cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
Reply
MGeale
Helper II
Helper II

Validate() Function

‎12-28-2023 03:24 PM

Hi all,

 

Hoping someone could give me a bit of a hand regarding my validate function.

TLDR, I have a collection of records, and I want to validate each record before it is patched using the validate function; would be in the displaymode property of the submit button. Example data as follows:

MGeale_0-1703805199901.png

 

I will eventually have the data directly patched into the SP list, 'Log' but for the moment, it goes into a collection while I'm building the app. Log is my SP data source, CountryCode is a SP list/Collection of the world's country codes in the exact same structure as the source. wNumbers is a list of mobile numbers that I have input in colNumbers. The following is how I piece it all together, and create the 'collection' that creates the above table:

 

Clear(TestyMcTestFace);
With(
    {
        wLog: Log,
        wCountryCode: ForAll(
            Trim(
                Split(
                    LookUp(
                        colCountry_Codes,
                        Title = DataCardValue2.Selected.Value
                    ).Country_x0020_Code,
                    Char(44) & Char(32)
                )
            ),
            {
                Value: Substitute(
                    ThisRecord.Value,
                    Char(45),
                    Blank()
                )
            }
        ),
        wNumbers: ForAll(
            Trim(
                Split(
                    Index(
                        colNumbers,
                        1
                    ).Value,
                    Char(44)
                )
            ),
            {Result: ThisRecord.Value}
        )
    },
    With(
        {
            wPatchableData: Ungroup(
                ForAll(
                    wNumbers,
                    ForAll(
                        wCountryCode,
                        If(
                            !IsBlank(Result),
                            {
                                Title: If(
                                    !StartsWith(
                                        Result,
                                        Char(43) & Value
                                    ),
                                    Char(43) & Value & Mid(
                                        Result,
                                        2,
                                        Len(Result) - 1
                                    ),
                                    Result
                                ),
                                Template: DataCardValue1.Selected.Value,
                                Message: DataCardValue3.Text,
                                Country: DataCardValue2.Selected.Value
                            }
                        )
                    )
                ),
                "Value"
            )
        },
        //replace here with patch statement
        Collect(
            TestyMcTestFace,
            wPatchableData
        );
        With(
            {
                wError: If(
                    !IsEmpty(Errors(wLog)),
                    Concat(
                        Errors(wLog),
                        Column & Char(58) & Char(32) & Message
                    )
                )
            },
            //notify if there was a problem patching
            Notify(
                wError,
                NotificationType.Error
            );
        )
    );
    //Clear(TestyMcTestFace)
);

 

 

I know there is a validate function and I would like to validate each row of the TestyMcTestFace collection, before the displayMode property switches to edit and allows for the code to actually be patched. Using what I made for the Collection logic, I made up this code as a bit of a starting point, but I think I'm getting a little tripped up on the Validation logic. 

 

 

With(
    {
        wLog: Log,
        wCountryCode: ForAll(
            Trim(
                Split(
                    LookUp(
                        colCountry_Codes,
                        Title = DataCardValue2.Selected.Value
                    ).Country_x0020_Code,
                    Char(44) & Char(32)
                )
            ),
            {
                Value: Substitute(
                    ThisRecord.Value,
                    Char(45),
                    Blank()
                )
            }
        ),
        wNumbers: ForAll(
            Trim(
                Split(
                    Index(
                        colNumbers,
                        1
                    ).Value,
                    Char(44)
                )
            ),
            {Result: ThisRecord.Value}
        )
    },
    With(
        {
            wPatchableData: Ungroup(
                ForAll(
                    wNumbers,
                    ForAll(
                        wCountryCode,
                        If(
                            !IsBlank(Result),
                            {
                                Title: If(
                                    !StartsWith(
                                        Result,
                                        Char(43) & Value
                                    ),
                                    Char(43) & Value & Mid(
                                        Result,
                                        2,
                                        Len(Result) - 1
                                    ),
                                    Result
                                ),
                                Template: DataCardValue1.Selected.Value,
                                Message: DataCardValue3.Text,
                                Country: DataCardValue2.Selected.Value
                            }
                        )
                    )
                ),
                "Value"
            )
        },
        With(
            {
                wDatatoValidate: Validate(
                    'Log',
                    Defaults('Log'),
                    {Title: ""}
                )
            },
            wDatatoValidate
        )
    )
)

 

 

 

I'm mainly following Matt Devaney's Validate article for the validation side of things, but not 100% sure what I'm doing wrong as he only appears to be following a single-line schema logic.

 

Anyone got any ideas? 

 

Thanks in advance, and have a happy new year!

 

Cheers 

 

Labels:
Message 1 of 10
451 Views
0 Kudos
1 ACCEPTED SOLUTION

Accepted Solutions
MGeale
Helper II
Helper II

‎01-16-2024 04:56 PM

Sorry forgot to come back to everyone regarding this thread. Tried a couple of different solutions and ultimately came up with the following which works a treat.

 

Clear(colInvalidNumbers);
Clear(colValidNumbers);
With(
    {
        wLog: Log,
        wInput: ForAll(
            colNumbers,
            {Result: ThisRecord.FullMatch}
        ),
        wCountry: AddColumns(
            ShowColumns(
                Filter(
                    colCountry_Codes,
                    Title in DataCardValue2.SelectedItems.Value
                ),
                "Country_x0020_Code",
                "E_x002e_164"
            ),
            "Length",
            Len(
                Substitute(
                    E_x002e_164,
                    Char(32),
                    Blank()
                )
            )
        )
    },
    With(
        {
            wPreformatting: ForAll(
                Ungroup(
                    ForAll(
                        wInput,
                        ForAll(
                            wCountry,
                            If(
                                !StartsWith(
                                    Result,
                                    Char(43) & Country_x0020_Code
                                ),
                                Char(43) & Country_x0020_Code & Mid(
                                    Result,
                                    2,
                                    Len(Result) - 1
                                ),
                                Result
                            )
                        )
                    ),
                    "Value"
                ),
                Substitute(
                    Substitute(
                        Value,
                        Char(45),
                        Blank()
                    ),
                    Char(43),
                    Blank()
                )
            )
        },
        ForAll(
            Distinct(
                wPreformatting,
                Value
            ),
            If(
                IsEmpty(
                    Filter(
                        wCountry,
                        Length = Len(Value)
                    )
                ),
                Collect(
                    colInvalidNumbers,
                    Value
                ),
                Collect(
                    colValidNumbers,
                    Patch(
                        Log,
                        Defaults(Log),
                        {
                            Title: Concatenate(Char(43) & Value),
                            Template: {
                                Id: LookUp(
                                    colTemplates,
                                    Title = DataCardValue1.Selected.Value
                                ).ID,
                                Value: DataCardValue1.Selected.Value
                            },
                            Message: DataCardValue3.Text,
                            Country: {
                                Id: LookUp(
                                    colCountry_Codes,
                                    Title = DataCardValue2.Selected.Value
                                ).ID,
                                Value: DataCardValue2.Selected.Value
                            }
                        }
                    )
                );
                If(
                    !IsEmpty(Errors(Log)),
                    Notify(
                        Concat(
                            Errors(Log),
                            Column & ": " & Message
                        ),
                        NotificationType.Error
                    )
                )
            )
        )
    )
);
With(
    {
        wValidNumbers: colValidNumbers,
        wInvalidNumbers: colInvalidNumbers,
        wCountry: Concat(
            Filter(
                colCountry_Codes,
                Title in DataCardValue2.SelectedItems.Value
            ),
            'ISO Codes'
        ),
        wReset: Concurrent(
            ResetForm(Form2),
            Reset(TextInput2),
            Clear(colNumbers)
        )
    },
    ForAll(
        wValidNumbers,
        SendSMS.Run(ID)
    );
    If(
        IsEmpty(wInvalidNumbers),
        wReset,
        If(
            CountRows(wInvalidNumbers) = 1,
            Notify(
                "ERROR: Unable to send message to " & Concat(
                    wInvalidNumbers,
                    Value
                ) & ". Please ensure it is a valid '" & wCountry & "' number and try again.",
                NotificationType.Error
            ),
            Notify(
                "ERROR: Message delivery failed for: " & Concat(
                    wInvalidNumbers,
                    Value & ", " & ". Verify that they're a valid '" & wCountry & "' number and try again. Messages to other numbers were sent successfully."
                ),
                NotificationType.Error
            )
        )
    )
)

 

Thanks all for your help 🙂

View solution in original post

Message 10 of 10
295 Views
9 REPLIES 9
scalca
Solution Supplier
Solution Supplier

‎12-29-2023 01:25 AM

the validate function returns blank in case data passes validation, otherwise it would return an error message

here you'll find some details in the documentation https://learn.microsoft.com/en-us/power-platform/power-fx/reference/function-validate#examples

 

so in your displaymode property of submit button you'll have to add a condition to check whether validation returns blank or error message.

using the If(IsBlank() function you would be able to change displaymode from disabled to edit

I think this is the missing part here

Message 2 of 10
414 Views
0 Kudos
mmbr1606
Super User
Super User

‎12-29-2023 01:33 AM

hey @MGeale 

 

try this:

// Clear existing data in the test collection
Clear(TestyMcTestFace);

// Main logic block
With(
    {
        wLog: Log,
        wCountryCode: ForAll(
            Trim(
                Split(
                    LookUp(
                        colCountry_Codes,
                        Title = DataCardValue2.Selected.Value
                    ).Country_x0020_Code,
                    Char(44) & Char(32)
                )
            ),
            {
                Value: Substitute(
                    ThisRecord.Value,
                    Char(45),
                    Blank()
                )
            }
        ),
        wNumbers: ForAll(
            Trim(
                Split(
                    Index(
                        colNumbers,
                        1
                    ).Value,
                    Char(44)
                )
            ),
            {Result: ThisRecord.Value}
        )
    },
    With(
        {
            wPatchableData: Ungroup(
                ForAll(
                    wNumbers,
                    ForAll(
                        wCountryCode,
                        If(
                            !IsBlank(Result),
                            {
                                Title: If(
                                    !StartsWith(
                                        Result,
                                        Char(43) & Value
                                    ),
                                    Char(43) & Value & Mid(
                                        Result,
                                        2,
                                        Len(Result) - 1
                                    ),
                                    Result
                                ),
                                Template: DataCardValue1.Selected.Value,
                                Message: DataCardValue3.Text,
                                Country: DataCardValue2.Selected.Value
                            }
                        )
                    )
                ),
                "Value"
            )
        },
        // Collect the patchable data
        Collect(
            TestyMcTestFace,
            wPatchableData
        )
    )
);

// Validation and Patching Process
ForAll(
    TestyMcTestFace,
    With(
        {
            CurrentRecord: ThisRecord,
            validationResult: Validate('Log', Defaults('Log'), ThisRecord)
        },
        If(
            validationResult.IsValid,
            // If valid, patch to SharePoint list
            Patch('Log', Defaults('Log'), CurrentRecord),
            // If not valid, possibly collect the invalid records or log the error
            Collect(InvalidRecords, CurrentRecord)
        )
    )
);

// Notification for completion or errors
With(
    {
        wError: If(
            !IsEmpty(Errors(wLog)),
            Concat(
                Errors(wLog),
                Column & Char(58) & Char(32) & Message
            )
        )
    },
    // Notify if there was a problem patching
    Notify(
        wError,
        NotificationType.Error
    )
);

 

Let me know if my answer helped solving your issue.

If it did please accept as solution and give it a thumbs up so we can help others in the community.



Greetings

Message 3 of 10
410 Views
0 Kudos
MGeale
Helper II
Helper II
In response to mmbr1606

‎01-01-2024 01:50 PM

hey @mmbr1606,

 

Apologies for my tardiness. Unless I'm doing something wrong, I can't seem to get your provided validates/patches statement to work; I can't seem to get Validate to operate on a whole row... just a single column.

 

Let me know your thoughts 

Message 4 of 10
382 Views
0 Kudos
mmbr1606
Super User
Super User
In response to MGeale

‎01-02-2024 09:53 AM

please try this instad:

 

// Clear existing data in the test collection
Clear(TestyMcTestFace);

// Main logic block
With(
    {
        wLog: Log,
        wCountryCode: ForAll(
            Trim(
                Split(
                    LookUp(
                        colCountry_Codes,
                        Title = DataCardValue2.Selected.Value
                    ).Country_x0020_Code,
                    Char(44) & Char(32)
                )
            ),
            {
                Value: Substitute(
                    ThisRecord.Value,
                    Char(45),
                    Blank()
                )
            }
        ),
        wNumbers: ForAll(
            Trim(
                Split(
                    Index(
                        colNumbers,
                        1
                    ).Value,
                    Char(44)
                )
            ),
            {Result: ThisRecord.Value}
        )
    },
    With(
        {
            wPatchableData: Ungroup(
                ForAll(
                    wNumbers,
                    ForAll(
                        wCountryCode,
                        If(
                            !IsBlank(Result),
                            {
                                Title: If(
                                    !StartsWith(
                                        Result,
                                        Char(43) & Value
                                    ),
                                    Char(43) & Value & Mid(
                                        Result,
                                        2,
                                        Len(Result) - 1
                                    ),
                                    Result
                                ),
                                Template: DataCardValue1.Selected.Value,
                                Message: DataCardValue3.Text,
                                Country: DataCardValue2.Selected.Value
                            }
                        )
                    )
                ),
                "Value"
            )
        },
        // Collect the patchable data
        Collect(
            TestyMcTestFace,
            wPatchableData
        )
    )
);

// Validation and Patching Process
ForAll(
    TestyMcTestFace,
    With(
        {
            CurrentRecord: ThisRecord,
            validationResult: Validate('Log', Defaults('Log'), CurrentRecord)
        },
        If(
            validationResult.IsValid,
            // If valid, patch to SharePoint list
            Patch('Log', Defaults('Log'), CurrentRecord),
            // If not valid, possibly collect the invalid records or log the error
            Collect(InvalidRecords, CurrentRecord)
        )
    )
);

// Notification for completion or errors
With(
    {
        wError: If(
            !IsEmpty(Errors(wLog)),
            Concat(
                Errors(wLog),
                Column & Char(58) & Char(32) & Message
            )
        )
    },
    // Notify if there was a problem patching
    Notify(
        wError,
        NotificationType.Error
    )
);

 

Let me know if my answer helped solving your issue.

If it did please accept as solution and give it a thumbs up so we can help others in the community.



Greetings

Message 5 of 10
371 Views
0 Kudos
MGeale
Helper II
Helper II

‎01-02-2024 01:36 PM

Something is wigging out with the validate function - particularly the validationResult: Validate('Log', Defaults('Log'), CurrentRecord. Current Record I already had to update because it can't reference itself from within a With block so I just changed it to ThisRecord. 

 

Heres the errors on the Validate Statement.

MGeale_0-1704231352510.png

 

Let me know your thoughts.

 

Message 6 of 10
365 Views
0 Kudos
mmbr1606
Super User
Super User
In response to MGeale

‎01-02-2024 11:21 PM

hey @MGeale 

this is my last guess 

// Clear existing data in the test collection
Clear(TestyMcTestFace);

// Main logic block
With(
    {
        wLog: Log,
        wCountryCode: ForAll(
            Trim(
                Split(
                    LookUp(
                        colCountry_Codes,
                        Title = DataCardValue2.Selected.Value
                    ).Country_x0020_Code,
                    Char(44) & Char(32)
                )
            ),
            {
                Value: Substitute(
                    ThisRecord.Value,
                    Char(45),
                    Blank()
                )
            }
        ),
        wNumbers: ForAll(
            Trim(
                Split(
                    Index(
                        colNumbers,
                        1
                    ).Value,
                    Char(44)
                )
            ),
            {Result: ThisRecord.Value}
        )
    },
    With(
        {
            wPatchableData: Ungroup(
                ForAll(
                    wNumbers,
                    ForAll(
                        wCountryCode,
                        If(
                            !IsBlank(Result),
                            {
                                Title: If(
                                    !StartsWith(
                                        Result,
                                        Char(43) & Value
                                    ),
                                    Char(43) & Value & Mid(
                                        Result,
                                        2,
                                        Len(Result) - 1
                                    ),
                                    Result
                                ),
                                Template: DataCardValue1.Selected.Value,
                                Message: DataCardValue3.Text,
                                Country: DataCardValue2.Selected.Value
                            }
                        )
                    )
                ),
                "Value"
            )
        },
        // Collect the patchable data
        Collect(
            TestyMcTestFace,
            wPatchableData
        )
    )
);

// Custom record validation function
Function CustomRecordValidation(recordToValidate) {
    // Replace this with your specific validation logic
    // For example, check if certain fields meet your criteria
    If(
        IsBlank(recordToValidate.Title) || IsBlank(recordToValidate.Template),
        false, // Invalid record
        true   // Valid record
    )
}

// Validation and Patching Process
ForAll(
    TestyMcTestFace,
    With(
        {
            CurrentRecord: ThisRecord,
            isValid: CustomRecordValidation(CurrentRecord)
        },
        If(
            isValid,
            // If valid, patch to SharePoint list
            Patch('Log', Defaults('Log'), CurrentRecord),
            // If not valid, possibly collect the invalid records or log the error
            Collect(InvalidRecords, CurrentRecord)
        )
    )
);

// Notification for completion or errors
With(
    {
        wError: If(
            !IsEmpty(Errors(wLog)),
            Concat(
                Errors(wLog),
                Column & Char(58) & Char(32) & Message
            )
        )
    },
    // Notify if there was a problem patching
    Notify(
        wError,
        NotificationType.Error
    )
);

 

Let me know if my answer helped solving your issue.

If it did please accept as solution and give it a thumbs up so we can help others in the community.



Greetings

Message 7 of 10
356 Views
0 Kudos
MGeale
Helper II
Helper II

‎01-07-2024 01:56 PM

Hey @mmbr1606,

 

Unfortunately, your above didn't seem to work or rather was throwing out errors. As such, I took a bit of a step back, rethought my logic, and ultimately got it to work. Code is as follows:

Clear(colInvalidNumbers);
Clear(colValidNumbers);
With(
    {
        wLog: Log,
        wInput: ForAll(
            colNumbers,
            {Result: ThisRecord.FullMatch}
        ),
        wCountry: AddColumns(
            ShowColumns(
                Filter(
                    colCountry_Codes,
                    Title in DataCardValue5.SelectedItems.Value
                ),
                "Country_x0020_Code",
                "E_x002e_164"
            ),
            "Length",
            Len(
                Substitute(
                    E_x002e_164,
                    Char(32),
                    Blank()
                )
            )
        )
    },
    With(
        {
            wPreformatting: ForAll(
                Ungroup(
                    ForAll(
                        wInput,
                        ForAll(
                            wCountry,
                            If(
                                !StartsWith(
                                    Result,
                                    Char(43) & Country_x0020_Code
                                ),
                                Char(43) & Country_x0020_Code & Mid(
                                    Result,
                                    2,
                                    Len(Result) - 1
                                ),
                                Result
                            )
                        )
                    ),
                    "Value"
                ),
                Substitute(
                    Substitute(
                        Value,
                        Char(45),
                        Blank()
                    ),
                    Char(43),
                    Blank()
                )
            )
        },
        ForAll(
            Distinct(
                wPreformatting,
                Value
            ),
            If(
                IsEmpty(
                    Filter(
                        wCountry,
                        Length = Len(Value)
                    )
                ),
                Collect(
                    colInvalidNumbers,
                    Value
                ),
                Collect(
                    colValidNumbers,
                    Patch(
                        Log,
                        Defaults(Log),
                        {
                            Title: Concatenate(Char(43) & Value),
                            Template: {
                                Id: LookUp(
                                    colTemplates,
                                    Title = DataCardValue4.Selected.Value
                                ).ID,
                                Value: DataCardValue4.Selected.Value
                            },
                            Message: DataCardValue6.Text,
                            Country: {
                                Id: LookUp(
                                    colCountry_Codes,
                                    Title = DataCardValue5.Selected.Value
                                ).ID,
                                Value: DataCardValue5.Selected.Value
                            }
                        }
                    )
                );
                If(
                    !IsEmpty(Errors(Log)),
                    Notify(
                        Concat(
                            Errors(Log),
                            Column & ": " & Message
                        ),
                        NotificationType.Error
                    )
                )
            )
        )
    )
);
With(
    {
        wValidNumbers: colValidNumbers,
        wInvalidNumbers: colInvalidNumbers,
        wCountry: Concat(
            Filter(
                colCountry_Codes,
                Title in DataCardValue5.SelectedItems.Value
            ),
            ISO_x0020_Codes
        ),
        wReset: Concurrent(
            ResetForm(Form3),
            Reset(TextInput3)
        )
    },
    ForAll(
        wValidNumbers,
        SendSMS.Run(ID)
    );
    If(
        IsEmpty(wInvalidNumbers),
        wReset,
        If(
            CountRows(wInvalidNumbers) = 1,
            Notify(
                "ERROR: Unable to send message to " & Concat(
                    wInvalidNumbers,
                    Value
                ) & ". Please ensure it is a valid " & wCountry & " number and try again.",
                NotificationType.Error
            ),
            Notify(
                "ERROR: Message delivery failed for: " & Concat(
                    wInvalidNumbers,
                    Value & ", " & ". Verify that they're a valid " & wCountry & " number and try again. Messages to other numbers were sent successfully."
                ),
                NotificationType.Error
            )
        )
    )
)

 

However, one thing I would appreciate your two cents on is the displaymode logic Devaney has done in the tutorial. Now understandably, I'm doing the logic slightly different because of the fact that I'm doing the validation on a bunch of records versus a singular string which is what the Validate() function I think is intended for. As such, here is the logic that I've managed to do up on the  displayMode, but for some reason, it always seem to invert - I've tried IsEmpty on the table, but can never seem to get it to work. Any ideas? Bit of a brain fart!

With(
    {
        wCheck: ForAll(
            With(
                {
                    wLog: Log,
                    wInput: ForAll(
                        colNumbers,
                        {Result: ThisRecord.FullMatch}
                    ),
                    wCountry: AddColumns(
                        ShowColumns(
                            Filter(
                                colCountry_Codes,
                                Title in DataCardValue5.SelectedItems.Value
                            ),
                            "Country_x0020_Code",
                            "E_x002e_164"
                        ),
                        "Length",
                        Len(
                            Substitute(
                                E_x002e_164,
                                Char(32),
                                Blank()
                            )
                        )
                    )
                },
                With(
                    {
                        wPreformatting: ForAll(
                            Ungroup(
                                ForAll(
                                    wInput,
                                    ForAll(
                                        wCountry,
                                        If(
                                            !StartsWith(
                                                Result,
                                                Char(43) & Country_x0020_Code
                                            ),
                                            Char(43) & Country_x0020_Code & Mid(
                                                Result,
                                                2,
                                                Len(Result) - 1
                                            ),
                                            Result
                                        )
                                    )
                                ),
                                "Value"
                            ),
                            Substitute(
                                Substitute(
                                    Value,
                                    Char(45),
                                    Blank()
                                ),
                                Char(43),
                                Blank()
                            )
                        )
                    },
                    ForAll(
                        Distinct(
                            wPreformatting,
                            Value
                        ),
                        If(
                            IsEmpty(
                                Filter(
                                    wCountry,
                                    Length = Len(Value)
                                )
                            ),
                            Concatenate(Char(43) & Value),
                            Blank()
                        )
                    )
                )
            ),
            Validate(
                'Log',
                Defaults('Log'),
                {
                    Title: Value,
                    Template: {
                        Id: LookUp(
                            ShowColumns(
                                colTemplates,
                                "Title",
                                "ID"
                            ),
                            Title = DataCardValue4.Selected.Value
                        ).ID,
                        Value: DataCardValue4.Selected.Value
                    },
                    Message: DataCardValue6.Text,
                    Country: {
                        Id: LookUp(
                            ShowColumns(
                                colCountry_Codes,
                                "Title",
                                "ID"
                            ),
                            Title = DataCardValue5.Selected.Value
                        ).ID,
                        Value: DataCardValue5.Selected.Value
                    }
                }
            )
        )
    },
    If(
        IsEmpty(wCheck),
        DisplayMode.Edit,
        DisplayMode.Disabled
    )
)

 

Message 8 of 10
334 Views
0 Kudos
mmbr1606
Super User
Super User
In response to MGeale

‎01-07-2024 11:53 PM

do you get any error messages, or something similar? Or how does the issue show up?

Message 9 of 10
320 Views
0 Kudos
MGeale
Helper II
Helper II

‎01-16-2024 04:56 PM

Sorry forgot to come back to everyone regarding this thread. Tried a couple of different solutions and ultimately came up with the following which works a treat.

 

Clear(colInvalidNumbers);
Clear(colValidNumbers);
With(
    {
        wLog: Log,
        wInput: ForAll(
            colNumbers,
            {Result: ThisRecord.FullMatch}
        ),
        wCountry: AddColumns(
            ShowColumns(
                Filter(
                    colCountry_Codes,
                    Title in DataCardValue2.SelectedItems.Value
                ),
                "Country_x0020_Code",
                "E_x002e_164"
            ),
            "Length",
            Len(
                Substitute(
                    E_x002e_164,
                    Char(32),
                    Blank()
                )
            )
        )
    },
    With(
        {
            wPreformatting: ForAll(
                Ungroup(
                    ForAll(
                        wInput,
                        ForAll(
                            wCountry,
                            If(
                                !StartsWith(
                                    Result,
                                    Char(43) & Country_x0020_Code
                                ),
                                Char(43) & Country_x0020_Code & Mid(
                                    Result,
                                    2,
                                    Len(Result) - 1
                                ),
                                Result
                            )
                        )
                    ),
                    "Value"
                ),
                Substitute(
                    Substitute(
                        Value,
                        Char(45),
                        Blank()
                    ),
                    Char(43),
                    Blank()
                )
            )
        },
        ForAll(
            Distinct(
                wPreformatting,
                Value
            ),
            If(
                IsEmpty(
                    Filter(
                        wCountry,
                        Length = Len(Value)
                    )
                ),
                Collect(
                    colInvalidNumbers,
                    Value
                ),
                Collect(
                    colValidNumbers,
                    Patch(
                        Log,
                        Defaults(Log),
                        {
                            Title: Concatenate(Char(43) & Value),
                            Template: {
                                Id: LookUp(
                                    colTemplates,
                                    Title = DataCardValue1.Selected.Value
                                ).ID,
                                Value: DataCardValue1.Selected.Value
                            },
                            Message: DataCardValue3.Text,
                            Country: {
                                Id: LookUp(
                                    colCountry_Codes,
                                    Title = DataCardValue2.Selected.Value
                                ).ID,
                                Value: DataCardValue2.Selected.Value
                            }
                        }
                    )
                );
                If(
                    !IsEmpty(Errors(Log)),
                    Notify(
                        Concat(
                            Errors(Log),
                            Column & ": " & Message
                        ),
                        NotificationType.Error
                    )
                )
            )
        )
    )
);
With(
    {
        wValidNumbers: colValidNumbers,
        wInvalidNumbers: colInvalidNumbers,
        wCountry: Concat(
            Filter(
                colCountry_Codes,
                Title in DataCardValue2.SelectedItems.Value
            ),
            'ISO Codes'
        ),
        wReset: Concurrent(
            ResetForm(Form2),
            Reset(TextInput2),
            Clear(colNumbers)
        )
    },
    ForAll(
        wValidNumbers,
        SendSMS.Run(ID)
    );
    If(
        IsEmpty(wInvalidNumbers),
        wReset,
        If(
            CountRows(wInvalidNumbers) = 1,
            Notify(
                "ERROR: Unable to send message to " & Concat(
                    wInvalidNumbers,
                    Value
                ) & ". Please ensure it is a valid '" & wCountry & "' number and try again.",
                NotificationType.Error
            ),
            Notify(
                "ERROR: Message delivery failed for: " & Concat(
                    wInvalidNumbers,
                    Value & ", " & ". Verify that they're a valid '" & wCountry & "' number and try again. Messages to other numbers were sent successfully."
                ),
                NotificationType.Error
            )
        )
    )
)

 

Thanks all for your help 🙂

Message 10 of 10
296 Views

Helpful resources

Announcements
April 2024 Commnuity Newsletter

April 2024 Commnuity Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!     Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!     Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!     UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!     European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!   Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!   For more events, click the image below to visit the Microsoft Community Days website.    

Tuesday Tip | Update Your Community Profile Today!

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Hear what's next for the Power Up Program

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip: Community User Groups

Tuesday Tip: Community User Groups

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: Community User Groups and YOU Being part of, starting, or leading a User Group can have many great benefits for our community members who want to learn, share, and connect with others who are interested in the Microsoft Power Platform and the low-code revolution.   When you are part of a User Group, you discover amazing connections, learn incredible things, and build your skills. Some User Groups work in the virtual space, but many meet in physical locations, meaning you have several options when it comes to building community with people who are learning and growing together!   Some of the benefits of our Community User Groups are: Network with like-minded peers and product experts, and get in front of potential employers and clients.Learn from industry experts and influencers and make your own solutions more successful.Access exclusive community space, resources, tools, and support from Microsoft.Collaborate on projects, share best practices, and empower each other. These are just a few of the reasons why our community members love their User Groups. Don't wait. Get involved with (or maybe even start) a User Group today--just follow the tips below to get started.For current or new User Group leaders, all the information you need is here: User Group Leader Get Started GuideOnce you've kicked off your User Group, find the resources you need:  Community User Group ExperienceHave questions about our Community User Groups? Let us know! We are here to help you!

Super User of the Month | Ahmed Salih

Super User of the Month | Ahmed Salih

We're thrilled to announce that Ahmed Salih is our Super User of the Month for April 2024. Ahmed has been one of our most active Super Users this year--in fact, he kicked off the year in our Community with this great video reminder of why being a Super User has been so important to him!   Ahmed is the Senior Power Platform Architect at Saint Jude's Children's Research Hospital in Memphis. He's been a Super User for two seasons and is also a Microsoft MVP! He's celebrating his 3rd year being active in the Community--and he's received more than 500 kudos while authoring nearly 300 solutions. Ahmed's contributions to the Super User in Training program has been invaluable, with his most recent session with SUIT highlighting an incredible amount of best practices and tips that have helped him achieve his success.   Ahmed's infectious enthusiasm and boundless energy are a key reason why so many Community members appreciate how he brings his personality--and expertise--to every interaction. With all the solutions he provides, his willingness to help the Community learn more about Power Platform, and his sheer joy in life, we are pleased to celebrate Ahmed and all his contributions! You can find him in the Community and on LinkedIn. Congratulations, Ahmed--thank you for being a SUPER user!  

Tuesday Tip: Getting Started with Private Messages & Macros

Tuesday Tip: Getting Started with Private Messages & Macros

Welcome to TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   This Week's Tip: Private Messaging & Macros in Power Apps Community   Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member!   Our Knowledge Base article about private messaging and macros is the best place to find out more. Check it out today and discover some key tips and tricks when it comes to messages and macros:   Private Messaging: Learn how to enable private messages in your community profile and ensure you’re connected with other community membersMacros Explained: Discover the convenience of macros—prewritten text snippets that save time when posting in forums or sending private messagesCreating Macros: Follow simple steps to create your own macros for efficient communication within the Power Apps CommunityUsage Guide: Understand how to apply macros in posts and private messages, enhancing your interaction with the Community For detailed instructions and more information, visit the full page in your community today:Power Apps: Enabling Private Messaging & How to Use Macros (Power Apps)Power Automate: Enabling Private Messaging & How to Use Macros (Power Automate)  Copilot Studio: Enabling Private Messaging &How to Use Macros (Copilot Studio) Power Pages: Enabling Private Messaging & How to Use Macros (Power Pages)

Top Solution Authors
View All
Top Kudoed Authors
View All
Users online (3,371)