cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Kmayes
Post Prodigy
Post Prodigy

Multiple condition issue

I have a flow that i thought would be very easy to create, however i am banging my head against the wall so i'm hoping someone can help with my issue.

My flow currently runs once a day, it then gets the items from a SP list that i have filtered using Odata (to this point it all works fine)

After this point want the flow to run multiple conditions but run through each independently so that the end e-mail can be better customised. So in effect if condition one is met go on to check the next condition...and so on 

 

However when i start adding the send an e-mail action it keeps asking for apply to each again and everything ive tried does not work??

1 ACCEPTED SOLUTION

Accepted Solutions
Anonymous
Not applicable

@Kmayes 

 

ok, so since there are multiple values within "PPENotUsed", you'll need a second Apply to Each loop within the first (lets call it 'Apply to Each 2') so that as you're iterating through each of the List items, you will also iterate through all of the PPENotUsed values for each item. It is inside of this second loop that you'll want to put your append to array action block with an expression like:

 

items('Apply to each 2')?['PPENotUsed']?['Value']

 

it might also be simpler than that, at this point. You might be able to get the value through Dynamic Content, since the item that the second Apply to each loop is iterating through will be the Values of PPENotUsed. So you might be able to pass in "Current Item" to your Append action from the dynamic Content list of Apply to Each 2. Give that a try as well.

 

Hurray for learning!

View solution in original post

26 REPLIES 26
Anonymous
Not applicable

Hello,

 

If you are trying to put Dynamic Content directly from "Get Items" from SP into your email, Power Automate makes you iterate through every item in the list; thus the "Apply to Each" loop.

 

I would suggest initializing a variable(s) and loading whatever custom data you want into the variable(s), then putting the variable(s) in the email.

 

If this doesn't work, please provide some screenshots of your flow to give a better understanding of the situation.

 

thanks,

Kyle

@Anonymous 

Oh ok I think I get what you mean, but may need a bit of guidance as I'm ok with basic flows but not used variables in flows.

 

Below is what i'm currently working with if you need any more info let me know 🙂

 

multiple condition.JPG

 

Hi @Kmayes ,

 

First of all, if it is not necessary to make different actions after every check, then I suggest that you integrate these conditions together to avoid multiple Conditions.

Please check this blog and we could add multiple filters in a Condition.

https://flow.microsoft.com/en-us/blog/build-more-powerful-conditions-in-flows-and-more/

 

Besides, as @Anonymous suggested, if you want to integrate the data in multiple items together and send it via an email, you can refer to the following configuration.

Like:

Spoiler
116.PNG117.PNG

Hope this helps. Feel free to let us know if you have any questions.

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

@v-bacao-msft 

 

Hi I have followed your steps but I still seem to have issues The e-mail part you suggest it tries to wrap it in an apply to each, and the append to array variable, not sure what i have done wrong?

 

So all of my columns are like the following example:

Q1 Yes/ No/ Not Applicable

Q2 (If No to Q1) pick reason why option of about eight answers which can be multiple

 

I really appreciate your support with this issue.

 

1.JPG2.JPG

 

Hi @Kmayes ,

 

Because you reference the output of Get items in the Subject, Apply to each is automatically added.

 

PPE Not Used is a field that supports multiple selections, so when you need to call its field value, Apply to each will also be automatically added so that you can traverse the options contained in the field.

 

If you want to deal with this situation, you can refer to the following thread:

https://powerusers.microsoft.com/t5/Building-Flows/Multiple-people-picker-values-in-FLOW/td-p/257018

 

Hope this helps.

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

@v-bacao-msft 

 

Thanks for your response does this mean i need to initialise and append a variable for each area?

 

APPEND.JPG

@v-bacao-msft 

 

I've just tried another column and it still doesn't seem to work ??

 

APPEND.JPG

Anonymous
Not applicable

Hello,

 

So the append to array action should be inside of the loop as you determine what you want in the body of the email (the array).

 

What your flow is doing right now is creating the array variable (initializing) with an initial value of null (so it's empty). Then the Append action is taking the empty array variable that you created and adding on to it that same empty array variable. (See the error at the top of your screenshot saying that the issue is self-referencing; it's trying to add itself to itself)

 

In order to get data into the array, the append action needs to be used with the actual data that you want in the array. Notice how in @v-bacao-msft 's example flow above, the "Initialize" action is near the top (since it has to be done at the global level), but the "Append" action is down in the "Apply to Each". Also notice what is being appended (the data being added to the array variable): the data that is wanted to be in the HTML table in the email. 

 

What Barry's flow is doing within the "Apply to each" loop is:

1. Looking at each item in a SharePoint list one at a time

2. Checking to make sure that certain condition(s) is/are met for the current SP item on which the loop is iterating

3. Adding the desired data from the current SP item to the Array variable (which will later become the HTML table in the email).

 

When the conditions are met for an item, data will be added to the array, effectively building your table. When the conditions are not met, nothing will happen and the loop will move on to the next item in the SP list.

 

NOTE: the dynamic content that you put in the Append action block needs to reference only the current item on which the "Apply to each" loop is iterating. Otherwise, if you grab the dynamic content from "Get Items", the flow will automatically put the "Append to Array" action block inside of an "Apply to each" loop since there are multiple items returned in "Get Items" and the dynamic content that you put inside the "Append to Array" can only pull from one item at a time. I'm not sure how Barry's flow in his screenshot didn't automatically create that second "Apply to each" loop, unless he used an expression instead of Dynamic Content. Try it out, and if you run into the issue of that additional "Apply to each" loop being created, let me know and we'll work through creating an expression to reference the desired data.

 

thanks,

Kyle

 

Hi @Kmayes ,

 

@Anonymous has further elaborated on my suggestions, thank you for your help.

 

We need to initialize different variables to store the data we need, and the array variable is used to store the data that needs to be displayed in the HTML table.

 

The String variable is used to append the selected option values in the fields that support multiple selections in a single item so that we can append them to the HTML table.

 

You can take a closer look at the thread I mentioned in my last reply to learn more about ways to deal with similar situations. This helps you understand Data Operations in Flow.

 

Hope that makes sense.

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

@Anonymous 

Hi Kyle

So I have made some changes to the flow created and moved the initialise variable to the top level as mentioned under get items, the flow runs but I'm still facing a small issue which i hope with can be easily ironed out. 🙂

 

Email Issue:

  • Only one e-mail is being sent there are two items that meet the condition and this is being recognised in the condition as it shows true for both records, therefore i moved the e-mail and Create HTML into the Apply To Each  as logically I think it should be there. On doing some testing this morning it will now send an e-mail to just the items selected from the condition.
  • However the value of the HTML is not correct, so suppose what I'm asking is where am i going wrong with getting the output value of that item without the apply to each coming back

dig gang flow.JPG

Anonymous
Not applicable

Hello!

 

If you want an email to be sent for each item that meets the conditions, then you are correct in putting the "Create HTML" and "Send Email" in the "Apply to each" loop.

 

However, unless you clear the contents of the array at the END of the loop (after you send each email), you will continue to add data to the array. For example, when the second item meets the criteria, the array (and, thus, the body of the email) will have both the first and the second items' data.

 

You can use the "Set Variable" Action block to set the array to null. See screenshot.SetVariableNullpng.png

 

Unfortunately, I have next to no knowledge about HTML, so if you are having an issue with the output of the HTML table, I can't speak to that. sorry.

 

Can you provide more details about how "the value of the HTML" is not correct?

 

thanks!

 

@Anonymous 

 

That's good to know at least I'm starting to understand its working method more now 🙂

 

Yes that what I noticed it was collecting the variable for each item it looped round so I've managed to solve that with the suggestion you rightly made.

 

The part im having an issue with only now is getting the correct dynamic content into the table, when adding the content i get three options the value one is the one i need as i just want the selected value from that item, however when i apply this it adds apply to each around my append to variable action?

 1.JPG

Many Thanks

Anonymous
Not applicable

The value of the item probably has multiple fields in it, then.

 

Try putting a Compose action block above the "append to variable" block and see if you can pull what you want via dynamic content.

 

If you can't, then just pass in the "Value" item into the compose and run a test of the flow and get the output of the Compose block from your Run History.

 

You should be able to reference the data that you want to pull using an expression like:

 

items('apply to each loop name')?['desired field name']

 

Let's see what the "Value" of "PPE Not Used" looks like, and it will inform how we write the expression.

 

post a screenshot of that Compose output.

 

thanks,

 

@Anonymous 

 

Yes the value is a multiple selection field sorry i should have said, when i put the value item in compose it creates another apply to each and i then cant reference it in the append to array 😞

 

1.JPG

 

 

Anonymous
Not applicable

Can you paste a screenshot of the output of this action block from a previous run?:

2020-05-22_10-44-49.png

if there is too much text in the box to capture in an image, just copy and paste the text into your reply.

 

Thanks,

Kyle

@Anonymous 

 

Does this help at all?

1.JPG

Anonymous
Not applicable

@Kmayes,

 

Using the screenshot that you provided, if you wanted to return the value of the "NegativeVehicleCondition" field (in this case, "Maintenance Issue") while inside the Apply to each loop, your expression would look like this:

 

items('Apply to each 2')?['NegativeVehicleCondition']?['Value']

 

I hope this helps.

 

Thanks,

Kyle

@Anonymous 

 

Morning,

With the expression where should this be placed in a compose action within the loop or directly into the append to array as i have tried both and get errors ??

Anonymous
Not applicable

@Kmayes,

 

It could be in either, but I can't think of a reason why you wouldn't put it straight into the "Append to Array" action (which should be in the loop).

 

Please keep in mind that the issue could be any number of things. And I (or anyone else potentially willing to help) have no way to know what it is without more information.

 

Any time you encounter an error with which you need assistance, I would suggest you provide screenshots with each of your questions showing what you tried and what the output/error was. The more information you can provide, the easier it will be for someone to answer your question quickly and correctly. Please don't make people ask for screenshots every time you encounter a new error/problem.

 

The users in this community are incredibly willing to help each other by teaching from their experience. But they are not (by and large) here to build people's flows for them. You have to be as willing to learn as they are to teach. Even when you have someone helping you on an issue, as you're working through it, don't stop searching Google and these forums to find information that will help you better understand the situation you're dealing with.

 

 

Thanks,

Kyle

 

Helpful resources

Announcements

Tuesday Tip: Getting Started with Private Messages & Macros

Welcome to TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   This Week's Tip: Private Messaging & Macros in Power Apps Community   Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member!   Our Knowledge Base article about private messaging and macros is the best place to find out more. Check it out today and discover some key tips and tricks when it comes to messages and macros:   Private Messaging: Learn how to enable private messages in your community profile and ensure you’re connected with other community membersMacros Explained: Discover the convenience of macros—prewritten text snippets that save time when posting in forums or sending private messagesCreating Macros: Follow simple steps to create your own macros for efficient communication within the Power Apps CommunityUsage Guide: Understand how to apply macros in posts and private messages, enhancing your interaction with the Community For detailed instructions and more information, visit the full page in your community today:Power Apps: Enabling Private Messaging & How to Use Macros (Power Apps)Power Automate: Enabling Private Messaging & How to Use Macros (Power Automate)  Copilot Studio: Enabling Private Messaging &How to Use Macros (Copilot Studio) Power Pages: Enabling Private Messaging & How to Use Macros (Power Pages)

Tuesday Tip: Subscriptions & Notifications

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week: All About Subscriptions & Notifications We don't want you to a miss a thing in the Community! The best way to make sure you know what's going on in the News & Announcements, to blogs you follow, or forums and galleries you're interested in is to subscribe! These subscriptions ensure you receive automated messages about the most recent posts and replies. Even better, there are multiple ways you can subscribe to content and boards in the community! (Please note: if you have created an AAD (Azure Active Directory) account you won't be able to receive e-mail notifications.)   Subscribing to a Category  When you're looking at the entire category, select from the Options drop down and choose Subscribe.     You can then choose to Subscribe to all of the boards or select only the boards you want to receive notifications. When you're satisfied with your choices, click Save.     Subscribing to a Topic You can also subscribe to a single topic by clicking Subscribe from the Options drop down menu, while you are viewing the topic or in the General board overview, respectively.     Subscribing to a Label Find the labels at the bottom left of a post.From a particular post with a label, click on the label to filter by that label. This opens a window containing a list of posts with the label you have selected. Click Subscribe.     Note: You can only subscribe to a label at the board level. If you subscribe to a label named 'Copilot' at board #1, it will not automatically subscribe you to an identically named label at board #2. You will have to subscribe twice, once at each board.   Bookmarks Just like you can subscribe to topics and categories, you can also bookmark topics and boards from the same menus! Simply go to the Topic Options drop down menu to bookmark a topic or the Options drop down to bookmark a board. The difference between subscribing and bookmarking is that subscriptions provide you with notifications, whereas bookmarks provide you a static way of easily accessing your favorite boards from the My subscriptions area.   Managing & Viewing Your Subscriptions & Bookmarks To manage your subscriptions, click on your avatar and select My subscriptions from the drop-down menu.     From the Subscriptions & Notifications tab, you can manage your subscriptions, including your e-mail subscription options, your bookmarks, your notification settings, and your email notification format.     You can see a list of all your subscriptions and bookmarks and choose which ones to delete, either individually or in bulk, by checking multiple boxes.     A Note on Following Friends on Mobile Adding someone as a friend or selecting Follow in the mobile view does not allow you to subscribe to their activity feed. You will merely be able to see your friends’ biography, other personal information, or online status, and send messages more quickly by choosing who to send the message to from a list, as opposed to having to search by username.

Monthly Community User Group Update | April 2024

The monthly Community User Group Update is your resource for discovering User Group meetings and events happening around the world (and virtually), welcoming new User Groups to our Community, and more! Our amazing Community User Groups are an important part of the Power Platform Community, with more than 700 Community User Groups worldwide, we know they're a great way to engage personally, while giving our members a place to learn and grow together.   This month, we welcome 3 new User Groups in India, Wales, and Germany, and feature 8 User Group Events across Power Platform and Dynamics 365. Find out more below. New Power Platform User Groups   Power Platform Innovators (India) About: Our aim is to foster a collaborative environment where we can share upcoming Power Platform events, best practices, and valuable content related to Power Platform. Whether you’re a seasoned expert or a newcomer looking to learn, this group is for you. Let’s empower each other to achieve more with Power Platform. Join us in shaping the future of digital transformation!   Power Platform User Group (Wales) About: A Power Platform User Group in Wales (predominantly based in Cardiff but will look to hold sessions around Wales) to establish a community to share learnings and experience in all parts of the platform.   Power Platform User Group (Hannover) About: This group is for anyone who works with the services of Microsoft Power Platform or wants to learn more about it and no-code/low-code. And, of course, Microsoft Copilot application in the Power Platform.   New Dynamics365 User Groups   Ellucian CRM Recruit UK (United Kingdom) About: A group for United Kingdom universities using Ellucian CRM Recruit to manage their admissions process, to share good practice and resolve issues.    Business Central Mexico (Mexico City) About:  A place to find documentation, learning resources, and events focused on user needs in Mexico. We meet to discuss and answer questions about the current features in the standard localization that Microsoft provides, and what you only find in third-party locations. In addition, we focus on what's planned for new standard versions, recent legislation requirements, and more. Let's work together to drive request votes for Microsoft for features that aren't currently found—but are indispensable.   Dynamics 365 F&O User Group (Dublin) About: The Dynamics 365 F&O User Group - Ireland Chapter meets up in person at least twice yearly in One Microsoft Place Dublin for users to have the opportunity to have conversations on mutual topics, find out what’s new and on the Dynamics 365 FinOps Product Roadmap, get insights from customer and partner experiences, and access to Microsoft subject matter expertise.  Upcoming Power Platform Events    PAK Time (Power Apps Kwentuhan) 2024 #6 (Phillipines, Online) This is a continuation session of Custom API. Sir Jun Miano will be sharing firsthand experience on setting up custom API and best practices. (April 6, 2024)       Power Apps: Creating business applications rapidly (Sydney) At this event, learn how to choose the right app on Power Platform, creating a business application in an hour, and tips for using Copilot AI. While we recommend attending all 6 events in the series, each session is independent of one another, and you can join the topics of your interest. Think of it as a “Hop On, Hop Off” bus! Participation is free, but you need a personal computer (laptop) and we provide the rest. We look forward to seeing you there! (April 11, 2024)     April 2024 Cleveland Power Platform User Group (Independence, Ohio) Kickoff the meeting with networking, and then our speaker will share how to create responsive and intuitive Canvas Apps using features like Variables, Search and Filtering. And how PowerFx rich functions and expressions makes configuring those functionalities easier. Bring ideas to discuss and engage with other community members! (April 16, 2024)     Dynamics 365 and Power Platform 2024 Wave 1 Release (NYC, Online) This session features Aric Levin, Microsoft Business Applications MVP and Technical Architect at Avanade and Mihir Shah, Global CoC Leader of Microsoft Managed Services at IBM. We will cover some of the new features and enhancements related to the Power Platform, Dataverse, Maker Portal, Unified Interface and the Microsoft First Party Apps (Microsoft Dynamics 365) that were announced in the Microsoft Dynamics 365 and Power Platform 2024 Release Wave 1 Plan. (April 17, 2024)     Let’s Explore Copilot Studio Series: Bot Skills to Extend Your Copilots (Makati National Capital Reg... Join us for the second installment of our Let's Explore Copilot Studio Series, focusing on Bot Skills. Learn how to enhance your copilot's abilities to automate tasks within specific topics, from booking appointments to sending emails and managing tasks. Discover the power of Skills in expanding conversational capabilities. (April 30, 2024)   Upcoming Dynamics365 Events    Leveraging Customer Managed Keys (CMK) in Dynamics 365 (Noida, Uttar Pradesh, Online) This month's featured topic: Leveraging Customer Managed Keys (CMK) in Dynamics 365, with special guest Nitin Jain from Microsoft. We are excited and thankful to him for doing this session. Join us for this online session, which should be helpful to all Dynamics 365 developers, Technical Architects and Enterprise architects who are implementing Dynamics 365 and want to have more control on the security of their data over Microsoft Managed Keys. (April 11, 2024)       Stockholm D365 User Group April Meeting (Stockholm) This is a Swedish user group for D365 Finance and Operations, AX2012, CRM, CE, Project Operations, and Power BI.  (April 17, 2024)         Transportation Management in D365 F&SCM Q&A Session (Toronto, Online) Calling all Toronto UG members and beyond! Join us for an engaging and informative one-hour Q&A session, exclusively focused on Transportation Management System (TMS) within Dynamics 365 F&SCM. Whether you’re a seasoned professional or just curious about TMS, this event is for you. Bring your questions! (April 26, 2024)   Leaders, Create Your Events!    Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you. Just leave a comment or send a PM here in the Community!

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

We have closed kudos on this post at this time. Thank you to everyone who kudo'ed their RSVP--your invitations are coming soon!  Miss the window to RSVP? Don't worry--you can catch the recording of the meeting this week in the Community.  Details coming soon!   *****   It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Blogging in the Community is a Great Way to Start

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Topic: Blogging in the Community Are you new to our Communities and feel like you may know a few things to share, but you're not quite ready to start answering questions in the forums? A great place to start is the Community blog! Whether you've been using Power Platform for awhile, or you're new to the low-code revolution, the Community blog is a place for anyone who can write, has some great insight to share, and is willing to commit to posting regularly! In other words, we want YOU to join the Community blog.    Why should you consider becoming a blog author? Here are just a few great reasons. 🎉   Learn from Each Other: Our community is like a bustling marketplace of ideas. By sharing your experiences and insights, you contribute to a dynamic ecosystem where makers learn from one another. Your unique perspective matters! Collaborate and Innovate: Imagine a virtual brainstorming session where minds collide, ideas spark, and solutions emerge. That’s what our community blog offers—a platform for collaboration and innovation. Together, we can build something extraordinary. Showcase the Power of Low-Code: You know that feeling when you discover a hidden gem? By writing about your experience with your favorite Power Platform tool, you’re shining a spotlight on its capabilities and real-world applications. It’s like saying, “Hey world, check out this amazing tool!” Earn Trust and Credibility: When you share valuable information, you become a trusted resource. Your fellow community members rely on your tips, tricks, and know-how. It’s like being the go-to friend who always has the best recommendations. Empower Others: By contributing to our community blog, you empower others to level up their skills. Whether it’s a nifty workaround, a time-saving hack, or an aha moment, your words have impact. So grab your keyboard, brew your favorite beverage, and start writing! Your insights matter and your voice counts! With every blog shared in the Community, we all do a better job of tackling complex challenges with gusto. 🚀 Welcome aboard, future blog author! ✍️💻🌟 Get started blogging across the Power Platform Communities today! Just follow one of the links below to begin your blogging adventure.   Power Apps: https://powerusers.microsoft.com/t5/Power-Apps-Community-Blog/bg-p/PowerAppsBlog Power Automate: https://powerusers.microsoft.com/t5/Power-Automate-Community-Blog/bg-p/MPABlog Copilot Studio: https://powerusers.microsoft.com/t5/Copilot-Studio-Community-Blog/bg-p/PVACommunityBlog Power Pages: https://powerusers.microsoft.com/t5/Power-Pages-Community-Blog/bg-p/mpp_blog   When you follow the link, look for the Message Admins button like this on the page's right rail, and let us know you're interested. We can't wait to connect with you and help you get started. Thanks for being part of our incredible community--and thanks for becoming part of the community blog!

Launch Event Registration: Redefine What's Possible Using AI

  Join Microsoft product leaders and engineers for an in-depth look at the latest features in Microsoft Dynamics 365 and Microsoft Power Platform. Learn how advances in AI and Microsoft Copilot can help you connect teams, processes, and data, and respond to changing business needs with greater agility. We’ll share insights and demonstrate how 2024 release wave 1 updates and advancements will help you:   Streamline business processes, automate repetitive tasks, and unlock creativity using the power of Copilot and role-specific insights and actions. Unify customer data to optimize customer journeys with generative AI and foster collaboration between sales and marketing teams. Strengthen governance with upgraded tools and features. Accelerate low-code development  using natural language and streamlined tools. Plus, you can get answers to your questions during our live Q&A chat! Don't wait--register today by clicking the image below!      

Users online (4,435)