Request Operation is Invalid. The $top expression "Infinity" is not valid

[dhock]

Although there is an earlier thread on this topic that is marked as resolved, this issue is not resolved for many of us, as creating an entry in the list so that there is at least one did not make the error go away. I have a screen with 3 galleries, each connected to a different SharePoint list from the same site. Depending on who is accessing the app (comparing Lower(User().Email) to a collection of emails), I am filtering the list to display only the most recent 50 entries in the gallery, or only the most recent 50 created by that user. I'm using the same filter on each gallery (though obviously for the corresponding list). When accessing as someone who is allowed (just within the app, no special permissions in SharePoint) to see all of the most recent 50 entries, the error does not come up. But if I access as one of the people whose email is in the collection, I get an error when I click on an item in either of 2 galleries but not in the 3rd gallery. I also get an error when just going to a new form (no item selected) for those two lists from buttons. All the related lists have entries. Of the two that throw the error, one has an item created by that user and the other doesn't (so one gallery has one item and the other doesn't).

[bemvilac_brito]

@leyburn19  Mine error appears with 2 records in SP List. So I could bet my soul that is have nothing to do with delegation issues. 

[dhock]

@leyburn19 , my limit is still set to 500 (never increased) and I'm getting the error.

[Anonymous]

Same Error here on multiple apps. It seems to happen on ClearCollect more often then not.

[dhock]

@v-xida-msft , thanks for your reply. I have 3 galleries with filters but they are all similar, just using a different SharePoint list as a datasource. They look like this:

FirstN(Sort(Filter('Ma3an Meeting Minutes', Lower('Created By'.Email) = Lower(User().Email) && !('Approval Status'.Value = "Approved")), Created,Descending), 50)

I did try creating a collection for one of them, but I used the same filter on the list to create the collection and then set the gallery Items property to the collection. I still got the error after that. I don't currently have more than 500 items in any one list but I anticipate that I will at some point. Interestingly, though all 3 galleries use essentially the same filter, only accessing 2 of the related forms give the error (whether by selecting an item in the galleries or using a button that goes to a form with no item selected, i.e., newform of list).

Thank you also for the link to create a ticket.

[Anonymous]

This is a runtime error as well

Here is a copy of my OnVisible

ClearCollect(_DataCounts,
{ID:4,DC:CountIf(col_ActiveParcels,_FileNumber = 'Own.FileNumber')},
{ID:5,DC:CountIf(Parcel_LandUse,_FileNumber = 'LandUse.FileNumber')},
{ID:6,DC:CountIf(Parcel_Utilities,_FileNumber = 'Util.FileNumber')},
{ID:7,DC:CountIf(Parcel_Zoning,_FileNumber = 'Zoning.FileNumber')},
{ID:8,DC:CountIf(File_Notes,_FileNumber = NoteFileNumber)},
{ID:9,DC:CountIf(File_Attachments,_FileNumber = AttachFileNumber)},
{ID:11,DC:CountIf(Parcel_Improvements,_FileNumber = ImprovementFileNumber)});
Concurrent(
ClearCollect(
col_ActiveFile,
First(Filter(col_LandFiles,'File.FileNumber' = _FileNumber))),
ClearCollect(col_ActiveParcels,Filter(col_LandParcels,'Own.FileNumber' = _FileNumber)))
Infinity Error

Code behind _DataCounts

Switch(TableID,
3,_FileNumber,
4,First(Filter(_DataCounts,ID = TableID)).DC,
5,First(Filter(_DataCounts,ID = TableID)).DC,
6,First(Filter(_DataCounts,ID = TableID)).DC,
7,First(Filter(_DataCounts,ID = TableID)).DC,
8,First(Filter(_DataCounts,ID = TableID)).DC,
9,First(Filter(_DataCounts,ID = TableID)).DC,
11,First(Filter(_DataCounts,ID = TableID)).DC)

Other galleries are one to one with collection

[StevenF19]

Yeah this error has broken a critical app for us and we've had to rollback to a previous version which has delayed some new features that we implemented. Hoping this gets fixed ASAP.

[Anonymous]

This doesn't work for me. Keep giving error with the collection!!

---

@v-xida-msft wrote:

Hi @dhock ,

Could you please share more details about the Filter you used within your Gallery control?

Based on the issue that you mentioned, I have made a test on my side, and don't have the issue that you mentioned. Have you taken a try to save your SP List records into a Collection, and use the Collection as data source within your app?

On your side, please consider save your SP List records into a Collection, then use the Collection as data source in your app instead of the Original SP List data source.

Set the OnStart property of the App control to following:

ClearCollect(RecordsCollection, 'YourSPList')

then set the Items property of the Gallery to following:

RecordsCollection

If the issue still exists, please consider remove the SP list connection from your app, then re-create a new one from your app, then try above solution, check if the issue is solved.

Please also consider submit an assisted support ticket for further help through the following link:

https://powerapps.microsoft.com/en-us/support/pro

Best regards,

---

---

@v-xida-msft wrote:

Hi @dhock ,

Could you please share more details about the Filter you used within your Gallery control?

Based on the issue that you mentioned, I have made a test on my side, and don't have the issue that you mentioned. Have you taken a try to save your SP List records into a Collection, and use the Collection as data source within your app?

On your side, please consider save your SP List records into a Collection, then use the Collection as data source in your app instead of the Original SP List data source.

Set the OnStart property of the App control to following:

ClearCollect(RecordsCollection, 'YourSPList')

then set the Items property of the Gallery to following:

RecordsCollection

If the issue still exists, please consider remove the SP list connection from your app, then re-create a new one from your app, then try above solution, check if the issue is solved.

Please also consider submit an assisted support ticket for further help through the following link:

https://powerapps.microsoft.com/en-us/support/pro

Best regards,

---

---

@v-xida-msft wrote:

Hi @dhock ,

Could you please share more details about the Filter you used within your Gallery control?

Based on the issue that you mentioned, I have made a test on my side, and don't have the issue that you mentioned. Have you taken a try to save your SP List records into a Collection, and use the Collection as data source within your app?

On your side, please consider save your SP List records into a Collection, then use the Collection as data source in your app instead of the Original SP List data source.

Set the OnStart property of the App control to following:

ClearCollect(RecordsCollection, 'YourSPList')

then set the Items property of the Gallery to following:

RecordsCollection

If the issue still exists, please consider remove the SP list connection from your app, then re-create a new one from your app, then try above solution, check if the issue is solved.

Please also consider submit an assisted support ticket for further help through the following link:

https://powerapps.microsoft.com/en-us/support/pro

Best regards,

---

[Anonymous]

Absolutely no changes made to my apps.  I'm getting reports of this error as of this morning.

[leyburn19]

Change my mind,  it is back for me.  Went away for a while so it is not what I thought.  Is anyone from MS doing anything?

[Anonymous]

It happened to me yesterday too.  I cleared out my lists getting ready for an internal demo and BAM.  I cried for a few hours yesterday.

Tyler