cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
dgillespie
Advocate II
Advocate II

Flow Ownership and SharePoint - Best practices

Just getting started with Flow in our company and before a few of us make a ton of them, I'd like to know the best practices when it comes to SharePoint.  A typical scenario would be:

  1. UserA makes a flow which requires certain permissions on SP doc libraries and lists
  2. UserA leaves company
  3. Ownership of flow changes to new hire UserB
  4. Flow won't run because of permissions

So UserB will not always get the same permissions that UserA had.  What are the best practices then?

  • create an office 365 account just for making flows?  This user would have to have a lot of SP permissions then!
  • redo the flows with UserB in mind?

Thanks for you help!

1 ACCEPTED SOLUTION

Accepted Solutions
dgillespie
Advocate II
Advocate II

Thanks everyone for your replies.

 

Here is what we settled with: I created a Flow Admin account and assigned it a Business Premium license.  UserA creates the flow and adds me as an Owner.  I assign the Flow Admin permissions to that SP site/library.  Finally, I add the Flow Admin as an owner to the Flow and change the SP credentials on the Flow to the Flow Admins.

View solution in original post

14 REPLIES 14
v-monli-msft
Community Support
Community Support

Hi @dgillespie,

 

It seems that there is no easy way to solve this issue. The 2 ways you told are all the way I could think of to solve this. I think the first one would be the better way as this will avoid the following issue that if UserB also left later.

 

Sorry for the inconvenience.

 

Regards,

Mona

Community Support Team _ Mona Li
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
sergeluca
Memorable Member
Memorable Member

we create a dedicated account (we call that a "Flow service account")

 

Mike2500
Super User
Super User

Permissions in SharePoint are often handled via groups. In that case, if UserB is simply put into the same groups as UserA, then the transfer should work fine. If UserB shouldn't have the same permissions as UserA, then why are they getting the ownership of the Flow? Perhaps the concern is that there are multliple flows, at which point each flow should be reviewed to determine if it should be kept or transferred. Of course, this is a huge challenge as there's no way to know which flows are the mission critical flows vs flows that were created as an experiment, unless each flow is reviewed by a knowledgable user.

 

It's been mentioned here and elsewhere to use a service account. This sounds good, but there seems to be a lot of permissions issues with this:

 

1. Do we give users the username/pwd of the service account? I hope not, as this would violate best practices for accounts

2. Do we have an admin switch the connections to use the service account? Sounds good, but then the user could go back, modify the flow, and via that connection they then have access to content in libraries they normally wouldn't have access.

 

Or, perhaps having to do anything means that the IT dept has already failed, as perhaps mission critical flows should have been recreated as a logic app and deployed to Azure, which brings other benefits such as proper source control.

Thank you for the reply.  There may be an issue with logging in as the Service Account to create the flows.

 

So the administration may look like this?

  1. Flow Service account, UserA, UserB are all in same SP group
  2. FlowA is created by UserA and also owned by Flow Service Account and UserB
  3. UserA leaves and his/her account is deleted
  4. FlowA still works?

My understanding is that the flow will still run. (this is pretty critical info, I wish the docs were clear). However: if the workflow connected to a SharePoint list, for example, then the flow will have a data connection for that list. If the data connection is using UserA's credentials, then the flow will fail because UserA no longer has permission to the SharePoint list.

 

So there are two questions:

1. who owns the flow?

2. what accounts are used in the data connections in the flow?

 

#1 Doesn't seem to be the critical piece, as again, I think the flow will still run even if the owner left. We just need to transfer ownership for maintenance reasons. (please double-check me on this).

#2 is critical, as if a user's account is disabled/deleted, then any data connection using that account should immediately fail the very next time the flow is run. (At which point, a different owner will need to sign in to flow and modify the data connections to use a different account).

 

So in your scenario, there's not enough info to know if the flow will work. It's my understanding that the flow will try to run, but if UserA created a connection using their own credentials, then the flow will fail on that step due to their account being disabled/deleted.

 

So, another scenario is that UserA could create a flow, and then when connecting to a SharePoint list in the flow, they could use the credentials of a service account. When UserA left, the flow would continue to run, as the credentials for the list are still good. (But again, giving users a username/password of a different account is not a best practice)

Yes, Mike, this gets to the detail of the issue: what account to use for the SP connector?  Using the Flow Service account seems to be the best practice but you are right about sharing credentials; also, the user would always have to make sure he/she was logged in as the Flow Service Account. 

 

Either way, it seems like a lot of manual administration here: keeping track of who has access to the Flow Service Account, changing the password when a member user left, and what about setting up a Flow Service account per dept.?

The user doesn't have to be logged in as that account, per se, as they can specify whichever credentials when they create the data connection. So, UserA logs into Flow.microsoft.com, and they create a flow (which means that UserA is the Owner).When they connect to SharePoint, the connection might default to use their account, but they could just click a little drop-down menu and select to use a different set of credentials, at which point they could enter the username/pwd of the service account.

 

I certainly agree that any system is going to be a hassle. Even having a service account isn't necessarily better than just having the new owner sign in and update the credentials. The non-service account method also has the benefit of getting someone from the dept to look at the flows and get rid of unnecessary ones. While flows that use service accounts will always run successfully, the downside is that they will keep running successfully for years, even when they're no longer needed or useful.

 

In my first reply, I mentioned logic apps. To bring that subject up again, if you check out Microsoft's guidance around this, they clearly state that Flow is for "Self-service", while Logic Apps are for "Mission Critical" scenarios.  And, one can take an existing flow, export it as a logic app and then import it into the azure service.

 

So, perhaps the workable scenario is that UserA leaves, and ManagerA compains that UserA's flow is failing. IT then converts UserA's flow to a Logic App and configures it to run via a service account. No further issues are experienced with that particular flow.

 

After all, another scenario is that ownership is given to UserB, who goes to update the Flow, but doesn't really know how to use flow, and in the process they break the flow. Since Flow has no undo capabilities and no version history, UserB calls IT and asks them to rebuild the flow, despite the fact there is no documentation and no one else really knew exactly what it did. Both ManagerA and UserB then spend the next 6 months compaining that IT isn't very helpful.

dgillespie
Advocate II
Advocate II

Thanks everyone for your replies.

 

Here is what we settled with: I created a Flow Admin account and assigned it a Business Premium license.  UserA creates the flow and adds me as an Owner.  I assign the Flow Admin permissions to that SP site/library.  Finally, I add the Flow Admin as an owner to the Flow and change the SP credentials on the Flow to the Flow Admins.

Question- We have a Flow that sends outbound emails using the account of the user who created the flow. What would happen if the person leaves the organization, how will the outbound emails o when the mailbox is no longer active? I know that in the 'Send Email' action a "From" account can be specified for sending an email, but is it a good practice to do so or should we have a dedicated account(with an attached mailbox) for flows?

 

The information I am seeking- 

 

1. In terms of best practice, should we be creating a dedicated service account for flows? If yes, should the flows created by users be shared with this service account so they can be managed using one account?

2. What license should be assigned to the service account, E3 or E5?

3.  Should this account be assigned the global admin privileges?

 

Thank you.

andeeh1974
Frequent Visitor

Has anyone from Microsoft replied to this thread?   Some clarity on what options we have in Flow would be helpful 

 

We have items that are created by UserA but then when the flow runs, it shows modified by FlowUser.  

 

Really what I would want is the flow to keep the original created by user as the modified by user.  

 

@andeeh1974,  I wholeheartedly agree that clarification from Microsoft on user accounts would be VERY helpful (either here or in the docs....though from the PowerApps learning-curve I've pretty much given up on my old-school mindset that official docs will ever again be up-to-date. Time and tech marches on!).

 

Yo, Microsoftians!
Specifically tricky is dealing with automation flows that use the O365 User connector/object and the Outlook.com connector.    All my years of using service accounts as Best Practice seem meaningless for Flow.  If, as another commented, that MS's perspective is that Flow is for "self-service" and we need to use Azure Logic Apps for enterprise-managed automation/workflows, it would be nice for them to be more explicit about that.  In my opinion their Flow demos sure fail to make that distinction.  If Flow is simply an MS-flavored answer to IFTTT, so be it (just say so).  But I'm still hoping it is the powerful enterprise-grade automation tool our organization needs (and which our IT team needs to be able to manage).

I hate to hear myself saying this, but SharePoint Designer (FOR Christ's sake!) was clearer and more capable (it seems) for handling user impersonation/user-context-switching.  I'm sure hoping that impression is wrong.  I know many things in PowerApps that were impossible a year ago now are possible...yet remain widely discussed online as if the old was still current.  It isn't that the official docs are not kept updated...it's just that they are too sparse in their details regarding real-world usage.  PowerApps and Flow would be impossible to learn, IMO, if not for these forums and other community-generated content (shout out to Shane Young!).


DanyElHoyek
Advocate IV
Advocate IV

What are you using as Names for the service accounts?

Anonymous
Not applicable

I have the same question - as it is an old post, is it the same solution today?  

 

If someone could point me in the direction to how i can identify which part of the flow is linked to a spesific useraccount i would appreciate it.

 

We have the case where a creator quit the company, the flow was moved to a new owner, but it does not run. And i am finding it hard to shift the ownership within the flow. 

 

 

Yes, @Anonymous , you need to go through the flow and look at each action that has a user-based connection (e.g. newer SQL Server connections, O365 actions such as Send Email, Word Online, OneDrive) and select a new connection which is using a current user (ideally a service account instead of an actual user's account).  This is done using the ellipses on the right side of the actions in Flow.  Here is a thread that provides some screenshots and better detail:  https://powerusers.microsoft.com/t5/General-Power-Automate/Need-to-use-another-User-s-connections-on-a-Flow/m-p/509441#M47881

Helpful resources

Announcements

Celebrating the June Super User of the Month: Markus Franz

Markus Franz is a phenomenal contributor to the Power Apps Community. Super Users like Markus inspire others through their example, encouragement, and active participation.    The Why: "I do this to help others achieve what they are trying to do. As a total beginner back then without IT background I know how overwhelming things can be, so I decided to jump in and help others. I also do this to keep progressing and learning myself." Thank you, Markus Franz, for your outstanding work! Keep inspiring others and making a difference in the community! 🎉  Keep up the fantastic work! 👏👏 Markus Franz | LinkedIn  Power Apps: mmbr1606  

Copilot Cookbook Challenge | Week 1 Results | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge is a great way to showcase your creativity and connect with others. Plus, you could win tickets to the Power Platform Community Conference in Las Vegas in September 2024 as an amazing bonus.   Two ways to enter: 1. Copilot Studio Cookbook Gallery:  https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge.   Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  @Dhanush 2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a

Your Moment to Shine: 2024 PPCC’s Got Power Awards Show

For the third year, we invite you, our talented community members, to participate in the grand 2024 Power Platform Community Conference's Got Power Awards. This event is your opportunity to showcase solutions that make a significant business impact, highlight extensive use of Power Platform products, demonstrate good governance, or tell an inspirational story. Share your success stories, inspire your peers, and show off some hidden talents.  This is your time to shine and bring your creations into the spotlight!  Make your mark, inspire others and leave a lasting impression. Sign up today for a chance to showcase your solution and win the coveted 2024 PPCC’s Got Power Award. This year we have three categories for you to participate in: Technical Solution Demo, Storytelling, and Hidden Talent.      The Technical solution demo category showcases your applications, automated workflows, copilot agentic experiences, web pages, AI capabilities, dashboards, and/or more. We want to see your most impactful Power Platform solutions!  The Storytelling category is where you can share your inspiring story, and the Hidden Talent category is where your talents (such as singing, dancing, jump roping, etc.) can shine! Submission Details:  Fill out the submission form https://aka.ms/PPCCGotPowerSignup by July 12th with details and a 2–5-minute video showcasing your Solution impact. (Please let us know you're coming to PPCC, too!)After review by a panel of Microsoft judges, the top storytellers will be invited to present a virtual demo presentation to the judges during early August. You’ll be notified soon after if you have been selected as a finalist to share your story live at PPCC’s Got Power!  The live show will feature the solution demos and storytelling talents of the top contestants, winner announcements, and the opportunity to network with your community.  It's not just a showcase for technical talent and storytelling showmanship, show it's a golden opportunity to make connections and celebrate our Community together! Let's make this a memorable event! See you there!   Mark your calendars! Date and Time: Thursday, Sept 19th Location: PPCC24 at the MGM Grand, Las Vegas, NV 

Tuesday Tip | Accepting Solutions

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   To enhance our collaborative environment, it's important to acknowledge when your question has been answered satisfactorily. Here's a quick guide on how to accept a solution to your questions: Find the Helpful Reply: Navigate to the reply that has effectively answered your question.Accept as Solution: Look for the "Accept as Solution" button or link, usually located at the bottom of the reply.Confirm Your Selection: Clicking this button may prompt you for confirmation. Go ahead and confirm that this is indeed the solution.Acknowledgment: Once accepted, the reply will be highlighted, and the original post will be marked as "Solved". This helps other community members find the same solution quickly. By marking a reply as an accepted solution, you not only thank the person who helped you but also make it easier for others with similar questions to find answers. Let's continue to support each other by recognizing helpful contributions. 

Reminder: To register for the Community Ambassador Call on June 13th

Calling all Super Users & User Group Leaders   Reminder: To register for the Community Ambassador Call on June 13th—for an exclusive event for User Group Leaders and Super Users! This month is packed with exciting updates and activities within our community.   What's Happening: Community Updates: We'll share the latest developments and what's new in our vibrant community.Special Guest Speaker: Get ready for an insightful talk and live demo of Microsoft Copilot Studio templates by our special guest.Regular Updates: Stay informed with our routine updates for User Groups and Super Users.Community Insights: We'll provide general information about ongoing and upcoming community initiatives. Don't Miss Out: Register Now: Choose the session that fits your schedule best.Check your private messages or Super User Forum for registration links. We're excited to connect with you and continue building a stronger community together.   See you at the call!  

May 2024 Community Newsletter

It's time for the May Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.        COMMUNITY HIGHLIGHTS Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzcreativeopinionExpiscornovusFubarAmikNived_NambiarPstork1OliverRodriguesmmbr1606ManishSolankiMattJimisonragavanrajantimlSudeepGhatakNZrenatoromaoLucas001iAm_ManCatAlexEncodianfernandosilvaOOlashynJmanriqueriosChriddle  BCBuizerExpiscornovus  a33ikBCBuizer  SebSDavid_MA  dpoggermannPstork1     LATEST NEWS   We saw a whole host of amazing announcements at this year's #MSBuild, so we thought we'd share with you a bite sized breakdown of the big news via blogs from Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab, and ✊🏾Justin Graham :   New ways of development with copilots and Microsoft Power PlatformRevolutionize the way you work with Automation and AIPower Apps is making it easier for developers to build with Microsoft Copilot and each otherCopilot in Microsoft Fabric is now generally available in Power BIUnlock new levels of productivity with Microsoft Dataverse and Microsoft Copilot StudioMicrosoft Copilot Studio: Building copilots with agent capabilitiesMicrosoft Power Pages is bringing the new standard in secure, AI-powered capabilities   If you'd like to relive some of the highlights from Microsoft Build 2024, click the image below to watch a great selection of on-demand Keynotes and sessions!         WorkLab Podcast with Charles Lamanna   Check out the latest episode of the WorkLab podcast with CVP of Business Apps and Platforms at Microsoft, Charles Lamanna, as he explains the ever-expanding evolution of Copilot, and how AI is offering new opportunities for business leaders. Grab yourself a coffee and click the image below to take a listen.       Event Recap: European Collaboration and Cloud Summits 2024   Click the image below to read a great recap by Mark Kashman about the recent European Collaboration Summit and European Cloud Summit held in Germany during May 2024. Great work everybody!       UPCOMING EVENTS European Power Platform Conference - SOLD OUT! Congrats to everyone who managed to grab a ticket for the now SOLD OUT European Power Platform Conference, which takes place in beautiful Brussels, Belgium, on 11-13th June. With a great keynote planned from Ryan Cunningham and Sangya Singh, plus expert sessions from the likes of Aaron Rendell, Amira Beldjilali, Andrew Bibby, Angeliki Patsiavou, Ben den Blanken, Cathrine Bruvold, Charles Sexton, Chloé Moreau, Chris Huntingford, Claire Edgson, Damien Bird, Emma-Claire Shaw, Gilles Pommier, Guro Faller, Henry Jammes, Hugo Bernier, Ilya Fainberg, Karen Maes, Lindsay Shelton, Mats Necker, Negar Shahbaz, Nick Doelman, Paulien Buskens, Sara Lagerquist, Tricia Sinclair, Ulrikke Akerbæk, and many more, it looks like the E in #EPPC24 stands for Epic!   Click the image below for a full run down of the exciting sessions planned, and remember, you'll need to move quickly for tickets to next year's event!       AI Community Conference - New York - Friday 21st June Check out the AI Community Conference, which takes place at the Microsoft Corporate building on Friday 21st June at 11 Times Square in New York City. Here, you'll have the opportunity to explore the latest trends and breakthroughs in AI technology alongside fellow enthusiasts and experts, with speakers on the day including Arik Kalininsky, Sherry Xu, Xinran Ma, Jared Matfess, Mihail Mateev, Andrei Khaidarov, Ruven Gotz, Nick Brattoli, Amit Vasu, and more. So, whether you're a seasoned professional or just beginning your journey into AI, click the image below to find out more about this exciting NYC event.       TechCon365 & Power Platform Conference - D.C. - August 12-16th ** EARLY BIRD TICKETS END MAY 31ST! ** Today's the perfect time to grab those early bird tickets for the D.C. TechCon365 & PWRCON Conference at the Walter E Washington Center on August 12-16th! Featuring the likes of Tamara Bredemus, Sunny Eltepu, Lindsay Shelton, Brian Alderman, Daniel Glenn, Julie Turner, Jim Novak, Laura Rogers, Microsoft MVP, John White, Jason Himmelstein, Luc Labelle, Emily Mancini, MVP, UXMC, Fabian Williams, Emma Wiehe, Amarender Peddamalku, and many more, this is the perfect event for those that want to gain invaluable insights from industry experts. Click the image below to grab your tickets today!         Power Platform Community Conference - Sept. 18-20th 2024 Check out some of the sessions already planned for the Power Platform Community Conference in Las Vegas this September. Holding all the aces we have Kristine Kolodziejski, Lisa Crosbie, Daniel Christian, Dian Taylor, Scott Durow🌈, David Yack, Michael O. and Aiden Kaskela, who will be joining the #MicrosoftCommunity for a series of high-stakes sessions! Click the image below to find out more as we go ALL-IN at #PPCC24!       For more events, click the image below to visit the Community Days website.    

Users online (5,400)