.

View solution in original post

Helpful resources

Announcements
MPA_User Group Leader_768x460.jpg

Manage your user group events

Check out the News & Announcements to learn more.

V3_PVA CAmpaign Carousel.png

Community Challenge - Giveaways!

Participate in the Power Virtual Agents Community Challenge

Carousel 2021 Release Wave 2 Plan 768x460.jpg

2021 Release Wave 2 Plan

Power Platform release plan for the 2021 release wave 2 describes all new features releasing from October 2021 through March 2022.

Users online (3,070)