cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
olgaoszcz
Advocate V
Advocate V

Get error message for the action 'on failure'

Hi, 

I'm trying to set up error handling in one of my flows. I have 'Create file' action and then 'Exacute strored procedure' on failure. First issue i noticed is if my 'create file' failes but the stored procedure is executed, in the run history it still says Flow was succesfull. I don't think thats informative enought - something still failed and it should be visible in the run history.

failed but successfull.png

You can't just say it run successfully, when one of the steps failed...

Second issue I have is that I have the information on which step of my flows failed but I would also like to get the error message flow provides.

errormsg.png

It would make life so much easier to have the error message avaliable as a dynamic content... Does anyone had a similar problem? Any ideas on how to work around it?

 

2 ACCEPTED SOLUTIONS

Accepted Solutions

Hi @olgaoszcz 

 

The action "Create File Failure Event" you have modified the run after settings of this action to run even when the Creaet File Action fails (please click the ... on the action to see the run after settings) and therefore flow carries on the process instead of marking failed because it is being made to move to the next action forcefully when the particular action has failed (makes sense?)

 

The get error message as dynamic content is currently unavailable as a direct action in flow. You can post that as an idea here:

https://powerusers.microsoft.com/t5/Flow-Ideas/idb-p/FlowIdeas

 

Hope this Helps!

 

If this reply has answered your question or solved your issue, please mark this question as answered. Answered questions helps users in the future who may have the same issue or question quickly find a resolution via search. If you liked my response, please consider giving it a thumbs up. THANKS!

 

View solution in original post

MichelH
Advocate V
Advocate V

Hi 

olgaoszcz

 

 

I have been trying to obtain the same thing, just simply getting the error message in flow, and sending it to myself.

 

I found it can be done using the actions() function.

In your case the argument of the action function would be 'Create_file' since that is the name of the component you want to monitor.

It will return an object somewhat like this example of: actions('Set_variable_3')

{
  "name": "Set_variable_3",
  "startTime": "2019-09-09T19:46:51.4123218Z",
  "endTime": "2019-09-09T19:46:51.4123218Z",
  "trackingId": "53a0681f-7810-4bbe-9494-a5cdcdeadb0b",
  "clientTrackingId": "08586335800123686594686241510CU42",
  "clientKeywords": [
    "testFlow"
  ],
  "code": "BadRequest",
  "status": "Failed",
  "error": {
    "code": "InvalidTemplate",
    "message": "Unable to process template language expressions in action 'Set_variable_3' inputs at line '1' and column '2677': 'The template language expression 'actions('conversion_to_currency').outputs.body.status' cannot be evaluated because property 'status' doesn't exist, available properties are 'name, value'. Please see https://aka.ms/logicexpressions for usage details.'."
  }
}

So in my case the name of the component I monitored was 'Set_variable_3' .

 

Now in order for you to get just the error message you can say: actions('Create_file').error.message

If you want to check first if the action failed or succeeded you can check the status: actions('Create_file').status

 

You can use these as arguments in the SQL 'Create_Failure_Event' component to store the error message if any.

Or you use these to fire a terminate component that matches the status

 

Best regards,

 

Michel

 

View solution in original post

31 REPLIES 31

Hi @olgaoszcz 

 

The action "Create File Failure Event" you have modified the run after settings of this action to run even when the Creaet File Action fails (please click the ... on the action to see the run after settings) and therefore flow carries on the process instead of marking failed because it is being made to move to the next action forcefully when the particular action has failed (makes sense?)

 

The get error message as dynamic content is currently unavailable as a direct action in flow. You can post that as an idea here:

https://powerusers.microsoft.com/t5/Flow-Ideas/idb-p/FlowIdeas

 

Hope this Helps!

 

If this reply has answered your question or solved your issue, please mark this question as answered. Answered questions helps users in the future who may have the same issue or question quickly find a resolution via search. If you liked my response, please consider giving it a thumbs up. THANKS!

 

Hi @yashag2255,

Thank you for your message.

I set up the 'on failure' on purpose only after the create file fails to handle the errors. As i understand thats what it was developed for...  https://flow.microsoft.com/en-us/blog/error-handling/

Therfore I do not understand why the flow 'is successfull' when it clearly isnt, only the erros have been handled successfully...

Pstork1
Multi Super User
Multi Super User

Consider putting a Terminate action after the Create File Failure Event and set the status to Failed.  That will let you specify an error code and an error message where you can pass on the error message that you have inside the Flow. That Terminate will only run if the Create File Failure Event runs because the create file failed.  The Terminate command will End the Flow at that point (its the end anyway), mark it as failed, and the errror message will be available in the Flow Run record.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

@olgaoszcz 

 

Yes! On the blog you can see that the error handling was configured to check and introduce a way that if a particular action is successful move and perform an action and if it is not successful (Timed out, Skipped, Failed) then do a particular action. So once you force the flow to perform actionsbased on the previous ones, the logic is built that we have intentionally added the action and we want to log it that way (example: if the action was successful go and update an item on SP and if it failed then log an error to another list or send an email to someone and then configure a retry and things like that). 

 

As @Pstork1 mentions, you can use the terminate action to generate an error code and show the status if something has failed but you cannot use the output of that elsewhere as the flow terminates at that action. 

 

Hope this helps!

If this reply has answered your question or solved your issue, please mark this question as answered. Answered questions helps users in the future who may have the same issue or question quickly find a resolution via search. If you liked my response, please consider giving it a thumbs up. THANKS!

Hi @Pstork1 ,

The Terminate action sounds like a good solution but the Create File Failure Event is not the end of the Flow, it's actually inside the 'apply to each' and I want the Flow to run through the other files even if one of them failed. Also, I want to have the error message as a dynamic content to send it together with the error alert. 

Thanks for your help Smiley Happy

 

Add an action inside the loop right after the action that can fail.  Set the new action to only run if the previous action failed using 'Configure run after'. The new action should set an error message which you can return at the end of the program.  If the previous action succeeds then the error action will be skipped. Make sure to set the other actions after the error action to run if the previous action was successful or skipped.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

Thank you @Pstork1, as you can see from my post, that is exactly what I have done in my Flow. Although, this doesn't allow me to pass the error messages to the next action, there is no possibility to get the error message as dynamic content to pass it thought. This functionality doesnt exist and I'm planning to post that in Flow Ideas.

Thanks for you input.

@olgaoszcz 

 

As mentioned in one of the previous posts, the error message action genearted when an action fails cannot be passed further in the flow right now. It is a good idea to go ahead and create that as an idea on the community forum. 

 

P.S. For some reason this has been happening with me, I am trying to reply to a conversation and then suddenly the accept solution button gets clicked so please excuse me for that. Just trying not to do that (happened on a couple other threads too so my apologies)

 

Can you please mark this thread as answered to the appropraite post(S) that helped you!  Answered questions helps users in the future who may have the same issue or question quickly find a resolution via search.

MichelH
Advocate V
Advocate V

Hi 

olgaoszcz

 

 

I have been trying to obtain the same thing, just simply getting the error message in flow, and sending it to myself.

 

I found it can be done using the actions() function.

In your case the argument of the action function would be 'Create_file' since that is the name of the component you want to monitor.

It will return an object somewhat like this example of: actions('Set_variable_3')

{
  "name": "Set_variable_3",
  "startTime": "2019-09-09T19:46:51.4123218Z",
  "endTime": "2019-09-09T19:46:51.4123218Z",
  "trackingId": "53a0681f-7810-4bbe-9494-a5cdcdeadb0b",
  "clientTrackingId": "08586335800123686594686241510CU42",
  "clientKeywords": [
    "testFlow"
  ],
  "code": "BadRequest",
  "status": "Failed",
  "error": {
    "code": "InvalidTemplate",
    "message": "Unable to process template language expressions in action 'Set_variable_3' inputs at line '1' and column '2677': 'The template language expression 'actions('conversion_to_currency').outputs.body.status' cannot be evaluated because property 'status' doesn't exist, available properties are 'name, value'. Please see https://aka.ms/logicexpressions for usage details.'."
  }
}

So in my case the name of the component I monitored was 'Set_variable_3' .

 

Now in order for you to get just the error message you can say: actions('Create_file').error.message

If you want to check first if the action failed or succeeded you can check the status: actions('Create_file').status

 

You can use these as arguments in the SQL 'Create_Failure_Event' component to store the error message if any.

Or you use these to fire a terminate component that matches the status

 

Best regards,

 

Michel

 

What I was suggesting is that you create a variable.  Then when the action fails set an error message in the variable as the action that runs after failure.  That would preserve the error for the rest of the Flow.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

You can put the result in a variable ofcourse, but I believe the resulting object of action('component_name') will remain available throughout the flow anyway.

 

The action formatting you mention should be there.  The problem is that the question said this was being processed in a loop.  That makes it tough to get back to the specific action that threw the error.  In this case I normally toss the messages into an array so I have all the error messages later.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

Ah OK, bad reading on my part.

I saw the sql statement and thought status was to be written into a DB.

 

 

Hi @MichelH and @Pstork1 ,

 

Thank you @MichelH , that was exactly what I was looking for. The error message is supposed to be entered inside the SQL statement and stored in the database. That makes it easier for me to control the flow reliability. Thank you for your help Smiley Very Happy

 

@Pstork1 - You proposed to insert 'Temrinate' action inside the loop which I cannot do after the 'Create a file' because that will stop the flow immediately while I still want it to be able to loop through the other objects and continue the Flow after the loop. I need the error message only inside the loop. I have another 'on failure' later in the flow to pass errors from future actions. But thatnk you for your help and feedback.

Atima
Microsoft
Microsoft

"outputs('<action_name>')" function (in "expressions" of dynamic content) can be used to capture the output of the specified action. This can capture the errors as well but only if they are generated as output by flow at runtime. So a new step that is configured to run after an action fails can use this function to capture the dynamic error message.

Error as outputError as output

Murderbot
Advocate IV
Advocate IV

It looks like MS has changed the error reporting method recently and I am able to pull the detailed error message from an action with

body('<action name>')['errors']

. Unfortunately, I haven't figured out a way to make this statement dynamic - you have to reference a particular action (can't use variables or nested statements).

If you embed the action in a scope you can use 

 

result('scopename') 

 

to get the full error messages from the action inside the scope that failed. 



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.
MattTaylor
Advocate II
Advocate II

Hi @olgaoszcz,

 

I realise this is a bit late for a reply but just in case anyone searches this in the future and spots this, I believe you can use the outputs expression to pull results of an action - you can then parse that and pull out codes or messages. 

For example: 

 
 

screenshot.png

 

Kind regards,


Matt

 

Hey Michel, the above solution will only check for a specific action. any idea how to get the error message for any action on the flow. Because most of my flow contains more than twenty actions. so, this is not a workable solution I think

Helpful resources

Announcements

Power Platform Connections Ep 15 | L. Baybutt | Thursday, 1 June 2023

Episode Fifteen of Power Platform Connections sees David Warner and Hugo Bernier talk to Microsoft MVP Lewis Baybutt aka Low Code Lewis, alongside the latest news and community blogs.   Use the hashtag #PowerPlatformConnects on social media for a chance to have your work featured on the show.        Action requested: Feel free to provide feedback on how we can make our community more inclusive and diverse.  This episode premiers live on our YouTube at 12pm PST on Thursday 1st June 2023.  Video series available at Power Platform Community YouTube channel.    Upcoming events:  European Power Platform conference – Jun. 20-22nd - Dublin Microsoft Power Platform Conference – Oct. 3-5th - Las Vegas  Join our Communities:  Power Apps Community Power Automate Community Power Virtual Agents Community Power Pages Community  If you’d like to hear from a specific community member in an upcoming recording and/or have specific questions for the Power Platform Connections team, please let us know. We will do our best to address all your requests or questions.  Action requested: Feel free to provide feedback on how we can make our community more inclusive and diverse.  This episode premiers live on our YouTube at 12pm PST on Thursday 1st June 2023.  Video series available at Power Platform Community YouTube channel.    Upcoming events:  European Power Platform conference – Jun. 20-22nd - Dublin Microsoft Power Platform Conference – Oct. 3-5th - Las Vegas  Join our Communities:  Power Apps Community Power Automate Community Power Virtual Agents Community Power Pages Community  If you’d like to hear from a specific community member in an upcoming recording and/or have specific questions for the Power Platform Connections team, please let us know. We will do our best to address all your requests or questions. 

May 2023 Community Newsletter and Upcoming Events

Welcome to our May 2023 Community Newsletter, where we'll be highlighting the latest news, releases, upcoming events, and the great work of our members inside the Biz Apps communities. If you're new to this LinkedIn group, be sure to subscribe here in the News & Announcements to stay up to date with the latest news from our ever-growing membership network who "changed the way they thought about code".         LATEST NEWS "Mondays at Microsoft" LIVE on LinkedIn - 8am PST - Monday 15th May  - Grab your Monday morning coffee and come join Principal Program Managers Heather Cook and Karuana Gatimu for the premiere episode of "Mondays at Microsoft"! This show will kick off the launch of the new Microsoft Community LinkedIn channel and cover a whole host of hot topics from across the #PowerPlatform, #ModernWork, #Dynamics365, #AI, and everything in-between. Just click the image below to register and come join the team LIVE on Monday 15th May 2023 at 8am PST. Hope to see you there!     Executive Keynote | Microsoft Customer Success Day CVP for Business Applications & Platform, Charles Lamanna, shares the latest #BusinessApplications product enhancements and updates to help customers achieve their business outcomes.         S01E13 Power Platform Connections - 12pm PST - Thursday 11th May Episode Thirteen of Power Platform Connections sees Hugo Bernier take a deep dive into the mind of co-host David Warner II, alongside the reviewing the great work of Dennis Goedegebuure, Keith Atherton, Michael Megel, Cat Schneider, and more. Click below to subscribe and get notified, with David and Hugo LIVE in the YouTube chat from 12pm PST. And use the hashtag #PowerPlatformConnects on social media for a chance to have your work featured on the show.         UPCOMING EVENTS   European Power Platform Conference - early bird ticket sale ends! The European Power Platform Conference early bird ticket sale ends on Friday 12th May 2023! #EPPC23 brings together the Microsoft Power Platform Communities for three days of unrivaled days in-person learning, connections and inspiration, featuring three inspirational keynotes, six expert full-day tutorials, and over eighty-five specialist sessions, with guest speakers including April Dunnam, Dona Sarkar, Ilya Fainberg, Janet Robb, Daniel Laskewitz, Rui Santos, Jens Christian Schrøder, Marco Rocca, and many more. Deep dive into the latest product advancements as you hear from some of the brightest minds in the #PowerApps space. Click here to book your ticket today and save!      DynamicMinds Conference - Slovenia - 22-24th May 2023 It's not long now until the DynamicsMinds Conference, which takes place in Slovenia on 22nd - 24th May, 2023 - where brilliant minds meet, mingle & share! This great Power Platform and Dynamics 365 Conference features a whole host of amazing speakers, including the likes of Georg Glantschnig, Dona Sarkar, Tommy Skaue, Monique Hayward, Aleksandar Totovic, Rachel Profitt, Aurélien CLERE, Ana Inés Urrutia de Souza, Luca Pellegrini, Bostjan Golob, Shannon Mullins, Elena Baeva, Ivan Ficko, Guro Faller, Vivian Voss, Andrew Bibby, Tricia Sinclair, Roger Gilchrist, Sara Lagerquist, Steve Mordue, and many more. Click here: DynamicsMinds Conference for more info on what is sure an amazing community conference covering all aspects of Power Platform and beyond.    Days of Knowledge Conference in Denmark - 1-2nd June 2023 Check out 'Days of Knowledge', a Directions 4 Partners conference on 1st-2nd June in Odense, Denmark, which focuses on educating employees, sharing knowledge and upgrading Business Central professionals. This fantastic two-day conference offers a combination of training sessions and workshops - all with Business Central and related products as the main topic. There's a great list of industry experts sharing their knowledge, including Iona V., Bert Verbeek, Liza Juhlin, Douglas Romão, Carolina Edvinsson, Kim Dalsgaard Christensen, Inga Sartauskaite, Peik Bech-Andersen, Shannon Mullins, James Crowter, Mona Borksted Nielsen, Renato Fajdiga, Vivian Voss, Sven Noomen, Paulien Buskens, Andri Már Helgason, Kayleen Hannigan, Freddy Kristiansen, Signe Agerbo, Luc van Vugt, and many more. If you want to meet industry experts, gain an advantage in the SMB-market, and acquire new knowledge about Microsoft Dynamics Business Central, click here Days of Knowledge Conference in Denmark to buy your ticket today!   COMMUNITY HIGHLIGHTS Check out our top Super and Community Users reaching new levels! These hardworking members are posting, answering questions, kudos, and providing top solutions in their communities.   Power Apps:  Super Users: @WarrenBelz, @LaurensM  @BCBuizer  Community Users:  @Amik@ @mmollet, @Cr1t    Power Automate:  Super Users: @Expiscornovus , @grantjenkins, @abm  Community Users: @Nived_Nambiar, @ManishSolanki    Power Virtual Agents:  Super Users: @Pstork1, @Expiscornovus  Community Users: @JoseA, @fernandosilva, @angerfire1213    Power Pages: Super Users: @ragavanrajan  Community Users: @Fubar, @Madhankumar_L,@gospa  LATEST COMMUNITY BLOG ARTICLES  Power Apps Community Blog  Power Automate Community Blog  Power Virtual Agents Community Blog  Power Pages Community Blog  Check out 'Using the Community' for more helpful tips and information:  Power Apps , Power Automate, Power Virtual Agents, Power Pages 

Announcing | Super Users - 2023 Season 1

Super Users – 2023 Season 1    We are excited to kick off the Power Users Super User Program for 2023 - Season 1.  The Power Platform Super Users have done an amazing job in keeping the Power Platform communities helpful, accurate and responsive. We would like to send these amazing folks a big THANK YOU for their efforts.      Super User Season 1 | Contributions July 1, 2022 – December 31, 2022  Super User Season 2 | Contributions January 1, 2023 – June 30, 2023    Curious what a Super User is? Super Users are especially active community members who are eager to help others with their community questions. There are 2 Super User seasons in a year, and we monitor the community for new potential Super Users at the end of each season. Super Users are recognized in the community with both a rank name and icon next to their username, and a seasonal badge on their profile.  Power Apps  Power Automate  Power Virtual Agents  Power Pages  Pstork1*  Pstork1*  Pstork1*  OliverRodrigues  BCBuizer  Expiscornovus*  Expiscornovus*  ragavanrajan  AhmedSalih  grantjenkins  renatoromao    Mira_Ghaly*  Mira_Ghaly*      Sundeep_Malik*  Sundeep_Malik*      SudeepGhatakNZ*  SudeepGhatakNZ*      StretchFredrik*  StretchFredrik*      365-Assist*  365-Assist*      cha_cha  ekarim2020      timl  Hardesh15      iAm_ManCat  annajhaveri      SebS  Rhiassuring      LaurensM  abm      TheRobRush  Ankesh_49      WiZey  lbendlin      Nogueira1306  Kaif_Siddique      victorcp  RobElliott      dpoggemann  srduval      SBax  CFernandes      Roverandom  schwibach      Akser  CraigStewart      PowerRanger  MichaelAnnis      subsguts  David_MA      EricRegnier  edgonzales      zmansuri  GeorgiosG      ChrisPiasecki  ryule      AmDev  fchopo      phipps0218  tom_riha      theapurva  takolota     Akash17  momlo     BCLS776  Shuvam-rpa     rampprakash  ScottShearer     Rusk  ChristianAbata     cchannon  Koen5     a33ik  Heartholme     AaronKnox  okeks      Matren  David_MA     Alex_10        Jeff_Thorpe        poweractivate        Ramole        DianaBirkelbach        DavidZoon        AJ_Z        PriyankaGeethik        BrianS        StalinPonnusamy        HamidBee        CNT        Anonymous_Hippo        Anchov        KeithAtherton        alaabitar        Tolu_Victor        KRider        sperry1625        IPC_ahaas      zuurg    rubin_boer   cwebb365   Dorrinda   G1124   Gabibalaban   Manan-Malhotra   jcfDaniel   WarrenBelz   Waegemma   drrickryp   GuidoPreite   metsshan    If an * is at the end of a user's name this means they are a Multi Super User, in more than one community. Please note this is not the final list, as we are pending a few acceptances.  Once they are received the list will be updated. 

Check out the new Power Platform Communities Front Door Experience!

We are excited to share the ‘Power Platform Communities Front Door’ experience with you!   Front Door brings together content from all the Power Platform communities into a single place for our community members, customers and low-code, no-code enthusiasts to learn, share and engage with peers, advocates, community program managers and our product team members. There are a host of features and new capabilities now available on Power Platform Communities Front Door to make content more discoverable for all power product community users which includes ForumsUser GroupsEventsCommunity highlightsCommunity by numbersLinks to all communities Users can see top discussions from across all the Power Platform communities and easily navigate to the latest or trending posts for further interaction. Additionally, they can filter to individual products as well.   Users can filter and browse the user group events from all power platform products with feature parity to existing community user group experience and added filtering capabilities.     Users can now explore user groups on the Power Platform Front Door landing page with capability to view all products in Power Platform.      Explore Power Platform Communities Front Door today. Visit Power Platform Community Front door to easily navigate to the different product communities, view a roll up of user groups, events and forums.

Microsoft Power Platform Conference | Registration Open | Oct. 3-5 2023

We are so excited to see you for the Microsoft Power Platform Conference in Las Vegas October 3-5 2023! But first, let's take a look back at some fun moments and the best community in tech from MPPC 2022 in Orlando, Florida.   Featuring guest speakers such as Charles Lamanna, Heather Cook, Julie Strauss, Nirav Shah, Ryan Cunningham, Sangya Singh, Stephen Siciliano, Hugo Bernier and many more.   Register today: https://www.powerplatformconf.com/   

Users online (2,763)