cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
TetumTede
Frequent Visitor

Adding users to a SharePoint Group

I'm playing around with flow and its interactions with SharePoint groups as we may introduce it to help people deal with adding and removing people from groups in their SharePoint sites. I've managed the removing people from a group however adding people is causing a bit more of an issue, so far I've got thus farCapture.PNG.

 

 

 

 

 

 

 

 

 

This is based off the answer to a question found here (I've tried others but have they have failed as well)

the response I get is this:

{"status":400,"message":"Invalid JSON. A token was not recognized in the JSON content.\r\nclientRequestId: a17802ed-7bcb-442d-9609-fb377ff7c64a\r\nserviceRequestId: cb65ea9e-2063-8000-cb92-ffd9b8e51734","source":"https://"MYDOMAIN".sharepoint.com/sites/ITServices/_api/web/SiteGroups/GetById(911)/Users","errors":["-1","Microsoft.SharePoint.Client.InvalidClientQueryException"]}

 

Any help would be appreciated thanks!

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
RezaDorrani
Community Champion
Community Champion

Hi @TetumTede 

 

This is what worked for me

 

Capture.PNG

 

Ensure your group id is correct in  SharePoint

 

For LoginName you have to add i:0#.f|membership| before login name

 

Also check the JSON quotes - try being consistent - all single quotes

 

Regards,

Reza Dorrani

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly

 

 

View solution in original post

8 REPLIES 8
RezaDorrani
Community Champion
Community Champion

Hi @TetumTede 

 

This is what worked for me

 

Capture.PNG

 

Ensure your group id is correct in  SharePoint

 

For LoginName you have to add i:0#.f|membership| before login name

 

Also check the JSON quotes - try being consistent - all single quotes

 

Regards,

Reza Dorrani

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly

 

 

The above step worked for single user. is it possible to add multiple users in a group using flow? if so, could you please share the syntax?

Hi @mhussain18

Sorry for the delay I've been on holiday;

 

I don't know for certain how to do that, but my guess is putting the email addresses of the people you wan't to add in an array let's say "People", then use a for each item in "People" to iterate through the array doing the above as suggested by RezaDorrani.

 

Hope that helps you to get started

When someone posts the solution (that is smart and useful, btw), wouldn't be logic to post the text so one can copy/paste it instead of having to type it?

Anonymous
Not applicable

I am getting the same result as the original question in this post.  Here is what I am doing:

 

AddUserToGroup.png

I have verified that the Site Address and URI are both fully functioning.  The error result is this:

"BadRequest."

Invalid JSON. The property name '' is not valid. The name of a property cannot be empty.
clientRequestId: f6aec2b4-822d-4a6e-90e9-f4aa0162d182
serviceRequestId: b499689f-e0a8-0000-6122-5f43f6ec0327

 

To be easier to read here is what I have for the Headers:

{
"accept": "application/json;odata=verbose",
"content-type": "application/json;odata=verbose"
}

 

and the Body:

{
'_metadata':{'type':'SP.User'},
‘LoginName’:’i:0#.f|membership|user@contoso.com’}

 

where "user" and "contoso" are real userid and company name respectively.

 

The outputs are as follows:

Headers -

Pragma                                                                                         no-cache
x-ms-request-id                                                                           b499689f-e0a8-0000-6122-5f43f6ec0327
Strict-Transport-Security                                                             max-age=31536000; includeSubDomains
X-Content-Type-Options                                                            nosniff
X-Frame-Options                                                                        DENY
Timing-Allow-Origin                                                                   *
x-ms-apihub-cached-response                                                   true
Cache-Control                                                                            no-store, no-cache
Date                                                                                           Wed, 22 Jul 2020 16:49:52 GMT
Set-Cookie                           ARRAffinity=794ef11ee2e3a090db5d7dd8384faeb8d6b242b69c163737874eea85e94455e8;Path=/;HttpOnly;Domain=sharepointonline-wus.azconn-wus.p.azurewebsites.net
Content-Length                                                                         457
Content-Type                                                                            application/json
Expires 

 

Body

{
"status": 400,
"message": "Invalid JSON. The property name '' is not valid. The name of a property cannot be empty.\r\nclientRequestId: f6aec2b4-822d-4a6e-90e9-f4aa0162d182\r\nserviceRequestId: b499689f-e0a8-0000-6122-5f43f6ec0327",
"source": "https://contoso.sharepoint.com/sites/planning-test/_api/web/SiteGroups/GetById(37)/Users",
"errors": [
"-1",
"Microsoft.SharePoint.Client.InvalidClientQueryException"
]
}                                                                                  -1

 

I hope someone can help me understand why I am getting the blank property name or basically why this is not writing the user's email address into my SharePoint Group.

 

Thanks,

@Anonymous: It is two (2) underscores before "metadata" in the body. Looks like you only have one. Also, make sure those are all straight (normal) quotes instead of curly quotes. Looks like the ones on the line for LoginName are curly (a whole different character to the computer).

Hi @RezaDorrani 

 

there are some emails which contains single quotes like (xyz'abc@domain), for those particular emails this action action card is giving error of invalid JSON.

@RezaDorrani Reza, how would you adapt this to initiate the user add from a button in PowerApps. So, basically, user hits a button and is added to an SP list.

Helpful resources

Announcements

Check out the Copilot Studio Cookbook today!

We are excited to announce our new Copilot Cookbook Gallery in the Copilot Studio Community. We can't wait for you to share your expertise and your experience!    Join us for an amazing opportunity where you'll be one of the first to contribute to the Copilot Cookbook—your ultimate guide to mastering Microsoft Copilot. Whether you're seeking inspiration or grappling with a challenge while crafting apps, you probably already know that Copilot Cookbook is your reliable assistant, offering a wealth of tips and tricks at your fingertips--and we want you to add your expertise. What can you "cook" up?   Click this link to get started: https://aka.ms/CS_Copilot_Cookbook_Gallery   Don't miss out on this exclusive opportunity to be one of the first in the Community to share your app creation journey with Copilot. We'll be announcing a Cookbook Challenge very soon and want to make sure you one of the first "cooks" in the kitchen.   Don't miss your moment--start submitting in the Copilot Cookbook Gallery today!     Thank you,  Engagement Team

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Check Out the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community.  We can't wait to see what you "cook" up!    

Welcome to the Power Automate Community

You are now a part of a fast-growing vibrant group of peers and industry experts who are here to network, share knowledge, and even have a little fun.   Now that you are a member, you can enjoy the following resources:   Welcome to the Community   News & Announcements: The is your place to get all the latest news around community events and announcements. This is where we share with the community what is going on and how to participate.  Be sure to subscribe to this board and not miss an announcement.   Get Help with Power Automate Forums: If you're looking for support with any part of Power Automate, our forums are the place to go. From General Power Automate forums to Using Connectors, Building Flows and Using Flows.  You will find thousands of technical professionals, and Super Users with years of experience who are ready and eager to answer your questions. You now have the ability to post, reply and give "kudos" on the Power Automate community forums. Make sure you conduct a quick search before creating a new post because your question may have already been asked and answered. Galleries: The galleries are full of content and can assist you with information on creating a flow in our Webinars and Video Gallery, and the ability to share the flows you have created in the Power Automate Cookbook.  Stay connected with the Community Connections & How-To Videos from the Microsoft Community Team. Check out the awesome content being shared there today.   Power Automate Community Blog: Over the years, more than 700 Power Automate Community Blog articles have been written and published by our thriving community. Our community members have learned some excellent tips and have keen insights on the future of process automation. In the Power Automate Community Blog, you can read the latest Power Automate-related posts from our community blog authors around the world. Let us know if you'd like to become an author and contribute your own writing — everything Power Automate-related is welcome.   Community Support: Check out and learn more about Using the Community for tips & tricks. Let us know in the Community Feedback  board if you have any questions or comments about your community experience. Again, we are so excited to welcome you to the Microsoft Power Automate community family. Whether you are brand new to the world of process automation or you are a seasoned Power Automate veteran - our goal is to shape the community to be your 'go to' for support, networking, education, inspiration and encouragement as we enjoy this adventure together.     Power Automate Community Team

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Users online (3,341)