cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Flow launch panel doesn't load

Hello,

I have an instant flow which I trigger from a Sharepoint list when an item is selected. This flow is used by about 15 users and works very well for all users but one. When this user triggers the flow, the Flow launch panel opens and stays in a loading state forever instead of offering the usual run flow button...flow_lauch_panel.jpg

 Thanks for your help

70 REPLIES 70
v-litu-msft
Community Support
Community Support

Hi @Anonymous,

 

Does this state happen often or occasionally?

It may be caused by the fact that network between Flow and SharePoint, you can refresh the page, and try it again.

 

Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Anonymous
Not applicable

For this single user, it happens all the time, she has never been able to use the flow. We have refreshed the page multiple times, restart the machine, nothing changes. Is there a way to identify where the process get stuck?

Hi @Anonymous,

 

Is she have the permission of the SharePoint list editing?

 

Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Anonymous
Not applicable

Yes she does, and also a run user for the flows

Hi @Anonymous,

 

You can try to use the others browser, Chrome, Firefox, Microsoft Edge, etc.

Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Anonymous
Not applicable

I am facing similar issue. For 2 users , the flow pop up does not load on any of the browsers. We have tried it with IE, Chrome, Mozilla, Edge but nothing works, I have tried every possible solution, 1. Refreshing the page 2. Going incognito 3. Checking List Permissions 4. Clearing cache and cookies 5. Restarting the device. Nothing works. Please advice as this is a critical functionality that our users use on a daily basis and not having it is a big issue

Same issue here since some days. Worked perfectly in the past and stopped for some users at some point in time... 😒

Anonymous
Not applicable

I am having a similar issue with one of my users. The workflow works for everyone else in my organization. I have checked permissions, they are set appropriately. The user is set as a run-only user, using the same browser as everyone else. The panel shows up with a spinning circle when she tries to access.

Any update for this?

MiaMia
Frequent Visitor

I am also facing this exact issue. I had it in the past and it resvoled itself after 2 days.

Now it appeared again and I am clueless as to why it happens and how to solve it...

ro-delafuente
Regular Visitor

try log in and log out microsoft account. clear cache and cookies.

Olivier_1968
Regular Visitor

Hello,

 

I know this topic is quite old but we're having exactly the same situation, only few users can load the Flow launch panel all others have a spinning circle.

Did you find a solution to solve this issue ?

 

Thanks in advance

Olivier

Hi, I've the same issue as well. 
Flows that have been running fine since months or years are now 'broken' for some random users. 
The panel on the right opens, but keep loading forever. 
I've tried with other browsers, clean cache, logging on other computers, but all with no success. 

 

Thanks

Alberto

Hi there
I'm facing the same issue as well.

For some users the solution was to login into powerautomate 1x and then they could start the flow without problems.
But for others the same issue remains. Its kinda random.
Browser has no impact on this problem, it happend with Chrome, Firefox and Edge for the same user.

Crissy
Regular Visitor

Hi, I have the same issue, for some users it works for others no, same permission in Sharepoint list, same permission in power automate, same licencing.

It is possible that after 3 years microsoft does not provide a solution or a workaround?

Thanks

IsraelRC971
Frequent Visitor

Hello, everybody!

 

Do you all reckon that the external user condition has something to do with this problem?

In my case, external users with a specific domain cannot launch workflows, as they get the white loading window infinitely.

What could be the reason? Would it be related to their AD configuration?

Hi,

 

I have same issue as well, one of the employee can't initiate an approval because the panel is just loading.

Any solution for this or what causes this?

 

trilogyadmin_0-1676349463714.png

 

MiaMia
Frequent Visitor

So many replys still to this day!
I have tried some things and:

  • LogIn/LogOut of the Microsoft account + clearing cache doesn't work. I also tried a different browser, but no luck
  • I think external user condition can be ruled out as well, this issue appears for me as an internal user as well
  • AMO1 "For some users the solution was to login into powerautomate 1x and then they could start the flow without problems" -> Interesting! This actually solved it for me. This can't be the final solution for all users, but at least it's a workaround for some cases
JJ_H
New Member

Have tried all solutions listed above - this is still broken for multiple users. No help whatsoever from Microsoft.

 

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Top Kudoed Authors
Users online (2,375)