cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Kmayes
Post Prodigy
Post Prodigy

Multiple condition issue

I have a flow that i thought would be very easy to create, however i am banging my head against the wall so i'm hoping someone can help with my issue.

My flow currently runs once a day, it then gets the items from a SP list that i have filtered using Odata (to this point it all works fine)

After this point want the flow to run multiple conditions but run through each independently so that the end e-mail can be better customised. So in effect if condition one is met go on to check the next condition...and so on 

 

However when i start adding the send an e-mail action it keeps asking for apply to each again and everything ive tried does not work??

1 ACCEPTED SOLUTION

Accepted Solutions
Anonymous
Not applicable

@Kmayes 

 

ok, so since there are multiple values within "PPENotUsed", you'll need a second Apply to Each loop within the first (lets call it 'Apply to Each 2') so that as you're iterating through each of the List items, you will also iterate through all of the PPENotUsed values for each item. It is inside of this second loop that you'll want to put your append to array action block with an expression like:

 

items('Apply to each 2')?['PPENotUsed']?['Value']

 

it might also be simpler than that, at this point. You might be able to get the value through Dynamic Content, since the item that the second Apply to each loop is iterating through will be the Values of PPENotUsed. So you might be able to pass in "Current Item" to your Append action from the dynamic Content list of Apply to Each 2. Give that a try as well.

 

Hurray for learning!

View solution in original post

26 REPLIES 26
Anonymous
Not applicable

Hello,

 

If you are trying to put Dynamic Content directly from "Get Items" from SP into your email, Power Automate makes you iterate through every item in the list; thus the "Apply to Each" loop.

 

I would suggest initializing a variable(s) and loading whatever custom data you want into the variable(s), then putting the variable(s) in the email.

 

If this doesn't work, please provide some screenshots of your flow to give a better understanding of the situation.

 

thanks,

Kyle

@Anonymous 

Oh ok I think I get what you mean, but may need a bit of guidance as I'm ok with basic flows but not used variables in flows.

 

Below is what i'm currently working with if you need any more info let me know 🙂

 

multiple condition.JPG

 

Hi @Kmayes ,

 

First of all, if it is not necessary to make different actions after every check, then I suggest that you integrate these conditions together to avoid multiple Conditions.

Please check this blog and we could add multiple filters in a Condition.

https://flow.microsoft.com/en-us/blog/build-more-powerful-conditions-in-flows-and-more/

 

Besides, as @Anonymous suggested, if you want to integrate the data in multiple items together and send it via an email, you can refer to the following configuration.

Like:

Spoiler
116.PNG117.PNG

Hope this helps. Feel free to let us know if you have any questions.

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

@v-bacao-msft 

 

Hi I have followed your steps but I still seem to have issues The e-mail part you suggest it tries to wrap it in an apply to each, and the append to array variable, not sure what i have done wrong?

 

So all of my columns are like the following example:

Q1 Yes/ No/ Not Applicable

Q2 (If No to Q1) pick reason why option of about eight answers which can be multiple

 

I really appreciate your support with this issue.

 

1.JPG2.JPG

 

Hi @Kmayes ,

 

Because you reference the output of Get items in the Subject, Apply to each is automatically added.

 

PPE Not Used is a field that supports multiple selections, so when you need to call its field value, Apply to each will also be automatically added so that you can traverse the options contained in the field.

 

If you want to deal with this situation, you can refer to the following thread:

https://powerusers.microsoft.com/t5/Building-Flows/Multiple-people-picker-values-in-FLOW/td-p/257018

 

Hope this helps.

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

@v-bacao-msft 

 

Thanks for your response does this mean i need to initialise and append a variable for each area?

 

APPEND.JPG

@v-bacao-msft 

 

I've just tried another column and it still doesn't seem to work ??

 

APPEND.JPG

Anonymous
Not applicable

Hello,

 

So the append to array action should be inside of the loop as you determine what you want in the body of the email (the array).

 

What your flow is doing right now is creating the array variable (initializing) with an initial value of null (so it's empty). Then the Append action is taking the empty array variable that you created and adding on to it that same empty array variable. (See the error at the top of your screenshot saying that the issue is self-referencing; it's trying to add itself to itself)

 

In order to get data into the array, the append action needs to be used with the actual data that you want in the array. Notice how in @v-bacao-msft 's example flow above, the "Initialize" action is near the top (since it has to be done at the global level), but the "Append" action is down in the "Apply to Each". Also notice what is being appended (the data being added to the array variable): the data that is wanted to be in the HTML table in the email. 

 

What Barry's flow is doing within the "Apply to each" loop is:

1. Looking at each item in a SharePoint list one at a time

2. Checking to make sure that certain condition(s) is/are met for the current SP item on which the loop is iterating

3. Adding the desired data from the current SP item to the Array variable (which will later become the HTML table in the email).

 

When the conditions are met for an item, data will be added to the array, effectively building your table. When the conditions are not met, nothing will happen and the loop will move on to the next item in the SP list.

 

NOTE: the dynamic content that you put in the Append action block needs to reference only the current item on which the "Apply to each" loop is iterating. Otherwise, if you grab the dynamic content from "Get Items", the flow will automatically put the "Append to Array" action block inside of an "Apply to each" loop since there are multiple items returned in "Get Items" and the dynamic content that you put inside the "Append to Array" can only pull from one item at a time. I'm not sure how Barry's flow in his screenshot didn't automatically create that second "Apply to each" loop, unless he used an expression instead of Dynamic Content. Try it out, and if you run into the issue of that additional "Apply to each" loop being created, let me know and we'll work through creating an expression to reference the desired data.

 

thanks,

Kyle

 

Hi @Kmayes ,

 

@Anonymous has further elaborated on my suggestions, thank you for your help.

 

We need to initialize different variables to store the data we need, and the array variable is used to store the data that needs to be displayed in the HTML table.

 

The String variable is used to append the selected option values in the fields that support multiple selections in a single item so that we can append them to the HTML table.

 

You can take a closer look at the thread I mentioned in my last reply to learn more about ways to deal with similar situations. This helps you understand Data Operations in Flow.

 

Hope that makes sense.

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

@Anonymous 

Hi Kyle

So I have made some changes to the flow created and moved the initialise variable to the top level as mentioned under get items, the flow runs but I'm still facing a small issue which i hope with can be easily ironed out. 🙂

 

Email Issue:

  • Only one e-mail is being sent there are two items that meet the condition and this is being recognised in the condition as it shows true for both records, therefore i moved the e-mail and Create HTML into the Apply To Each  as logically I think it should be there. On doing some testing this morning it will now send an e-mail to just the items selected from the condition.
  • However the value of the HTML is not correct, so suppose what I'm asking is where am i going wrong with getting the output value of that item without the apply to each coming back

dig gang flow.JPG

Anonymous
Not applicable

Hello!

 

If you want an email to be sent for each item that meets the conditions, then you are correct in putting the "Create HTML" and "Send Email" in the "Apply to each" loop.

 

However, unless you clear the contents of the array at the END of the loop (after you send each email), you will continue to add data to the array. For example, when the second item meets the criteria, the array (and, thus, the body of the email) will have both the first and the second items' data.

 

You can use the "Set Variable" Action block to set the array to null. See screenshot.SetVariableNullpng.png

 

Unfortunately, I have next to no knowledge about HTML, so if you are having an issue with the output of the HTML table, I can't speak to that. sorry.

 

Can you provide more details about how "the value of the HTML" is not correct?

 

thanks!

 

@Anonymous 

 

That's good to know at least I'm starting to understand its working method more now 🙂

 

Yes that what I noticed it was collecting the variable for each item it looped round so I've managed to solve that with the suggestion you rightly made.

 

The part im having an issue with only now is getting the correct dynamic content into the table, when adding the content i get three options the value one is the one i need as i just want the selected value from that item, however when i apply this it adds apply to each around my append to variable action?

 1.JPG

Many Thanks

Anonymous
Not applicable

The value of the item probably has multiple fields in it, then.

 

Try putting a Compose action block above the "append to variable" block and see if you can pull what you want via dynamic content.

 

If you can't, then just pass in the "Value" item into the compose and run a test of the flow and get the output of the Compose block from your Run History.

 

You should be able to reference the data that you want to pull using an expression like:

 

items('apply to each loop name')?['desired field name']

 

Let's see what the "Value" of "PPE Not Used" looks like, and it will inform how we write the expression.

 

post a screenshot of that Compose output.

 

thanks,

 

@Anonymous 

 

Yes the value is a multiple selection field sorry i should have said, when i put the value item in compose it creates another apply to each and i then cant reference it in the append to array 😞

 

1.JPG

 

 

Anonymous
Not applicable

Can you paste a screenshot of the output of this action block from a previous run?:

2020-05-22_10-44-49.png

if there is too much text in the box to capture in an image, just copy and paste the text into your reply.

 

Thanks,

Kyle

@Anonymous 

 

Does this help at all?

1.JPG

Anonymous
Not applicable

@Kmayes,

 

Using the screenshot that you provided, if you wanted to return the value of the "NegativeVehicleCondition" field (in this case, "Maintenance Issue") while inside the Apply to each loop, your expression would look like this:

 

items('Apply to each 2')?['NegativeVehicleCondition']?['Value']

 

I hope this helps.

 

Thanks,

Kyle

@Anonymous 

 

Morning,

With the expression where should this be placed in a compose action within the loop or directly into the append to array as i have tried both and get errors ??

Anonymous
Not applicable

@Kmayes,

 

It could be in either, but I can't think of a reason why you wouldn't put it straight into the "Append to Array" action (which should be in the loop).

 

Please keep in mind that the issue could be any number of things. And I (or anyone else potentially willing to help) have no way to know what it is without more information.

 

Any time you encounter an error with which you need assistance, I would suggest you provide screenshots with each of your questions showing what you tried and what the output/error was. The more information you can provide, the easier it will be for someone to answer your question quickly and correctly. Please don't make people ask for screenshots every time you encounter a new error/problem.

 

The users in this community are incredibly willing to help each other by teaching from their experience. But they are not (by and large) here to build people's flows for them. You have to be as willing to learn as they are to teach. Even when you have someone helping you on an issue, as you're working through it, don't stop searching Google and these forums to find information that will help you better understand the situation you're dealing with.

 

 

Thanks,

Kyle

 

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Top Kudoed Authors
Users online (3,658)