I am querying a SharePoint List and using the Create CSV Table action to generate a CSV file.
However I want the file to be pipe("|") separated.
Is there a way to change the delimiter when creating a CSV file. I would greatly appreciate any advise on this.
Solved! Go to Solution.
If you intend to do this with the data contained in a SharePoint List, you could :
1) Get your elements with the SP connector;
2) Initialize a string variable with the columns names you would like, e.g. "name;surname;email" and by hitting enter to add a carriage return;
3) Use "Apply to each" on the value element returned by the SP Get elements block;
4) In the apply to each loop, use an "Add to string variable", where the content would be the dynamic fields extracted from SP, separated with ";" and with a carriage return at the end of the line (hit enter)
Then you can add your string variable as the content of an attachment for instance.
Hope this helps !
Hi @Admin_A
thank for your reply.
I had taken a similar route in order to reach the same destination.
I'm creating the CSV table as intended by MS Flow, but I'm using 'custom columns'.
On each header/column I'm adding some special characters (note that these are also forbidden in the SP list, via column validation).
Note the pipes encapsulating the content (everywhere except the line jump, since I'm using the default carriage returns on the CSV).
My aim was to create an easily replaceable set of characters (in my case, pipe-comma-pipe) I could look for, and then replace it as a whole for the character I need to be used as separator.
So next step is a compose action with a replace expression for the 'character set' I created.
I look for |,| and then replace it with my desired separator.
I also didn't needed to take the carriage retun into account since I'm using the default ones created for each line on the CSV.
I hope thi can help someone 🙂
Hi @Anonymous,
By default, a comma is used to separate the items. If you want the file to be pipe separated, you could use a replace function to replace the comma with a pipe.
Under the Create CSV table, add a Compose action, and use the following code:
replace(body('Create_CSV_table'),',','|')
Then in the email body, select the output from the Compose action.
Please have a try with it on your side.
Best regards,
Mabel Mao
HI Mabel,
Thank you for the reply but the solution proposed by you will also replace any comma in the input file with a pipe ('|').
I just want the separator to be changed from comma to pipe while keeping the "commas" elsewhere intact.
Any updates on this topic?
This is 2 years old and a pretty basic feature.
Has anyone come up with a working solution that doesn't reaplace all particular characters in the CSV but only the delimiter/separator?
Thanks in advance for your help,
Best regards
I am also looking for a solution for this. Any update?
I was kindly pointed to some potential workaround in a similar thread:
Hope this helps @Anonymous
If you intend to do this with the data contained in a SharePoint List, you could :
1) Get your elements with the SP connector;
2) Initialize a string variable with the columns names you would like, e.g. "name;surname;email" and by hitting enter to add a carriage return;
3) Use "Apply to each" on the value element returned by the SP Get elements block;
4) In the apply to each loop, use an "Add to string variable", where the content would be the dynamic fields extracted from SP, separated with ";" and with a carriage return at the end of the line (hit enter)
Then you can add your string variable as the content of an attachment for instance.
Hope this helps !
Hi @Admin_A
thank for your reply.
I had taken a similar route in order to reach the same destination.
I'm creating the CSV table as intended by MS Flow, but I'm using 'custom columns'.
On each header/column I'm adding some special characters (note that these are also forbidden in the SP list, via column validation).
Note the pipes encapsulating the content (everywhere except the line jump, since I'm using the default carriage returns on the CSV).
My aim was to create an easily replaceable set of characters (in my case, pipe-comma-pipe) I could look for, and then replace it as a whole for the character I need to be used as separator.
So next step is a compose action with a replace expression for the 'character set' I created.
I look for |,| and then replace it with my desired separator.
I also didn't needed to take the carriage retun into account since I'm using the default ones created for each line on the CSV.
I hope thi can help someone 🙂
Thanks, this was very helpful. We did almost the same thing, although for some reason, a single replace statement looking for |,| did not clean all the records. Where we had comment fields with commas internally, we needed two more replace statements. We also switched to the ^ symbol, since some of our comment fields also contained pipes! So our three replace/compose statements after the create csv table action were:
Hello All,
I ran into similar issues when pulling CSV data in from Power Automate Desktop with commas in the actual data. I wanted to change the delimiter so I could more easily parse the data without commas in the actual data messing things up.
Here's a link to the scope/flow I built so anyone can easily select their CSV data, enter a new delimiter, and get the new delimiter separated data from the final compose action without the usual errors. The file data just needs to have double quotes around any of the records with commas in them or be converted to a text file that automatically applies quotes to those records.
https://powerusers.microsoft.com/t5/Power-Automate-Cookbook/Change-CSV-File-Data-delimiter/m-p/14429...
Hello all!
I'm exporting a CSV from a paginated Report and I need to replace the comma delimiter to ~. I tried with a compose formula replacing the , with the ~ but I have some data with , and I don't want to replace those.
Any ideas or solutions about it?
Thanks
You can try my template for changing the CSV delimiter here:
It’s set to work even if there are commas in the data. You may have to copy the rest of your flow into the template flow though, as expressions in the template scope are often messed up when you try to copy it into an existing flow.
I could figure it out by changing the commas of the columns for another symbol in my query. Then, with a step of my flow, change the delimiters, and then with other step in the flow change to commas the symbol that I put with the query
Thanks!
It is feasible workaround, when create files with a limited number of columns. When creating multiple flow with more than 100 columns, it become very time consuming.
Is it possible to create these flows directly in a Jason format? It is two time-consuming with all these clicks and wait.
Oh my God! This is so brilliant! I cannot isolate the real commas in the text from the commas made by CSV table. And this! This is such a blessing that saves me from recoding my excel script. I am creating a CSV to excel with my pre-defined xlsx template and I need a delimiter that is very unique to recognize when to put a text on the next column. It's a big problem when the sentence has it's own comma that was created by the user, it tends to separate the texts after a comma. It's been a my problem for a year now. Here is my final table. Thanks a lot for this! Cheers to you!
Hey @DEVREYES ,
I'm glad this post is stil helpful after all this time 🙂
Good luck with your flows,
Cheers!
Thank you very much. I'm always amazed after hours of going down various complicated rabbit holes only to find a simple solution like yours that works!
I attempted this way. I got seperated columns (finally) but there's the extra column with ",". Is there a way to fix this or go around it?
Hi @Anonymous ,
could you show the csv in plain text? like on notepad++ or something?
I'm not sure where that extra column may be coming from. It seems you may have an extra set of separators somewhere.
Also, please expand the 'create table' and the 'compose' steps to take a better look and try to assist you.
Cheers 🙂
@nihkel This is a good solution, but there is 1 flaw that needs to be handled 🙂
If any cells have "," in it, fx. 3,000.00 that cell will be formatted like "3,000.00" by PowerAutomate.
So the csv file will end up looking like this - notice the CreditLimits with ""
ID,Name,CreditLimit,Status
1,John Doe,"3,000.50",Active
2,Serena Young,"1,000.00",Active
3,Henry Ford,500.00,Inactive
From a pseudo point of view, the Create CSV file action will format the file like this, if following your solution:
ID|,|Name|,|CreditLimit|,|Status
Above will result in a file looking like this - notice the CreditLimit will surround the cell value in " ", which will cause the | to be within the " "
ID|,|Name|,|CreditLimit|,|Status
1|,|John Doe|,"|3,000.50|",|Active
2|,|Serena Young|,"|1,000.00|",|Active
3|,|Henry Ford|,|500.00|,|Inactive
We then apply your solution, which will replace all |,| with ; - will have the file looking like this.
ID;Name;CreditLimit;Status
1;John Doe|,"|3,000.50|",|Active
2;Serena Young|,"|1,000.00|",|Active
3;Henry Ford;500.00;Inactive
That will replace all |,| with ; - but it will not handle the scenario where a , is in a cell value.
So what needs to be done, is to replace all 3 cases that's happening (insert csv instead of 'triggerBody')
|,|
replace(triggerBody()['text'],'|,|','')
ID;Name;CreditLimit;Status
1;John Doe|,"|3,000.50|",|Active
2;Serena Young|,"|1,000.00|",|Active
3;Henry Ford;500.00;Inactive
,|
replace(triggerBody()['text'],'|,','')
ID;Name;CreditLimit;Status
1;John Doe|,"|3,000.50|";Active
2;Serena Young|,"|1,000.00|";Active
3;Henry Ford;500.00;Inactive
|,
replace(triggerBody()['text'],',|','')
ID;Name;CreditLimit;Status
1;John Doe;"|3,000.50|";Active
2;Serena Young;"|1,000.00|";Active
3;Henry Ford;500.00;Inactive
That will have the file looking like this:
ID;Name;CreditLimit;Status
1;John Doe;"|3,000.50|";Active
2;Serena Young;"|1,000.00|";Active
3;Henry Ford;500.00;Inactive
So last step would be to remove the remaining pipes |
replace(triggerBody()['text'],'|','')
...which will have the file looking like this:
ID;Name;CreditLimit;Status
1;John Doe;"3,000.50";Active
2;Serena Young;"1,000.00";Active
3;Henry Ford;500.00;Inactive
All above 4 replaces can be nested into 1
replace(replace(replace(replace(triggerBody()['text'],'|,|',''),'|,',''),',|',''))
Really props to you @nihkel for coming up with the idea, I just put the last puzzle pieces together 👍
Home more people can benefit from this.
I'll be more than happy to explain in deeper details, if alle the expression is too confusing.
As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience! Getting Started in the Community An overview of everything you need to know about navigating the community on one page! Community Links: ○ Power Apps ○ Power Automate ○ Power Pages ○ Copilot Studio Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate ○ Power Pages ○ Copilot Studio Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate ○ Power Pages ○ Copilot Studio Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today! Community Links: ○ Power Apps ○ Power Automate ○ Power Pages ○ Copilot Studio Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps ○ Power Automate ○ Power Pages ○ Copilot Studio Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps ○ Power Automate ○ Power Pages ○ Copilot Studio Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps ○ Power Automate ○ Power Pages ○ Copilot Studio Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps ○ Power Automate ○ Power Pages ○ Copilot Studio Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps ○ Power Automate ○ Power Pages ○ Copilot Studio Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps ○ Power Automate ○ Power Pages ○ Copilot Studio Thank you for being an integral part of our journey. Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!
This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community. Be sure to register & we hope to see all of you there!
We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members. If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond. COMMUNITY HIGHLIGHTS Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do! Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon LATEST NEWS Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog. This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today! Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas! Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks. Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas! Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more! UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI. There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more. And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today! European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more. Click the image below to find out more about #ECS2024 and register today! Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024. This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more. Click the image below for more #Techcon365 intel and register today! For more events, click the image below to visit the Microsoft Community Days website.
It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community. We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community. Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team
Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp
We're thrilled to announce that Ahmed Salih is our Super User of the Month for April 2024. Ahmed has been one of our most active Super Users this year--in fact, he kicked off the year in our Community with this great video reminder of why being a Super User has been so important to him! Ahmed is the Senior Power Platform Architect at Saint Jude's Children's Research Hospital in Memphis. He's been a Super User for two seasons and is also a Microsoft MVP! He's celebrating his 3rd year being active in the Community--and he's received more than 500 kudos while authoring nearly 300 solutions. Ahmed's contributions to the Super User in Training program has been invaluable, with his most recent session with SUIT highlighting an incredible amount of best practices and tips that have helped him achieve his success. Ahmed's infectious enthusiasm and boundless energy are a key reason why so many Community members appreciate how he brings his personality--and expertise--to every interaction. With all the solutions he provides, his willingness to help the Community learn more about Power Platform, and his sheer joy in life, we are pleased to celebrate Ahmed and all his contributions! You can find him in the Community and on LinkedIn. Congratulations, Ahmed--thank you for being a SUPER user!
User | Count |
---|---|
84 | |
51 | |
36 | |
16 | |
13 |
User | Count |
---|---|
100 | |
67 | |
43 | |
30 | |
27 |